Download Dse Configuration Suite Software Installer
Edel Dieringer
Select Ok to apply your settings and close the dialog box. Select Cancel to cancel your changes and close the dialog. The Save As and Open buttons allow you to save your settings for reuse later. Select Save As to save your current settings into a configuration file on your computer. Select Open to restore your settings from a configuration file.
Components for a generic installation are available for downloading in the table above. This is a known installation and configuration path for this release. Please see the Oracle Fusion Middleware Download, Installation, and Configuration Readme Files and the Installing and Configuring Oracle SOA Suite and Oracle Business Process Management guide for assistance in creating alternative installation scenarios.
By disabling this option, you will make sure that your bundle installer will never appear in the Control Panel list of installed applications. There, you will only see the real applications that the bundle will install, each with its separate entry. Let's see how you add those applications in the project.
Since your suite installation will install three different applications, you might want to let the user select which application to install. This is an optional step and you may skip if you want your users to always install all available applications.
Also, we capture the port number for the second application and pass that through the command line too. As seen in the image, all the parameters required by the actual installers are passed in their command lines. There is no other way to pass information from the suite installation to the independent installer packages.
To make your suite installation as a single package, you must go to the Build page and set the package type to Single EXE setup(resources inside), this will make Advanced Installer generate a single EXE as an output that your users can download.
Another important configuration you need to enable is the option Run as administrator from the Install Parameters page. This option is important as it will ensure your applications inherit the elevated credentials from the bundle installer, so they can install accordingly. Disabling this option may lead to failed installations.
Define each feature of your suite installation here. Each defined feature will be associated with a single setup that will be merged into the master installation. Each feature will be visible for selection by end-users at runtime. You will use the wizard to define all of the details for each merged setup belonging to each merged feature. You may revisit this page to change defined features at any point in using the wizard.
If the installer for the technology prerequisite is not self-contained inside a single file, but requires multiple files (and folders) for installation, check this box. This is typically the case when using an administrative installation point for an MSI installer, or when an EXE installer has been extracted to a temporary folder. All files and subfolders of the folder containing the selected setup being merged will be included in the suite installer.
If you are able to create an administrative installation point for an MSI, or extract the contents of an EXE installer, it is recommended that you do so. This will ensure you will enjoy substantially improved compression savings, above and over the already compressed size of the original setup you are merging, when building your suite installer.
For MSI installers, type any Windows Installer parameters to use for installation. A typical parameter is ADDLOCAL=ALL, which installs all features contained inside the MSI on target PCs. The native progress feedback of the MSI installer will be captured automatically by your suite installation, and displayed as a native, integral part of your suite installer's installation progress window. You may also include one or more transform files to be applied to the MSI setup during setup. To add transforms, first ensure they are in the same folder as the MSI file being installed, and the Include the entire folder option on the previous page is checked. Then, just select one or more MST files to apply in the Transforms field on this page. Each selected transform will be applied as the MSI is being installed. You may also use InstallAware Transformer to create your own MST files, capturing MSI properties, directories, and features during the installation interview.
For EXE installers, type any command line parameters to use for installation. To ensure the best possible end-user experience, ensure to specify parameters for a silent installation without a reboot at the end of an installation. A non-silent installation will disrupt your end-user experience by displaying additional windows during installation beyond that of your own setup project dialogs. A reboot at the end of the merged setup installation will also disrupt your end-user experience by restarting target PCs before your suite installation is complete, and will require end-users to manually re-start your suite installation after the target PC has finished rebooting. Typical command line parameters are included in the drop-down menu accompanying this field, but you must always contact the manufacturer of the setup you are merging to ensure you have obtained the correct command line parameters for their installation package. While the native progress feedback of an EXE installer will not be captured, your suite installer will automatically switch to marquee progress mode in your suite installer's installation progress window, and revert back to a percentage based installation progress after your merged setup has finished installing.
Please note that any newer operating systems will not be checked for any service pack levels. You may edit the created suite installer feature installation MSIcode script after completing the wizard to enforce service pack requirements for any newer operating systems.
Ensure to select each nested dependency explicitly, as nested runtimes will not be automatically added to your suite installer feature when they are selected, unless each dependency is explicitly marked on this page.
Administrators can grant users permissions to download and install the add-ins directly from eCounsel or Secretariat. Before these users can download the installers, the installers and documentation must be placed in a location accessible to the users.
If users are allowed to install the add-ins from the Tools Preferences page in eCounsel or Secretariat, the installers and documentation must be placed in a location that the users can access. The installers and documentation are available from the DVD folder in the installation media.
If users are allowed to install the add-ins from the Tools Preferences page in eCounsel or Secretariat, the installers must be placed in a location that the users can access. The installers are available from the DVD folder in the installation media or from the Suite 8.11.0 Service Pack 13 Release Notes.
Note: The instructions for making the installer available to users are for on-premise installations only. If you have an installation of Suite that is hosted by Mitratech, contact Mitratech support.
Before a user can download and install the add-ins through eCounsel or Secretariat, the administrator must grant the user permission in Suite Manager. Otherwise, a system administrator needs to retrieve the installers from the installation media and distribute or install on individual client machines.
In order to make an add-in available for other accounts on the same machine, run the installer for each user account and select the Repair option. The Repair installation must be run for each add-in. If the OfficeSettings.ini from the default directory path contains a valid login URL, the add-ins will be available without any error. If it does not have the login URL information, ignore the exceptions until the system requests the credentials and saves the valid login URL in OfficeSettings.ini from User directory path.
Note that as of the 2021.2 release, Alteryx Intelligence Suite is not included in the Alteryx Designer installer. You need to install Intelligence Suite separately. To download the installer, visit the Licensing and Downloads portal.
The nginx-manager binary will look in the binary file location first for a configuration file, then use the /etc/nginx-manager/nginx-manager.conf file. Command-line options also override these. The order of precedence from highest to lowest is:
If you need to perform asynchronous operations before any of your suites are run (e.g. for dynamically generating tests), you may delay the root suite. Run mocha with the --delay flag. This will attach a special callback function, run(), to the global context:
You cannot use it.only, describe.only, this.only(), etc., in parallel mode. This is for the same reason as the incompatible reporters noted above: in parallel mode, Mocha does not load all files and suites into memory before running tests.
Some types of tests are not so well-suited to run in parallel. For example, extremely timing-sensitive tests, or tests which make I/O requests to a limited pool of resources (such as opening ports, or automating browser windows, hitting a test DB, or remote server, etc.).
The Markdown reporter generates a markdown TOC and body for your test suite. This is great if you want to use the tests as documentation within a Github wiki page, or a markdown file in the repository that Github can render. For example, here is the Connect test output.
Options which can safely be repeated (e.g., --require) will be concatenated, with higher-priorty configuration sources appearing earlier in the list. For example, a .mocharc.json containing "require": "bar", coupled with execution of mocha --require foo, would cause Mocha to require foo, then bar, in that order.
08ab062aa8