DigiPi Hat GPS

351 views

Skip to first unread message

David Raybould

unread,

Oct 31, 2024, 11:26:25 AM10/31/24

to DigiPi

Hi, apologies if this has already been discussed.

I have the DigiPi Hat, I have it running happily with Baofeng radio but want to use as a tracker.

I have the GPS module but for the life of me I can’t seem to get it working. It’s plugged in and the red LED is lit but that’s it.

I have amended Direwolf.tnc.conf, changed settings in /dev/default/gpsd and nothing.

Can anyone give me a run down of their settings and how they got this working.

DigiPi V1.9

Thanks in anticipation

de Dave G7HJX

Sent from my iPhone

MI7DJT

unread,

Oct 31, 2024, 11:39:50 AM10/31/24

to David Raybould, DigiPi

Hi David,

I'd run dmesg in the terminal to find the hardware address of the gps. Should be something like /dev/AMA0 or similar.

You should see where to edit it in the configs you've edited.

Good luck,

Eamon - MI7DJT

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/8AF7D26F-FF60-4147-A654-77A0A8A49DB3%40gmail.com.

Craig

unread,

Oct 31, 2024, 11:51:37 AM10/31/24

to MI7DJT, David Raybould, DigiPi

... and run "cgps" to see if you're getting any data.

The GPS should be blinking if it has a lock. I had to take mine outside for a few minutes to get the initial lock.

-craig
KM6LYW

To view this discussion visit https://groups.google.com/d/msgid/digipi/CABi%3Dfsrk6eT-DXFTHRrCKWfrqybd9MUi7iWVbKW-uibeNy_t-Q%40mail.gmail.com.

David Raybould

unread,

Oct 31, 2024, 1:13:21 PM10/31/24

to Craig, MI7DJT, DigiPi

Thank you both, I couldn't see anything in dmesg but unsure what I'm looking for?

See at the bottom if it helps.

This is all I see in CGPS, with the DigiPi sitting outside for a considerable length of time.

I tried it with a USB GPS dongle which worked fine after changing from /dev/ttyUSB1 > ACM0

I can't think what else to try, any thoughts?

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]

[ 0.000000] Linux version 6.1.74-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1725 SMP PREEMPT Mon Jan 22 13:35:32 GMT 2024

[ 0.000000] random: crng init done

[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0

[ 0.000000] efi: UEFI not found.

[ 0.000000] Reserved memory: created CMA memory pool at 0x000000003bc00000, size 64 MiB

[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool

[ 0.000000] Zone ranges:

[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]

[ 0.000000] DMA32 empty

[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]

[ 0.000000] Movable zone start for each node

[ 0.000000] Early memory node ranges

[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]

[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff]

[ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff]

[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]

[ 0.000000] On node 0, zone DMA: 1024 pages in unavailable ranges

[ 0.000000] psci: probing for conduit method from DT.

[ 0.000000] psci: PSCIv1.1 detected in firmware.

[ 0.000000] psci: Using standard PSCI v0.2 function IDs

[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.

[ 0.000000] psci: SMC Calling Convention v1.2

[ 0.000000] percpu: Embedded 29 pages/cpu s79208 r8192 d31384 u118784

[ 0.000000] pcpu-alloc: s79208 r8192 d31384 u118784 alloc=29*4096

[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

[ 0.000000] Detected PIPT I-cache on CPU0

[ 0.000000] CPU features: detected: Virtualization Host Extensions

[ 0.000000] CPU features: detected: Hardware dirty bit management

[ 0.000000] CPU features: detected: Spectre-v4

[ 0.000000] CPU features: detected: Spectre-BHB

[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR

[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)

[ 0.000000] alternatives: applying boot alternatives

[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063360

[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=D8:3A:DD:E6:40:84 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=60bac01f-02 rootfstype=ext4 fsck.repair=yes rootwait

[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)

[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)

[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off

[ 0.000000] software IO TLB: area num 4.

