Newbee AT-578uvII > DigiRig >>DigiPi

[Jerry N4KJ]

Sorry for the basic question, but I would like some help getting DigiPI to PTT my AT578vIII in CAT mode.

So using DigiPI version1.9-4 connected to a DigiRig mobile and connected to the microphone jack's RJ45 through the non-coiled DigiRig-supplied (CAT) cable for the AT578.

The HAND-Type in the AT578 is set to Uart-Det.

I do see that the DigiPI decoding signals, so believe audio (at least receive) is working.

Where am I going wrong? How does either the DigiPI or DigiRig know what radio I'm using to generate the proper CAT signals?  

Kinda lost here. THANKS!

[Craig]

DigiRig should pull the PTT wire to ground when commanded to transmit by DigiPi (RTS signal goes high on the serial port).

If DigiRig guys have a cable for that rig, you should be in business, and shouldn't have to know that?

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/5826a892-60ad-4f4b-9dfb-4d84d5c7c2b5n%40googlegroups.com.