Flex Integration Configuration

[K9YK Radio]

Now that I've got the flex waveform integration running on ubuntu, where do I find the configuration settings file so that I can adjust settings, particularly around reporting?  

Mark (K9YK)

[Mooneer Salem]

Hi Mark,

There's currently no configuration available; callsign comes from the radio's configuration and grid square comes from its GPS (if equipped). What are you interested in changing? 

Thanks, 

-Mooneer K6AQ 

On Sat, Dec 27, 2025, 4:40 PM K9YK Radio <k9yk...@gmail.com> wrote:

Now that I've got the flex waveform integration running on ubuntu, where do I find the configuration settings file so that I can adjust settings, particularly around reporting?  

Mark (K9YK)

--
You received this message because you are subscribed to the Google Groups "digitalvoice" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digitalvoice...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/31809a71-0db7-4aa4-8a94-eddb13e8f948n%40googlegroups.com.

[K9YK Radio]

It would be nice to set some of the reporting parameters.  Things like:

1. Enable/disable freedv reporting
2. Locator
3. Message

Mark (K9YK)

[Mooneer Salem]

Hi Mark,

This is possible to implement with the AppImage but I'm not sure if it would be once it's able to run on the radio itself. I'll have to do more research on this.

Thanks,

-Mooneer K6AQ

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/1a90c24c-d8e0-46e8-86da-7e3e331427ean%40googlegroups.com.

[Michael Walker]

Hi Mooner

Maybe, just to be simple, these values could be set in a static file and check upon occasion.  This would allow the user to change the feature even why the image is running.  

Or passed as variables during startup

Mike Va3mw

On Dec 28, 2025, at 1:31 PM, Mooneer Salem <moo...@gmail.com> wrote:



To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/CAAzDfxMmj8Jjur4Y85P3b78a9mzfPwLfJr8%3De5O82AWkj_xHsg%40mail.gmail.com.

[Mooneer Salem]

Hi all,

There's some initial work at enabling command-line options for the requested enhancements in https://github.com/drowe67/freedv-gui/pull/1154 ("ms-flex-cmd-options" branch). Unfortunately I'm currently traveling so I can't test locally yet, but let me know if you run into problems and I can investigate further.

Thanks,

-Mooneer K6AQ

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/381C7AEE-8C26-4280-AFF9-405F86BEBDE4%40portcredit.net.

[K9YK Radio]

Mooneer, you could use the message command in the Flex API to send commands/instructions/settings from an external application to the freedv waveform AppImage.  Don't know if this would also work for the waveform runnning inside the radio?

Something like this:
    c0|message severity=info code=0xFD0001 "<freedv><rptsetting>'locator':'EN60ik'</rptsetting></freedv>"
is received on other clients like this:
    M10FD0001|<freedv><rptsetting>'locator':'EN60ik'</rptsetting></freedv>

Mark (K9YK)

[Mooneer Salem]

Hi Mark,

Thanks for letting me know about the message command. Ideally it would be something that could be sent via the SmartSDR application rather than anything external, so I may still need to check with Flex on that. Failing that, this is a good workaround (especially if something like NodeRed can send the needed command).

Thanks,

-Mooneer K6AQ

To view this discussion visit https://groups.google.com/d/msgid/digitalvoice/8e18ca43-3939-4777-98b1-9ad480269143n%40googlegroups.com.