[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)

[ 0.000000] Memory: 8056288K/8384512K available (12224K kernel code, 2172K rwdata, 4120K rodata, 4352K init, 1083K bss, 262688K reserved, 65536K cma-reserved)

[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[ 0.000000] ftrace: allocating 41384 entries in 162 pages

[ 0.000000] ftrace: allocated 162 pages with 3 groups

[ 0.000000] trace event string verifier disabled

[ 0.000000] rcu: Preemptible hierarchical RCU implementation.

[ 0.000000] rcu: RCU event tracing is enabled.

[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.

[ 0.000000] Trampoline variant of Tasks RCU enabled.

[ 0.000000] Rude variant of Tasks RCU enabled.

[ 0.000000] Tracing variant of Tasks RCU enabled.

[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.

[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4

[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0

[ 0.000000] Root IRQ handler: gic_handle_irq

[ 0.000000] GIC: Using split EOI/Deactivate mode

[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.

[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).

[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns

[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns

[ 0.000150] Console: colour dummy device 80x25

[ 0.000288] printk: console [tty1] enabled

[ 0.000304] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)

[ 0.000311] pid_max: default: 32768 minimum: 301

[ 0.000340] LSM: Security Framework initializing

[ 0.000398] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)

[ 0.000423] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)

[ 0.000751] cgroup: Disabling memory control group subsystem

[ 0.001135] cblist_init_generic: Setting adjustable number of callback queues.

[ 0.001145] cblist_init_generic: Setting shift to 2 and lim to 1.

[ 0.001174] cblist_init_generic: Setting adjustable number of callback queues.

[ 0.001179] cblist_init_generic: Setting shift to 2 and lim to 1.

[ 0.001206] cblist_init_generic: Setting adjustable number of callback queues.

[ 0.001210] cblist_init_generic: Setting shift to 2 and lim to 1.

[ 0.001279] rcu: Hierarchical SRCU implementation.

[ 0.001283] rcu: Max phase no-delay instances is 1000.

[ 0.001884] EFI services will not be available.

[ 0.001986] smp: Bringing up secondary CPUs ...

[ 0.002188] Detected PIPT I-cache on CPU1

[ 0.002238] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]

[ 0.002456] Detected PIPT I-cache on CPU2

[ 0.002497] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]

[ 0.002702] Detected PIPT I-cache on CPU3

[ 0.002738] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]

[ 0.002765] smp: Brought up 1 node, 4 CPUs

[ 0.002783] SMP: Total of 4 processors activated.

[ 0.002788] CPU features: detected: 32-bit EL0 Support

[ 0.002791] CPU features: detected: Data cache clean to the PoU not required for I/D coherence

[ 0.002796] CPU features: detected: Common not Private translations

[ 0.002799] CPU features: detected: CRC32 instructions

[ 0.002803] CPU features: detected: RCpc load-acquire (LDAPR)

[ 0.002806] CPU features: detected: LSE atomic instructions

[ 0.002810] CPU features: detected: Privileged Access Never

[ 0.002813] CPU features: detected: RAS Extension Support

[ 0.002817] CPU features: detected: Speculative Store Bypassing Safe (SSBS)

[ 0.002854] CPU: All CPU(s) started at EL2

[ 0.002857] alternatives: applying system-wide alternatives

[ 0.004763] devtmpfs: initialized

[ 0.007722] Enabled cp15_barrier support

[ 0.007732] Enabled setend support

[ 0.007778] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[ 0.007787] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)

[ 0.008510] pinctrl core: initialized pinctrl subsystem

[ 0.008679] DMI not present or invalid.

[ 0.008846] NET: Registered PF_NETLINK/PF_ROUTE protocol family

[ 0.009273] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations

[ 0.009334] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations

[ 0.009422] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations

[ 0.009448] audit: initializing netlink subsys (disabled)

[ 0.009492] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1

[ 0.009611] thermal_sys: Registered thermal governor 'step_wise'

[ 0.009624] cpuidle: using governor menu

[ 0.009721] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.

