- Freedv 1.7 Build - 4 Updates
- Experimental FreeDV 1.8.0 builds now available - 4 Updates
JH0PCF kanda <hirk...@gmail.com>: Mar 23 04:24AM -0700
Thank you for your constant support.
On Ubuntu https://github.com/drowe67/freedv-gui
I tried to build FreeDV GUI by following the written procedure
Build on Ubuntu Linux (16-20) using PulseAudio.
./build_linux.sh: Line 30: cmake: Command not found
+ cd / home / XXXX / freedv-gui
+'[''!' -D LPCNet']'
+ cd / home / XXXX / freedv-gui / LPCNet
+ git checkout master
Already on'master'
Your branch is up to date with'origin / master'.
+ git pull
Already up to date.
+ mkdir -p build_linux
+ cd build_linux
+ rm -Rf'*'
+ cmake -DCODEC2_BUILD_DIR = / home / XXXX freedv-gui / codec2 /
build_linux ..
./build_linux.sh: Line 39: cmake: Command not found
And cannot be built.
Was there any change?
Jim Tittsler <jtit...@gmail.com>: Mar 23 09:30PM +0900
> + cmake -DCODEC2_BUILD_DIR = / home / XXXX freedv-gui / codec2 / build_linux ..
> ./build_linux.sh: Line 39: cmake: Command not found
It looks like you may not have the `cmake` build tool installed on
that machine. Please try:
sudo apt update && sudo apt install cmake
and then try again.
Jim 7J1AJH
Mooneer Salem <moo...@gmail.com>: Mar 23 07:54AM -0700
To add to this, it's possible that there are other required packages that
aren't installed as well, so you should run the following command from
README.md to make sure you get all of them:
sudo apt install libspeexdsp-dev libsamplerate0-dev sox
git libwxgtk3.0-gtk3-dev libhamlib-dev libasound2-dev libao-dev libgsm1-dev
libsndfile-dev cmake module-assistant build-essential libpulse-dev
-Mooneer K6AQ
JH0PCF kanda <hirk...@gmail.com>: Mar 23 02:01PM -0700
Thank you for your support
README.md procedure on the terminal again
sudo apt install libspeexdsp-dev libsamplerate0-dev sox git
libwxgtk3.0-gtk3-dev libhamlib-dev libasound2-dev libao-dev libgsm1-dev
libsndfile-dev cmake module-assistant build-essential libpulse-dev
And when I build it, I can build it.
I was able to run it in ./build_linux/src/freedv
However, for the FreeDV 1.8.0 deb file released the other day, install the
package lpcnet lpcnet_toos codec2 released on the Ubuntu terminal first
using the dpkg -i command.
With apt-get install ./freedv_1.8.0_amd64.deb
It can be installed without error. The FreeDV icon appears, but it cannot
be executed even if it is clicked.
Is it the difference between debian and Ubuntu dependent packages?
Mooneer Salem <moo...@gmail.com>: Mar 22 11:59PM -0700
Hi Kanda,
Just to make sure I fully understand, are you saying that the installer
doesn't work when you double-click on it? Or is there something else
happening?
Also, re: Linux packages, you should be able to install them on a recent
Debian or Ubuntu machine by running something similar to the following
(after downloading all of the packages and placing them in the same folder):
apt-get install ./freedv_1.8.0_amd64.deb
Thanks,
-Mooneer K6AQ
Mooneer Salem <moo...@gmail.com>: Mar 23 12:53AM -0700
BTW, I have a new build that fixes a voice keyer bug that crept in with the
last build up at
https://www.dropbox.com/sh/ag9eyap0j2zj56v/AACWEGmw1uQWVojSJlnCDZAfa?dl=0.
:)
-Mooneer K6AQ
JH0PCF kanda <hirk...@gmail.com>: Mar 23 04:19AM -0700
Thank you for your constant support.
On Ubuntu https://github.com/drowe67/freedv-gui
I tried to build FreeDV GUI by following the written procedure
Build on Ubuntu Linux (16-20) using PulseAudio.
./build_linux.sh: Line 30: cmake: Command not found
+ cd / home / hiroyuki / freedv-gui
+'[''!' -D LPCNet']'
+ cd / home / hiroyuki / freedv-gui / LPCNet
+ git checkout master
Already on'master'
Your branch is up to date with'origin / master'.
+ git pull
Already up to date.
+ mkdir -p build_linux
+ cd build_linux
+ rm -Rf'*'
+ cmake -DCODEC2_BUILD_DIR = / home / hiroyuki / freedv-gui / codec2 /
build_linux ..
./build_linux.sh: Line 39: cmake: Command not found
And cannot be built.
Was there any change?
Mooneer Salem <moo...@gmail.com>: Mar 23 07:56AM -0700
Hi Kanda,
As mentioned in the 1.7 email thread, the cmake application (and possibly
the other required packages) aren't installed, so the apt command from
README.md should be executed:
sudo apt install libspeexdsp-dev libsamplerate0-dev sox
git libwxgtk3.0-gtk3-dev libhamlib-dev libasound2-dev libao-dev libgsm1-dev
libsndfile-dev cmake module-assistant build-essential libpulse-dev
Hope that helps! Let me know if you continue to have issues after running
the above.
Thanks,
-Mooneer K6AQ
You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page.
To unsubscribe from this group and stop receiving emails from it send an email to digitalvoice...@googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "digitalvoice" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digitalvoice...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/digitalvoice/CAMXZ1MBr_A_FZQCr%2B7yspxNfdKORz8t_Vx5N4Xtz6byzFh0iuw%40mail.gmail.com.