Too many send on aprs.fi

Jérémie

unread,

Nov 11, 2014, 8:33:11 AM11/11/14

to dix...@googlegroups.com

Hi,

I'm using Dixprs 2.2.2, and i'm working with direwolf (AGWPE config)

In fact, I found duplicate information sended to aprs.fi in the same lap time, and I don't understand why ... ?

This part, is the first hour of Dixprs + Direwolf execution. But it's not also on startup, it's regular

2014-11-11 02:18:20 CET: HB9FLL-3>APDI22,HB4FV-4*,WIDE2-2,qAR,HB9AVQ-10:>DIXPRS 2.2.2 up and running
2014-11-11 02:18:20 CET: HB9FLL-3>APDI22,HB4FV-4*,WIDE2-2,qAR,HB9BA-2:>DIXPRS 2.2.2 up and running<0x00>
2014-11-11 02:18:24 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:>Connected to T2HUN count 1/0
2014-11-11 02:18:25 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:>Connected to T2HUN count 1/0<0x00>
2014-11-11 02:19:19 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2<0x00>
2014-11-11 02:19:19 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=6,DIR_CNT=2,RF_CNT=8,RFPORT_ID=0<0x00>
2014-11-11 02:19:20 CET: HB9FLL-3>APDI22,HB9AR-4,WIDE1*,WIDE2-2,qAR,F6IKY-2:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2
2014-11-11 02:19:20 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2<0x00><0x00>
2014-11-11 02:19:22 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=6,DIR_CNT=2,RF_CNT=8,RFPORT_ID=0<0x00><0x00>
2014-11-11 02:19:23 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2<0x00><0x00><0x00>
2014-11-11 02:19:24 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=6,DIR_CNT=2,RF_CNT=8,RFPORT_ID=0<0x00><0x00><0x00>
2014-11-11 02:19:25 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2<0x00><0x00><0x00><0x00>
2014-11-11 02:19:27 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=6,DIR_CNT=2,RF_CNT=8,RFPORT_ID=0<0x00><0x00><0x00><0x00>
2014-11-11 02:19:30 CET: HB9FLL-3>APDI22,HB9FLL-3,HB9FLL-3,F5ZFL-4,F8KLY-3*,qAR,F5GJJ-4:<IGATE,MSG_CNT=0,LOC_CNT=6,DIR_CNT=2,RF_CNT=8,RFPORT_ID=0
2014-11-11 02:20:17 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2
2014-11-11 02:20:17 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=7,DIR_CNT=2,RF_CNT=9,RFPORT_ID=all
2014-11-11 02:33:17 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:T#300,103,11,36,5,32,10000000
2014-11-11 02:33:17 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN::HB9FLL-3 :PARM.RxTot,RxDir,RxTot,RxDir,TxTot,WEB,NWS,BOM
2014-11-11 02:33:17 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN::HB9FLL-3 :EQNS.0,1,0,0,1,0,0,1,0,0,1,0,0,1,0
2014-11-11 02:33:17 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN::HB9FLL-3 :UNIT.pkt/15m,pkt/15m,stn/15m,stn/15m,pkt/15m,on,off,off
2014-11-11 02:48:17 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:T#301,74,5,41,5,13,10000000
2014-11-11 02:49:18 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2<0x00>
2014-11-11 02:49:19 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=35,DIR_CNT=6,RF_CNT=55,RFPORT_ID=0<0x00>
2014-11-11 02:49:20 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2<0x00><0x00>
2014-11-11 02:49:21 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=35,DIR_CNT=6,RF_CNT=55,RFPORT_ID=0<0x00><0x00>
2014-11-11 02:49:21 CET: HB9FLL-3>APDI22,HB4FV-4*,WIDE2-1,qAS,HB9UQY:<IGATE,MSG_CNT=0,LOC_CNT=35,DIR_CNT=6,RF_CNT=55,RFPORT_ID=0
2014-11-11 02:49:22 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2<0x00><0x00><0x00>
2014-11-11 02:49:24 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=35,DIR_CNT=6,RF_CNT=55,RFPORT_ID=0<0x00><0x00><0x00>
2014-11-11 02:49:25 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2<0x00><0x00><0x00><0x00>
2014-11-11 02:49:26 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=35,DIR_CNT=6,RF_CNT=55,RFPORT_ID=0<0x00><0x00><0x00><0x00>
2014-11-11 02:50:17 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2
2014-11-11 02:50:17 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=36,DIR_CNT=6,RF_CNT=56,RFPORT_ID=all
2014-11-11 03:03:17 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:T#302,97,6,33,3,26,10000000
2014-11-11 03:18:17 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:T#303,87,4,40,4,15,10000000
2014-11-11 03:19:18 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2<0x00>
2014-11-11 03:19:19 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=44,DIR_CNT=6,RF_CNT=69,RFPORT_ID=0<0x00>
2014-11-11 03:19:20 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2<0x00><0x00>
2014-11-11 03:19:21 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=44,DIR_CNT=6,RF_CNT=69,RFPORT_ID=0<0x00><0x00>
2014-11-11 03:19:22 CET: HB9FLL-3>APDI22,HB4FV-4*,WIDE2-1,qAS,HB9UQY:<IGATE,MSG_CNT=0,LOC_CNT=44,DIR_CNT=6,RF_CNT=69,RFPORT_ID=0
2014-11-11 03:19:23 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2<0x00><0x00><0x00>
2014-11-11 03:19:23 CET: HB9FLL-3>APDI22,HB4FV-4,HB9PM-4*,WIDE2-1,qAR,HB3YDW-3:<IGATE,MSG_CNT=0,LOC_CNT=44,DIR_CNT=6,RF_CNT=69,RFPORT_ID=0HB9FLL-3>APDI22,HB4FV-4,HB9BA-2*,WIDE2-1 [14/11/11 03:14:49] <UI>:
2014-11-11 03:19:24 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=44,DIR_CNT=6,RF_CNT=69,RFPORT_ID=0<0x00><0x00><0x00>
2014-11-11 03:19:25 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2<0x00><0x00><0x00><0x00>
2014-11-11 03:19:26 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=44,DIR_CNT=6,RF_CNT=69,RFPORT_ID=0<0x00><0x00><0x00><0x00>

