Digipi 2.3 Beta 2 Summary

26 views
Skip to first unread message

Felipe Guilfuchi Ramos

unread,
Nov 4, 2026, 9:37:13 PMNov 4
to DigiPi
I downloaded this latest version of Digipi and am quite pleased as all switches / services and programs work (no more red failure indicators).
The Mercury app is quite stunning! It's the first time I can see it as it did not open in previous versions.
Here is a run down of all hf modes I am checking for compatibility with my setup which consists of a Raspberry Pi 3B+, a DRA-45 sound interface, usb cat cable and a ICOM IC-706MKIIG transceiver. I know that the DRA-45 was not supposed to be compatible with Digipi but it's what I have and it looks like some progress has been made as it appears to work with some modes!
I will be using this Digipi for HF modes only. I will use a separate one for vhf / uhf packet and FM-XARA modes.

JS8 Call - Audio and PTT not configurable
FLDIGI - Audio and PTT configurable (CM-108 sound and PTT) available).
SSTV - Audio configurable but PTT not.
WSJTX - Audio and PTT not configurable
Modem 73 - Audio and PTT configurable (CM-108 sound and PTT available).
Mercury - Audio and PTT configurable (CM-108 sound and PTT available).
Ardop - Audio and PTT configurable (CM-108 sound and PTT available).
XARA - audio and PTT work but can not configure CAT for frequency control.

I still have not transmitted with any of these modes until I can configure everything properly and learn how to use them.

I should note that some of these settings could be available for change, it's just that there is a lack of setup information in one place so their could be errors of my part.
If there is someone out there with pointers or information on getting all these programs up and running with a correct configuration, please don't hesitate in posting them here.

Felipe Guilfuchi Ramos
WP4DMD
Caguas, Puerto Rico.
Reply all
Reply to author
Forward
0 new messages