DigiPi and FTM-300

[Ed Turkowski]

Connected digipi to ftm-300 via digirig mobile using digirig cables with 10pin DIN. Selected correct display ILI9486 and DigiMobile upon initialization. Display has the correct banner at top and Red/Green circles indicators. Green flashes upon receiving a signal. PROBLEM: Screen does not display received data remains blank. Swap all cables, rebuild image etc no joy.

Tried with a DRA-50 cobbled together, and it displays data.

Ideas??

Thanks

[Craig]

Hi Ed, that's a cool rig, i'd like to see it work.  the ct167 10-pin cable is the same
as the other yaesu mobile units (ftm400 works here, but i don't have a digirig).

That rig doesn't have the ASP/noise reduction does it?  

Volume up?  tho, it shouldn't matter.

Current VFO active?   lower vfo?

Click PktLog for a better idea of what's happening.


and let us know, thanks,
-craig
KM6LYW

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/49a24c3e-1139-433b-968c-ab92602471ebn%40googlegroups.com.