[ 0.009752] ASID allocator initialised with 32768 entries

[ 0.010046] Serial: AMBA PL011 UART driver

[ 0.010784] bcm2835-mbox 107c013880.mailbox: mailbox enabled

[ 0.010932] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2

[ 0.016422] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-04-20T10:53:30, variant start_cd

[ 0.020422] raspberrypi-firmware soc:firmware: Firmware hash is d1744d2100000000000000000000000000000000

[ 0.026569] KASLR enabled

[ 0.034667] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1

[ 0.035259] iommu: Default domain type: Translated

[ 0.035264] iommu: DMA domain TLB invalidation policy: strict mode

[ 0.035361] SCSI subsystem initialized

[ 0.035404] usbcore: registered new interface driver usbfs

[ 0.035415] usbcore: registered new interface driver hub

[ 0.035424] usbcore: registered new device driver usb

[ 0.035462] usb_phy_generic phy: supply vcc not found, using dummy regulator

[ 0.035533] pps_core: LinuxPPS API ver. 1 registered

[ 0.035544] PTP clock support registered

[ 0.035760] vgaarb: loaded

[ 0.035903] clocksource: Switched to clocksource arch_sys_counter

[ 0.036027] VFS: Disk quotas dquot_6.6.0

[ 0.036043] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 0.036066] FS-Cache: Loaded

[ 0.036091] CacheFiles: Loaded

[ 0.037330] NET: Registered PF_INET protocol family

[ 0.037519] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)

[ 0.039972] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)

[ 0.040018] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)

[ 0.040027] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)

[ 0.040312] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)

[ 0.042000] TCP: Hash tables configured (established 65536 bind 65536)

[ 0.042146] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)

[ 0.042259] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)

[ 0.042362] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)

[ 0.042515] NET: Registered PF_UNIX/PF_LOCAL protocol family

[ 0.042697] RPC: Registered named UNIX socket transport module.

[ 0.042703] RPC: Registered udp transport module.

[ 0.042706] RPC: Registered tcp transport module.

[ 0.042708] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 0.042714] PCI: CLS 0 bytes, default 64

[ 0.042853] Trying to unpack rootfs image as initramfs...

[ 0.052307] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available

[ 0.052447] kvm [1]: IPA Size Limit: 40 bits

[ 0.052499] kvm [1]: vgic interrupt IRQ9

[ 0.052535] kvm [1]: VHE mode initialized successfully

[ 0.216611] Freeing initrd memory: 10996K

[ 0.333923] Initialise system trusted keyrings

[ 0.334079] workingset: timestamp_bits=46 max_order=21 bucket_order=0

[ 0.335785] zbud: loaded

[ 0.336394] NFS: Registering the id_resolver key type

[ 0.336404] Key type id_resolver registered

[ 0.336407] Key type id_legacy registered

[ 0.336432] nfs4filelayout_init: NFSv4 File Layout Driver Registering...

[ 0.336436] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...

[ 0.336714] Key type asymmetric registered

[ 0.336719] Asymmetric key parser 'x509' registered

[ 0.336739] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)

[ 0.336796] io scheduler mq-deadline registered

[ 0.336801] io scheduler kyber registered

[ 0.337233] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 30)

[ 0.337295] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 31)

[ 0.337337] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 32)

[ 0.337381] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 33)

[ 0.338257] gpio-461 (RP1 RUN pin): hogged as output/high

[ 0.339607] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.

[ 0.339614] bcm2708_fb: probe of soc:fb failed with error -2

[ 0.373978] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled

[ 0.374267] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 35, base_baud = 6000000) is a 16550A

[ 0.374303] serial serial0: tty port ttyS0 registered

[ 0.374584] iproc-rng200 107d208000.rng: hwrng registered

[ 0.374640] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)

[ 0.374857] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe

[ 0.376823] brd: module loaded

[ 0.378227] loop: module loaded

[ 0.378356] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver

[ 0.378480] Loading iSCSI transport class v2.0-870.

