DigiTemp 3.6.0 crashing on Ubuntu 14.04

[Dane Allison]

Hi All

I am hoping someone can assist me in debugging some issues I am having with digitemp.

In the example below I have a DS9490R USB 1-wire adapter connected to a single DS18B20+PAR in parasitic mode. I have also tested with 2 DS18B20+ in powered mode with the same results.

Walking the network finds the DS18B20 device however when I run a -i it halts at "Searching the 1-Wire LAN"

Note that "linuxbox" is a ubuntu 14.04 vm running under virtualbox on a Ubuntu 13.10 host.

Also note I have created a symlink from digitemp_DS2490 to digitemp

lrwxrwxrwx  1 root root         15 Jan  5 19:26 digitemp -> digitemp_DS2490


Welcome to Ubuntu 14.04 LTS (GNU/Linux 3.13.0-30-generic x86_64)


user@linuxbox:/usr/bin$ sudo digitemp -w
DigiTemp v3.6.0 Copyright 1996-2007 by Brian C. Lane
GNU General Public License v2.0 - http://www.digitemp.com
Found DS2490 device #1 at 001/003
Turning off all DS2409 Couplers
.
Devices on the Main LAN
28F2FB7E0500005C : DS18B20 Temperature Sensor
8149E0350000005A : Unknown Family Code

user@linuxbox:/usr/bin$



user@linuxbox:/usr/bin$ sudo digitemp -i
DigiTemp v3.6.0 Copyright 1996-2007 by Brian C. Lane
GNU General Public License v2.0 - http://www.digitemp.com
Found DS2490 device #1 at 001/003
Turning off all DS2409 Couplers
.
Searching the 1-Wire LAN
user@linuxbox:/usr/bin$


I have tested the wiring and sensor(s) on my router running a second DS9490R + digitemp optware package and it works so I don't think this is a wiring issue.


Any advice appreciated.

Thanks

[Dane Allison]

Hi All

I managed to solve this by building 3.7.1 pulled from gitbub.

I am now fighting udev permissions as i can currently only run digitemp as root..

3.7.1 clearly solves some issues with the DS9490R USB device. Thanks for the release.