I've tried to update some files from here, but somes errors appears, so I prefere to stay in 2.2.2 version for this moment ...

My AGWPE config file :

#################################################################
# #
# Configuration file for DIXPRS 2.2 APRS digipeater and gateway #
# #
# Lines starting with # ; ' are comments and not processed #
# #
# Empty lines allowed #
# #
# Parameter names are case insensitive #
# #
# Default file name is config.txt please rename samples #
# or use -c <configfile> command line option #
# #
# Home page: https://sites.google.com/site/dixprs/ #
# #
# (C) Bela Markus, HA5DI - 2012 #
# #
#################################################################

#################################################################
# #
# Sample configuration file for AGWPE/UZ7HO soundmodem, WINDOWS #
# #
#################################################################

#################################################################
# #
# <y/n> - use y or 1 to enable, n or 0 to diesable #
# <str> - ASCII text, case sensitive #
# <call> - callsign with optional SSID, case insensitive #
# <fv> - floating point value with decimal point #
# <n> - integer number #
# <xy> - two-letters string, case sensitive #
# <host> - domain name or IP address #
# <adrlst> - comma separated list of host IP and port addresses #
# in ip:port format, e.g. 127.0.0.1:8889 #
# #
# Command names and y/n parameters are case insensitive #
# #
#################################################################

#################################################################
# #
# General station setting; mandatory section #
# #
#################################################################

[GENERAL]

# Mandatory parameters

# Your callsign with SSID
CALLSIGN=HB9FLL-3

# Degrees; West is negative, East is positive
LONGITUDE=6.299197000000049

# Degrees; South is negative, North is posittive
LATITUDE=46.3048689

# Optional parameters

# Station height abvove the see level in meters; no default
ASL=460

# Owner name and contact; no default
OWNER=Jeremie

# Spool directory to import packets; no default
#SPOOL=<path>

# Station symbol; default is S#
#SYMBOL=<xy>

# UDP port base number; default is 31110
#UDPBASE=<n>

# Beacon frequency in minutes; default is 30
#BCNTIME=<n>

# Beacon text; %v replaced with actual version string; default is %v
# Used as default for ISGW and RADIO
#BCNTXT=<str>

# Select km/mi on monitor and in DX list; default is y (km)
#METRIC=<y/n>

# Max number of digis passed for local stations
# Used as message gating condition for gating to Rf
# Default value is 2
#LOCALHOPS=<n>

# Range in km within messages gated to Rf
# If defined, checked after hop count (local) check
# No default
#MSGRANGE=<fv>

#################################################################
# #
# IS gateway settings; remove this section to disable GW #
# #
#################################################################

[ISGW]

# Mandatory parameters

# Domain name of IS server to connect
host=rotate.aprs2.net

# Optional parameters

# Port number; default is 14580
#PORT=<n>

# Filter; default is r/@/150
# @ is replaced with station position
#FILTER=<str>

#################################################################
# #
# WRB server settings; remove this section to disable it #
# #
#################################################################

[WEBSERVER]

# Mandatory parameters

# WEB server port, no default
port=9999

#################################################################
# #
# Radio port configuration settings; repeat section for #
# multiple ports #
# #
#################################################################

