Example MQTT projects for STM32F7

[Freddie Chopin]

Hello!

A few days ago I’ve uploaded a new repository with an example project
for STM32F7 chip family. STM32F7-ETH-LAN8720A-lwIP-MQTT is a very
simple MQTT demo application which connects to the broker via Ethernet
link. This project is targeted for 32F746GDISCOVERY (also known as
STM32F746G-DISCO) and NUCLEO-F767ZI boards. Both of the boards feature
a Microchip LAN8720A PHY, but you can easily adapt the project to any
board which has the same (or compatible) PHY. The application itself is
very simple – it reports to the MQTT broker when the state of board’s
button changes and allows you to remotely control the state of board’s
LED(s). Main purpose of this project is to demonstrate how to integrate
distortos with external libraries, in this case lwIP TCP/IP stack and
ST’s STM32F7 HAL library (used in the driver for Ethernet interface).

Actually a few months ago I’ve also published a very similar project,
but using a different method to connect to the MQTT broker. STM32F7-
USB-host-ME906-lwIP-MQTT – as hinted by the name – uses Huawei ME906
4G/LTE USB modem instead of Ethernet. This modem is also available as
HP LT4112 Gobi – it’s exactly the same hardware, but with different
VID/PID pair. The application supports both of them. In addition to the
two libraries mentioned earlier, this project also integrates ST’s USB
host library. Similarly to the previously mentioned one, this project
is configured for the same two boards and the MQTT application is
identical.

Article on project's website:
http://distortos.org/news/example-mqtt-projects-stm32f7/

Regards,
FCh