digitalvoice

My experience with the waveform (RSPi 4+) so far: Switching AGC from „mid“ to „slow“ produces a

Howdy all, I have been trying to get FreeDV to control my IC-M802 via a USB--> Serial cable

THANKS Mooneer, That was it. All is behaving as it should now. Cheers Daryl VK3AWA (KO6LQQ) Sent from

Hi Mark, Thanks for letting me know about the message command. Ideally it would be something that

Hi Clancy, Unfortunately this is going to require the Hamlib project to add support first, as

Below is the list of stations that participated in the FreeDV 40M Tuesday Night Activity Net that met

Yes, great conditions for long path to VK land. VK2JAS signal peaked to 11dB SNR here and my tower/

Hi Moneer, thanks for the test version 2.2.0. It has the exact same problem. I reinstalled version

WebSDR back online with RADEv1 decode! An Xeon from 2014 in a SFF Dell T1700. Alan VK2ZIW On Mon, Dec

Oops, I missed that part, sorry. Are you able to open up pavucontrol and confirm that FreeDV is using

Hi Mark, I took a look at your screenshots again and I just want to confirm, you're trying to use

Thanks Mooneer! That did the trick, it's running now! Yes, the readme on github at: freedv-gui/

Thank you for your continued support. This is JH0PCF Kanda. Thanks to you, the number of amateur

Hi Fred, Due to the WebSDR in Sydney Australia not having enough CPU power to decode RADE, I've

Hi Bob, Do you have any settings enabled on your router to shut down inactive connections? If so, try

Thanks Mooneer all is OK. I hadn't realized this. On Tuesday, December 23, 2025 at 3:56:44 PM UTC

Thank you very much for your work on FreeDV and Merry Christmas! George Migliarini AC6RB

Hi Mike, Theoretically there should be enough CPU available to run two copies of the AppImage (with

And I see my problem, the i5-2400 does not have avx2, required by RADE. I must have missed the test

thanks to Walter K5WH for the new version my friends install now works ok and thanks to everyone else

Please try the WebSDR here, Sydney Australia to decode RADEv1 USB & LSB: shed.nepeanshed.org.au:

20m and 40m seem to dominate the band choice for FreeDV according to FreeDV reporter data. 10m is

Trivia! Older rigs that do not have USB on 160/80/40 etc....(or do not have selectable sideband) (

Good that apparently I don't need one as everything is fine if I go through a 4-port USB hub. 73

Well, I've "hacked" OpenWebRX to decode RADEv1 both USB and LSB. Please try it. note

Thanks for that explanation Mooneer. It does actually work but I have to manually set the sampling

FYI in case anyone starts suddenly having audio problems in FreeDV. -Mooneer K6AQ ----------

PROBLEM SOLVED!!!!! Dayne, K8CHY, said that he had experienced this problem with his IC7300 and it

Thanks Mooneer! I have never tried that and never thought of it! I am assuming it's not a default

An Addendum Just tried pairing a JBL Charge-3 Bluetooth speaker to the 2015 Macbook Pro running MacOS