[ 0.379324] usbcore: registered new device driver r8152-cfgselector

[ 0.379336] usbcore: registered new interface driver r8152

[ 0.379349] usbcore: registered new interface driver lan78xx

[ 0.379360] usbcore: registered new interface driver smsc95xx

[ 0.379439] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[ 0.379461] dwc_otg: FIQ enabled

[ 0.379463] dwc_otg: NAK holdoff enabled

[ 0.379464] dwc_otg: FIQ split-transaction FSM enabled

[ 0.379466] Module dwc_common_port init

[ 0.379610] usbcore: registered new interface driver uas

[ 0.379623] usbcore: registered new interface driver usb-storage

[ 0.379704] mousedev: PS/2 mouse device common for all mice

[ 0.388082] rpi-rtc soc:rpi_rtc: registered as rtc0

[ 0.389607] rpi-rtc soc:rpi_rtc: setting system clock to 2024-10-31T16:30:50 UTC (1730392250)

[ 0.389925] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!

[ 0.389931] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer

[ 0.392358] sdhci: Secure Digital Host Controller Interface driver

[ 0.392363] sdhci: Copyright(c) Pierre Ossman

[ 0.392402] sdhci-pltfm: SDHCI platform and OF driver helper

[ 0.392568] ledtrig-cpu: registered to indicate activity on CPUs

[ 0.392606] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....

[ 0.392620] hid: raw HID events driver (C) Jiri Kosina

[ 0.392645] usbcore: registered new interface driver usbhid

[ 0.392648] usbhid: USB HID core driver

[ 0.392774] NET: Registered PF_PACKET protocol family

[ 0.392798] Key type dns_resolver registered

[ 0.393051] registered taskstats version 1

[ 0.393068] Loading compiled-in X.509 certificates

[ 0.393228] Key type .fscrypt registered

[ 0.393233] Key type fscrypt-provisioning registered

[ 0.394653] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:

[ 0.394665] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff]

[ 0.394679] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000

[ 0.394689] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000

[ 0.394701] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000

[ 0.394708] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000

[ 0.395887] brcm-pcie 1000120000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE

[ 0.395897] brcm-pcie 1000120000.pcie: Forcing gen 2

[ 0.395945] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00

[ 0.395950] pci_bus 0000:00: root bus resource [bus 00-ff]

[ 0.395956] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])

[ 0.395962] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])

[ 0.395977] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400

[ 0.396006] pci 0000:00:00.0: PME# supported from D0 D3hot

[ 0.397000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring

[ 0.503907] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)

[ 0.503930] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000

[ 0.503947] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]

[ 0.503957] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]

[ 0.503966] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]

[ 0.504039] pci 0000:01:00.0: supports D1

[ 0.504042] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold

[ 0.515914] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01

[ 0.515926] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]

[ 0.515932] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]

[ 0.515940] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]

[ 0.515946] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]

[ 0.515954] pci 0000:00:00.0: PCI bridge to [bus 01]

[ 0.515959] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]

[ 0.515966] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512

[ 0.515977] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512

[ 0.516042] pcieport 0000:00:00.0: enabling device (0000 -> 0002)

[ 0.516082] pcieport 0000:00:00.0: PME: Signaling with IRQ 36

[ 0.516139] pcieport 0000:00:00.0: AER: enabled with IRQ 36

[ 0.516211] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200

[ 0.516218] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200

[ 0.516230] rp1 0000:01:00.0: enabling device (0000 -> 0002)

[ 0.516972] rp1 0000:01:00.0: chip_id 0x20001927

[ 0.540121] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 104 (d8:3a:dd:e6:40:84)

[ 0.540661] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels

[ 0.599975] xhci-hcd xhci-hcd.0: xHCI Host Controller

[ 0.599986] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1

[ 0.600438] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810

[ 0.600453] xhci-hcd xhci-hcd.0: irq 129, io mem 0x1f00200000

[ 0.600523] xhci-hcd xhci-hcd.0: xHCI Host Controller

[ 0.600528] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2

[ 0.600533] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed

[ 0.600597] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01

[ 0.600604] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.600610] usb usb1: Product: xHCI Host Controller

