Yet another question

[TL NELSON]

I have my digipi running the APRS TNC/igate.  Is there an option to include repeater information inside the digipi?

I'm operating without SSID only wd3na, but when I check APRS.fi its show that I'm a wd3na-2.  The only information being showed is DigiPi.

Side note I do have a -7 also being listed from my handheld.  Its not every active.

Thanks in advance

Terry - WD3NA

[Craig]

If you're referring to the "comment string" in your DigiPi APRS TNC/Igate position beacon, that
info is in direwolf.tnc.conf.

Shell
password=raspberry
sudo remount
sudo nano direwolf.tnc.conf


if it helps,
-craig
KM6LYW

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/227172ca-c4c7-4564-bc6f-2ab1841c6ff2n%40googlegroups.com.

[TL NELSON]

Awesome, thanks.

I made the changes.

Thanks again

Terry - wd3na