IC705 not decoding aprs

[Cliff Barrimore]

Hi all

may sound simple but I just cant get this mode to work on the 705, works fine on 9700.

so I can hear the packets being received, but the green rx just flickers, so no decodes.

works fine on all other modes that I have tried like ft8. 

changed levels in 705 connectors, changed it in the digpi sound level mixer, but nothing seems to make a difference?

any suggestions

thanks

Cliff

ZL1CTS

[Aaron Webb]

Hey!

I had this issue with my UV pro. Turns out the squelch was the issue for me. Might wanna turn the volume all the way down and open the squelch. Might help?!

73

Aaron

KB9MTD 

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/c218f3ae-87c7-4fa5-b51b-6777852b3531n%40googlegroups.com.

[Craig]

Hey Aaron - that's a good point.

Generally speaking squelch should be OFF during packet modes. DigiPi
doesn't mind listening to static :)

-craig
KM6LYW