[ 0.600614] usb usb1: Manufacturer: Linux 6.1.74-v8+ xhci-hcd

[ 0.600618] usb usb1: SerialNumber: xhci-hcd.0

[ 0.600753] hub 1-0:1.0: USB hub found

[ 0.600768] hub 1-0:1.0: 2 ports detected

[ 0.600905] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01

[ 0.600911] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.600916] usb usb2: Product: xHCI Host Controller

[ 0.600920] usb usb2: Manufacturer: Linux 6.1.74-v8+ xhci-hcd

[ 0.600923] usb usb2: SerialNumber: xhci-hcd.0

[ 0.601011] hub 2-0:1.0: USB hub found

[ 0.601024] hub 2-0:1.0: 1 port detected

[ 0.659967] xhci-hcd xhci-hcd.1: xHCI Host Controller

[ 0.659977] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3

[ 0.680586] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810

[ 0.680601] xhci-hcd xhci-hcd.1: irq 134, io mem 0x1f00300000

[ 0.680669] xhci-hcd xhci-hcd.1: xHCI Host Controller

[ 0.680674] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4

[ 0.680680] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed

[ 0.680734] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01

[ 0.680740] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.680745] usb usb3: Product: xHCI Host Controller

[ 0.680749] usb usb3: Manufacturer: Linux 6.1.74-v8+ xhci-hcd

[ 0.680752] usb usb3: SerialNumber: xhci-hcd.1

[ 0.680847] hub 3-0:1.0: USB hub found

[ 0.680861] hub 3-0:1.0: 2 ports detected

[ 0.680986] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01

[ 0.680992] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 0.680997] usb usb4: Product: xHCI Host Controller

[ 0.681001] usb usb4: Manufacturer: Linux 6.1.74-v8+ xhci-hcd

[ 0.681004] usb usb4: SerialNumber: xhci-hcd.1

[ 0.681090] hub 4-0:1.0: USB hub found

[ 0.681103] hub 4-0:1.0: 1 port detected

[ 0.681772] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774

[ 0.682076] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu

[ 0.682081] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu

[ 0.682089] platform 1000800000.codec: Adding to iommu group 0

[ 0.682101] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu

[ 0.682106] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu

[ 0.682112] platform 1000880000.pisp_be: Adding to iommu group 0

[ 0.682144] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu

[ 0.682149] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu

[ 0.682155] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success

[ 0.682558] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774

[ 0.682862] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success

[ 0.683281] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774

[ 0.683583] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success

[ 0.683705] sdhci-brcmstb 1000fff000.mmc: there is not valid maps for state default

[ 0.684049] mmc1: CQHCI version 5.10

[ 0.684062] mmc0: CQHCI version 5.10

[ 0.684201] pl011-axi 1f00030000.serial: cts_event_workaround enabled

[ 0.684228] 1f00030000.serial: ttyAMA0 at MMIO 0x1f00030000 (irq = 123, base_baud = 0) is a PL011 AXI

[ 0.685319] of_cfs_init

[ 0.685355] of_cfs_init: OK

[ 0.719884] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit

[ 0.816083] mmc0: new ultra high speed DDR50 SDHC card at address aaaa

[ 0.816321] mmcblk0: mmc0:aaaa SS08G 7.40 GiB

[ 0.818557] mmcblk0: p1 p2

[ 0.818669] mmcblk0: mmc0:aaaa SS08G 7.40 GiB (quirks 0x00004000)

[ 0.855905] usb 1-2: new full-speed USB device number 2 using xhci-hcd

[ 0.874447] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit

[ 0.878038] Freeing unused kernel memory: 4352K

[ 0.878092] Run /init as init process

[ 0.878096] with arguments:

[ 0.878097] /init

[ 0.878098] with environment:

[ 0.878099] HOME=/

[ 0.878100] TERM=linux

[ 0.904979] mmc1: new ultra high speed DDR50 SDIO card at address 0001

[ 0.935933] usb 3-2: new high-speed USB device number 2 using xhci-hcd

[ 1.020628] usb 1-2: New USB device found, idVendor=1546, idProduct=01a7, bcdDevice= 1.00

[ 1.020648] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 1.020654] usb 1-2: Product: u-blox 7 - GPS/GNSS Receiver

[ 1.020658] usb 1-2: Manufacturer: u-blox AG - www.u-blox.com

[ 1.085608] usb 3-2: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00

[ 1.085625] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[ 1.085631] usb 3-2: Product: USB2.0 HUB

[ 1.128922] hub 3-2:1.0: USB hub found

[ 1.129234] hub 3-2:1.0: 4 ports detected

[ 1.406368] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.