[RADIO]

# Mandatory parameters

# Interface type
INTERFACE=AGWPE

# AGWPE host name
HOST=localhost

# AGWPE port
PORT=8000

# AGWPE channel
CHANNEL=0

# Optional parameters

# Modem speed, default is 1200
#SIGNALRATE=1200

# Enable/disable NWS WX bulletin and object gating from IS to Rf
# Disabled by default
#GATENWS=<y/n>

# Enable/disable BOM WX bulletin and object gating from IS to Rf
# Disabled by default
#GATEBOM=<y/n>

# Descripton of port; no default
#DESCRIPTION=<str>

# Via used to send locally generated packets; default is WIDE1-1,WIDE2-2
#AXVIA=<lst>

# Digipeaters processed with WIDEn-n algorithm; default is WIDE1,WIDE2
#WIDEN=<lst>

# Blacklisted stations; they are not digipeated, not gated; default is NOCALL,N0CALL
#BLACKLIST=<lst>

# PHG string, do not mix with range; no default
PHG=2160

# Range value in miles, do not mix with PHG; no default
#RNG=<n>

# Enable/disable transmission; change it to PTTON=1 to enable trasmission; default is no
PTTON=y

# Gate locally generated frames to IS gateway; default is no
# Useful for rx-only radio ports
# Experimental, use carefully
#GATELOCAL=<y/n>

# Gate digipeated frames to IS gateway; default is no
# Experimental, use carefully
#GATEDIGI=<y/n>

# Beacon text; %v replaced with actual version string; default is %v
#BCNTXT=Raspberry Pi B+ Direwolf / DIXPRS v2.2.2

# Enable/disable digipeater; default is enabled
#DIGIPEATER=<y/n>

# Below these are the traffic shaping settings for gating messages
# From IS to Rf
#
# For advanced users only; do not change if you do not know how
# traffic shaping works and if you do not have good reason !!!

# Traffic shaping high treshold, default is 0.75
#TRAFFICHIGH=<fv>

# Traffic shaping low treshold, default is 0.5
#TRAFFIClow=<fv>

# Traffic shaping transmission delay, default is 5.0 sec
#TRAFFICDELAY=<fv>

# Comma separated list of addresses to send receveid/transmitted frames
# in hostip:port format. No default.
#UDPCC=<adrlst>

Bela Markus

unread,

Nov 11, 2014, 9:08:40 AM11/11/14

to dix...@googlegroups.com

Hi Jérémie

duplicated packets are not identical, there is a 0x00 character at the end in one packet, while the other do not have it or different number of 0xx chars. I will check the code later but DIXPRS itself do not add 0x00 to the end.

Regards... Béla, HA5DI

--
Azért kapta ezt az üzenetet, mert feliratkozott a Google Csoportok „dixprs” csoportjára.
Az erről a csoportról és az ahhoz kapcsolódó e-mailekről való leiratkozáshoz küldjön egy e-amailt a(z) dixprs+un...@googlegroups.com címre.
További lehetőségekért látogasson el ide: https://groups.google.com/d/optout.

Bela Markus

unread,

Nov 11, 2014, 9:40:47 AM11/11/14

to dix...@googlegroups.com

Hi

looking around it looks like HB9FLL-3 is adding it:

2014-11-11 08:59:12 CET: HB4FV-4>APOT21,WIDE2-1,qAR,HB9FLL-3:!4642.16NV00624.63E#12.4V 27C AFTT-VD: Swiss army signals troops2014-11-11 09:09:40 CET: HB4FV-4>APOT21,WIDE2-1,qAR,HB9AVQ-10:!4642.16NV00624.63E#12.5V 26C AFTT-VD: Swiss army signals troops2014-11-11 09:20:19 CET: HB4FV-4>APOT21,WIDE2-1,qAR,HB9AVQ-10:!4642.16NV00624.63E#12.9V 26C AFTT-VD: Swiss army signals troops2014-11-11 09:30:46 CET: HB4FV-4>APOT21,WIDE2-1,qAR,HB9AVQ-10:!4642.16NV00624.63E#12.5V 26C AFTT-VD: Swiss army signals troops2014-11-11 09:41:15 CET: HB4FV-4>APOT21,WIDE2-1,qAR,HB9AVQ-10:!4642.16NV00624.63E#10.7V 26C AFTT-VD: Swiss army signals troops2014-11-11 09:41:16 CET: HB4FV-4>APOT21,HB9FLL-3*,qAR,HB9FLL-3:!4642.16NV00624.63E#10.7V 26C AFTT-VD: Swiss army signals troops<0x00>2014-11-11 09:51:39 CET: HB4FV-4>APOT21,WIDE2-1,qAR,HB9AVQ-10:!4642.16NV00624.63E#12.9V 25C AFTT-VD: Swiss army signals troops2014-11-11 10:02:07 CET: HB4FV-4>APOT21,WIDE2-1,qAR,HB9AVQ-10:!4642.16NV00624.63E#12.6V 25C AFTT-VD: Swiss army signals troops
Béla, HA5DI

Jérémie

unread,

Nov 11, 2014, 9:50:50 AM11/11/14

to dix...@googlegroups.com

Hi Béla,

Thanks for your answer

I've tried to disable PTT (#PTT=y), and there is no more line on aprs.fi with <0x0>...

