Digipeater on new image. What am I missing?

[Tim Carlo]

Trying to get the digipeater running on the new 2.0.1 image.  Running fine on 1.8.3.  Sound card is DigiRig Mobile.  All the same hardware, just swapping in the new image on a different card.  The packet log does not show received packets via RF. 

Please list some things to check.  Like I said, all the same hardware just swapping out 1.8.3 image on one card for 2.0.1 on another card.  So it seems I have isolated to config / settings.  Sound card is DigiRig Mobile.  

Regards,

Tim Carlo

[Craig]

PktLog is the right place to check for incoming packets and to confirm PTT configured.

If you're sure packets are in your area, but you're not decoding, confirm your audio
path/cables, then also click "Audio", and press "[F4]" to see your capture volumes.
Make sure they're up, and nothing is muted (easier if you use a PC/mac keyboard).

-craig
KM6LYW

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/CAFeeankHx6R3PYy7fyMNHg3dVjodPVAY_qHQXEhH0uraQhh0LA%40mail.gmail.com.

[Tim Carlo]

All the same hardware and cabling, just swapping out the micro SD card.  I think I was looking at Playback in AlsaMixer and not Capture.  

THANKS!!!   

Regards,

Tim Carlo