[ 1.419911] usb 3-2.1: new full-speed USB device number 3 using xhci-hcd

[ 1.548254] usb 3-2.1: New USB device found, idVendor=0d8c, idProduct=013c, bcdDevice= 1.00

[ 1.548270] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 1.548276] usb 3-2.1: Product: USB PnP Sound Device

[ 1.548280] usb 3-2.1: Manufacturer: C-Media Electronics Inc.

[ 1.612310] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/platform/axi/1000120000.pcie/1f00300000.usb/xhci-hcd.1/usb3/3-2/3-2.1/3-2.1:1.3/0003:0D8C:013C.0001/input/input0

[ 1.671980] hid-generic 0003:0D8C:013C.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-xhci-hcd.1-2.1/input3

[ 1.755906] usb 3-2.2: new full-speed USB device number 4 using xhci-hcd

[ 1.869767] usb 3-2.2: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64

[ 1.869777] usb 3-2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0

[ 1.869782] usb 3-2.2: Product: USB Serial

[ 1.888440] NET: Registered PF_INET6 protocol family

[ 1.888846] Segment Routing with IPv6

[ 1.888856] In-situ OAM (IOAM) with IPv6

[ 1.932709] systemd[1]: systemd 252.30-1~deb12u2+rpi1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)

[ 1.932733] systemd[1]: Detected architecture arm64.

[ 1.941513] systemd[1]: Hostname set to <digipi>.

[ 2.011936] usb 3-2.3: new full-speed USB device number 5 using xhci-hcd

[ 2.117780] usb 3-2.3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64

[ 2.117798] usb 3-2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0

[ 2.117803] usb 3-2.3: Product: USB Serial

[ 2.405724] systemd[1]: Queued start job for default target multi-user.target.

[ 2.432767] systemd[1]: Created slice system-getty.slice - Slice /system/getty.

[ 2.433352] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.

[ 2.433844] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.

[ 2.434113] systemd[1]: Created slice user.slice - User and Session Slice.

[ 2.434267] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.

[ 2.434392] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.

[ 2.434681] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.

[ 2.434781] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-60bac01f\x2d01.device - /dev/disk/by-partuuid/60bac01f-01...

[ 2.434869] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.

[ 2.434963] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.

[ 2.435093] systemd[1]: Reached target paths.target - Path Units.

[ 2.435229] systemd[1]: Reached target slices.target - Slice Units.

[ 2.435313] systemd[1]: Reached target swap.target - Swaps.

[ 2.435384] systemd[1]: Reached target time-set.target - System Time Set.

[ 2.435565] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.

[ 2.435823] systemd[1]: Listening on syslog.socket - Syslog Socket.

[ 2.441135] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.

[ 2.441297] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.

[ 2.441649] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.

[ 2.441861] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).

[ 2.442084] systemd[1]: Listening on systemd-journald.socket - Journal Socket.

[ 2.444032] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.

[ 2.444232] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.

[ 2.444487] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).

[ 2.445394] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...

[ 2.446486] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...

[ 2.447521] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...

[ 2.447832] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).

[ 2.450065] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...

[ 2.452511] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...

[ 2.453931] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...

[ 2.455368] systemd[1]: Starting modp...@configfs.service - Load Kernel Module configfs...

[ 2.456868] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...

[ 2.458468] systemd[1]: Starting modp...@drm.service - Load Kernel Module drm...

[ 2.460094] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...

[ 2.461695] systemd[1]: Starting modp...@fuse.service - Load Kernel Module fuse...