It's seems more "clear", but I think there is a problem with a file somewhere ...

Now some information with your call is sent ?

2014-11-11 15:36:56 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:>Connected to T2HUN count 1/0
2014-11-11 15:38:41 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:=4618.29NS00617.95E#PHG2160/A=001509DIXPRS 2.2.2
2014-11-11 15:38:41 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN:<IGATE,MSG_CNT=0,LOC_CNT=46,DIR_CNT=8,RF_CNT=59,RFPORT_ID=all
2014-11-11 15:41:24 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN::HA5DI-3  :No callsign provided
2014-11-11 15:41:35 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN::HA5DI-3  :DIXPRS 2.2.2 (05-09-2012) on Linux 3.12.32+ (armv6l), Python 2.7.3
2014-11-11 15:41:46 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN::HA5DI-3  :(1/3) IS T2HUN:14580 (r/46.3049/6.2992/150) 1/0
2014-11-11 15:41:46 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN::HA5DI-3  :(2/3) WEB 9999
2014-11-11 15:41:46 CET: HB9FLL-3>APDI22,TCPIP*,qAC,T2HUN::HA5DI-3  :(3/3) AIR0 (AGWPE) No description

<span class="raw_line" style="font-family: Verdana, Arial,
...

Bela Markus

unread,

Nov 11, 2014, 10:00:18 AM11/11/14

to dix...@googlegroups.com

Hi,

I checked settings at HB9FLL-3 using queries so it's OK to see my callsign there. I suspect it is a bug in the AGWPE (like) modem used by DIXPRS.

Regards... Béla, HA5DI

--

Jérémie

unread,

Nov 11, 2014, 10:07:15 AM11/11/14

to dix...@googlegroups.com

On other idea :

It's normal to see my call on RX stations heard on the webpage status ?

Heard direct in last hour:

F1ZYB-3 F5ZFL-4 HB4FV-4 HB9AR-4 HB9FLL-3 HB9HFD-13 HB9TOR-9 HB9VCT-9

...

Bela Markus

unread,

Nov 11, 2014, 10:11:14 AM11/11/14

to dix...@googlegroups.com

What is the URL to get this?

--

Jérémie

unread,

Nov 11, 2014, 10:12:53 AM11/11/14

to dix...@googlegroups.com, bma...@hasix.org

It's on my Dixprs status webpage http://192.168.1.124:9999/

2014-11-11 02:19:20 CET: <a moz-do-not-send="true" href="http://aprs.fi/?c=raw&limit=&call=HB9FLL-3" style="color:rgb(0,0,255);outline-style:none" target="_blank" onmousedown="this.href='http://www.google.com/url?q\75http%3A%2F%2Faprs.fi%2F%3Fc%3Draw%26limit%3D%26call%3DHB9FLL-3\46sa\75D\46sntz\0751\46usg\75AFQjCNH75-JC4PBcR0OGbXAwMA0LfpY1PQ';return
...

Jérémie

unread,

Nov 11, 2014, 10:32:44 AM11/11/14

to dix...@googlegroups.com, bma...@hasix.org

Maybe I found where's the problem ...

I start Dixprs with PTT on (PTT=y), but with cable connected on the usb soundcard (no mic, no speaker).

Probably the USB Soundcard quality is bad, and maybe there is a noise signal during transmit in return (like a normal reception)

I'll check this, and try another soundcard to be sure

Jérémie

unread,

Nov 11, 2014, 4:18:59 PM11/11/14

to dix...@googlegroups.com, bma...@hasix.org

Some news :

After many tries why my usb soundcard + digivox, and now with my signalink : same problem

I've tried the two solutions with my FT817 and IC706 : same problem

I've tried with Direwolf and Xastir, and no problem on transmit and receive, my data is clear (with signalink, or USBcard + digivox, and FT817 and 706)

I think there is a "loop" between Dixprs and Direwolf, to transmit on RF some information, I don't know why, and how is possible.

I've check again and again during last 3 days, configuration of Dixprs and Direwolf on my Raspberry. I didn't find any problem ... but he's there ...