Tone

[J R]

Thank you for all the hard work.  

I haven't made a QSO yet, but I have heard some conversations.  It maybe my set-up, or just the mysterious nature of HF, as I have made

a QSO in South Africa, but not to one part of Arizona where a friend lives, or course.

I have installed 2.3, and when I transmit, it is tone.  I have used a websdr to check this.  Tone is around ~800hz.

Any ideas? 

Thank you.

Jason Reilley

W0LUV

73

[Walter Holmes]

Jason,

 

If your listening from a WebSDR receiver, you are correct, in that you will only heard a loud tone or buzzing type noise.

Unless the WebSDR receiver has added the FreeDV option, which several are doing these days.

 

Watch this webpage as your transmitting, to see if your being received by others. qso.freedv.org  

 

Hope to work you soon.

 

Walter/K5WH

--
You received this message because you are subscribed to the Google Groups "digitalvoice" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digitalvoice...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/1f68bd45-ff99-47c5-90b3-6428d754001fn%40googlegroups.com.

[Jason]

Walter,

Thank you for the clarification.  It just doesn't sound digital, not that I am an expert, but it sounds solid, as opposed to other digital modes.

W0LUV

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/007001dce192%248b5d13c0%24a2173b40%24%40k5wh.net.

--

Warmly,
Jason

This e-mail may contain material that is confidential or private and intended for the sole use of the intended recipient. Any review, reliance, or distribution by others or forwarding without the express permission of the original sender is strictly prohibited and violates constitutionally protected privacy rights. If you are not the intended recipient, please contact the sender and destroy all copies.

[Walter Holmes]

20m looks like a flat line today, so conditions have been really terrible for making contacts on Freedv.

 

But the fact that your decoding stations sure sounds like your all set to go.

 

We just need a little help from mother nature on the propagation. 😊

 

 

Walter/K5WH

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAL_gj8%2BUWwP1%3Dvx3A_TiNzJEqhCaMQ1_CtNUJfXvC6j4t4RSwg%40mail.gmail.com.

[Rick, W4XA]

Jason, 

It's a common problem with Win11.   It's playing back through your speaker via an audio routing path in Windows.

I am having the same problem.   I just haven't found the Windows audio routing solution yet