[ 2.463268] systemd[1]: Starting modp...@loop.service - Load Kernel Module loop...

[ 2.463669] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).

[ 2.465945] systemd[1]: Starting systemd-journald.service - Journal Service...

[ 2.470185] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...

[ 2.471583] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...

[ 2.473201] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...

[ 2.475704] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.

[ 2.475919] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.

[ 2.476083] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.

[ 2.476352] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.

[ 2.476836] systemd[1]: modp...@configfs.service: Deactivated successfully.

[ 2.477000] systemd[1]: Finished modp...@configfs.service - Load Kernel Module configfs.

[ 2.477405] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.

[ 2.477580] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.

[ 2.477986] systemd[1]: modp...@loop.service: Deactivated successfully.

[ 2.478218] systemd[1]: Finished modp...@loop.service - Load Kernel Module loop.

[ 2.480077] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...

[ 2.482411] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.

[ 2.506224] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

[ 2.509419] fuse: init (API version 7.37)

[ 2.509585] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.

[ 2.509961] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).

[ 2.510065] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).

[ 2.510358] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-d...@redhat.com

[ 2.511449] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...

[ 2.511619] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met.

[ 2.512976] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...

[ 2.513626] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.

[ 2.513824] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.

[ 2.516557] systemd[1]: modp...@drm.service: Deactivated successfully.

[ 2.516711] systemd[1]: Finished modp...@drm.service - Load Kernel Module drm.

[ 2.517251] systemd[1]: modp...@fuse.service: Deactivated successfully.

[ 2.517401] systemd[1]: Finished modp...@fuse.service - Load Kernel Module fuse.

[ 2.518805] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...

[ 2.518939] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.

[ 2.521957] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.

[ 2.543176] i2c_dev: i2c /dev entries driver

[ 2.544274] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.

[ 2.545664] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...

[ 2.563317] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.

[ 2.563717] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.

[ 2.563943] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).

[ 2.584165] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.

[ 2.588154] systemd[1]: Started systemd-journald.service - Journal Service.

[ 2.912152] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040

[ 2.914796] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1

[ 2.914905] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040

[ 2.914950] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2

[ 2.914982] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020

[ 2.915018] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3

[ 2.915047] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020

[ 2.915080] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4

[ 2.915186] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000

[ 2.915300] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0

[ 3.027160] mc: Linux media interface: v0.10

[ 3.038877] input: pwr_button as /devices/platform/pwr_button/input/input1

[ 3.069152] videodev: Linux video capture interface: v2.00

[ 3.180279] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[ 3.193999] cfg80211: Loaded X.509 cert 'be...@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'

[ 3.194334] cfg80211: Loaded X.509 cert 'romain...@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'

[ 3.194649] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'

[ 3.194965] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[ 3.210436] usbcore: registered new interface driver usbserial_generic

[ 3.210459] usbserial: USB Serial support registered for generic

[ 3.211591] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu

[ 3.211741] pispbe 1000880000.pisp_be: pispbe_probe: HW version: 0x02252700

[ 3.211745] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000

[ 3.211747] pispbe 1000880000.pisp_be: pispbe_probe: Status: 0x00000000

[ 3.211749] pispbe 1000880000.pisp_be: Register nodes for group 0

[ 3.211934] pispbe 1000880000.pisp_be: input device node registered as /dev/video20

[ 3.213403] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video21

[ 3.213538] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video22

[ 3.213736] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video23

[ 3.213845] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video24

[ 3.214013] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video25

[ 3.214189] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video26

[ 3.214300] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video27

[ 3.214405] pispbe 1000880000.pisp_be: config device node registered as /dev/video28

[ 3.214750] pispbe 1000880000.pisp_be: Register nodes for group 1

[ 3.215623] pispbe 1000880000.pisp_be: input device node registered as /dev/video29

[ 3.215766] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video30

[ 3.216110] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video31

[ 3.216965] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video32

[ 3.217114] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video33

[ 3.217218] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video34

[ 3.217260] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video35

[ 3.217438] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video36

[ 3.218720] usbcore: registered new interface driver ch341

[ 3.218738] usbserial: USB Serial support registered for ch341-uart

[ 3.218774] ch341 3-2.2:1.0: ch341-uart converter detected

[ 3.218875] pispbe 1000880000.pisp_be: config device node registered as /dev/video37

[ 3.221517] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.

