philodyl flatters behaved

0 views

Skip to first unread message

Ozie Melzer

unread,

Aug 2, 2024, 3:51:42 AM8/2/24

to diphocitli

Hi, I've got a google nest mini and I've just connected my TV to it. I've been able to turn on netflix through my nest, but when I tell it to play a tv show on netflix, it says "I also need to know which device to use. Try saying that again, and include the device's name." Does anyone have any ideas on how to fix this issue? Would appreciate any suggestions!

You could try setting your "Preferred TV" to your TV via the Google Home app. That is supposed to work, though I think this feature is a little buggy. (I'm currently having a different problem, but related to the same feature).

After linking, you can start playing a TV show or movie with voice commands like "Ok Google, watch Orange is the New Black on TV," all of your next control commands (pause, next, etc.) control that particular TV. You don't need to continue to specify the TV after the viewing session begins.

Hi guys. The Microsoft Edge is my favorite browser of all times, really, but not when I try to watch netflix or other video streaming services, it always breaks, I have no ideia what to do anymore. Always when I try to play something there's an error and then I need to reload over and over again, sometimes even when I just play the video it stop working when I try to play again. Help me to keep using this best browser that I've ever seen.

I've ever tried to disable hardware acceleration, enable DRM content, install Microsoft Silverlight and a lot of other things, but I didn't get to watch so far without an error I keep receiving these error codes: D7356-7701 and others related. Is there's still something that can be done to really fix theses erros or I just have to be patient and wait for news versions of the browser?

OK, hope you guys can help. I just hooked up my new Orbi and everything is runnuning great except Netflix. I try ro access Netflix via Dish Network. I have my Orbi connected to ATT Router/Modem 5268AC. Whe I check my internet connection on my Hopper it checks out fine. all green connected to Orbi with 100% Signal. But when I try to run Netflix it says the Netflix won't connect. I check the Netflix network settings and all netflix servers have a red x. I'm not sure what the issue is or how to resolve it should be working fine? It's like Netflix wont connect to the internet.

Modem Combo Units:
Couple of options,
1. Configure the modem for transparent bridge mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router.

Be sure that the Orbi and ATT modem are not using same IP address of 192.168.1.1. If you walk thru the setup wizard on the Orbi it should help with this if your going to use the modem in router mode. Review the options...

Hi There - I just set up a AC1900 Wireless MU-MIMO Gigabit Router Archer A9 (which for some reason isnt an option from the model list up there) and it is lovely - my phone, tablet, computer, google home devices are all working great. However, netflix on my TCL smart TV won't work. The TV itself is connected and other channels (such as amazon prime) work. Netflix keeps giving me error codes tvq-st-103 and tvq-st-131, saying it can't connect to the network. I can watch netflix on my other devices. I've tried the obvious things like restarting the network by unplugging everything and then plugging back in one at a time, resetting the netflix login, returning the TV to factory settings... It's gotta be something with the router but I can't figure out what. Anyone here have any smart ideas?

You can try to factory default the router by holding the reset for 15 seconds. When the router is back up connect to the default Wi-Fi and test the connection. By default the router can not block specific traffic, but there might have been something adjusted which defaulting will clear out.

If the issue still happens it would be best to contact Netflix to see if there are any settings to adjust or to try since streaming services work with the router from other companies as other devices.

There could be regional differences affecting your connection. We recommend creating a thread on our global community. community.tp-link.com/en. This community, community.tp-link.com/us is only able to assist customers in the U.S. While issues may seem to be the same issue and in somecases they are its always best to interact with the team best able to handle your particular concerns.

Because i am also a consumer i do get annoyed when companies say this but in this case the first thing to do is reach out to the manufacture of the TV and troubleshoot their device first. This is because since its the only device having issues the troubleshooting would want to begin at the client and not the router. If more devices were having the same issue then it would be one thing but with just one experiancing this issue that is where you would want to start.