[ 3.222486] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu

[ 3.223807] cdc_acm 1-2:1.0: ttyACM0: USB ACM device

[ 3.223856] usbcore: registered new interface driver cdc_acm

[ 3.223859] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[ 3.225919] usb 3-2.2: ch341-uart converter now attached to ttyUSB0

[ 3.225990] ch341 3-2.3:1.0: ch341-uart converter detected

[ 3.230913] usb 3-2.3: ch341-uart converter now attached to ttyUSB1

[ 3.320075] brcmfmac: F1 signature read @0x18000000=0x15264345

[ 3.323965] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6

[ 3.324304] usbcore: registered new interface driver brcmfmac

[ 3.332066] rpivid 1000800000.codec: Device registered as /dev/video19

[ 3.340014] Bluetooth: Core ver 2.22

[ 3.340054] NET: Registered PF_BLUETOOTH protocol family

[ 3.340056] Bluetooth: HCI device and connection manager initialized

[ 3.340064] Bluetooth: HCI socket layer initialized

[ 3.340069] Bluetooth: L2CAP socket layer initialized

[ 3.340074] Bluetooth: SCO socket layer initialized

[ 3.359332] Bluetooth: HCI UART driver ver 2.3

[ 3.359340] Bluetooth: HCI UART protocol H4 registered

[ 3.359367] Bluetooth: HCI UART protocol Three-wire (H5) registered

[ 3.359447] Bluetooth: HCI UART protocol Broadcom registered

[ 3.359520] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator

[ 3.359590] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator

[ 3.511265] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b

[ 3.545534] usbcore: registered new interface driver snd-usb-audio

[ 3.616968] sgtl5000 1-000a: Error reading chip id -121

[ 3.617176] sgtl5000: probe of 1-000a failed with error -121

[ 3.632166] systemd-journald[287]: Received client request to flush runtime journal.

[ 3.720400] Bluetooth: hci0: BCM: chip id 107

[ 3.720615] Bluetooth: hci0: BCM: features 0x2f

[ 3.721713] Bluetooth: hci0: BCM4345C0

[ 3.721717] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000

[ 3.738131] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch

[ 4.112732] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 4.112740] Bluetooth: BNEP filters: protocol multicast

[ 4.112747] Bluetooth: BNEP socket layer initialized

[ 4.436567] Bluetooth: hci0: BCM: features 0x2f

[ 4.437916] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190

[ 4.437918] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382

[ 4.438238] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)

[ 4.455639] Bluetooth: MGMT ver 1.22

[ 4.462239] NET: Registered PF_ALG protocol family

[ 4.866743] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)

[ 4.866753] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode

[ 4.870152] pps pps0: new PPS source ptp0

[ 4.871637] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.

[ 4.906097] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled

[ 5.415624] pps_ldisc: PPS line discipline registered

[ 5.416027] pps pps1: new PPS source acm0

[ 5.416038] pps pps1: source "/dev/ttyACM0" added

[ 11.002405] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 11.262337] hwmon hwmon3: Undervoltage detected!

[ 13.284932] hwmon hwmon3: Voltage normalised

[ 13.796105] platform soc:sound: deferred probe pending

[ 21.682508] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled

[ 54.334164] Bluetooth: RFCOMM TTY layer initialized

[ 54.334176] Bluetooth: RFCOMM socket layer initialized

[ 54.334183] Bluetooth: RFCOMM ver 1.11

[ 71.484840] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

[ 525.780029] hwmon hwmon3: Undervoltage detected!

[ 527.795927] hwmon hwmon3: Voltage normalised

[ 582.221829] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

From: Craig <km6...@gmail.com>
Sent: 31 October 2024 15:51
To: MI7DJT <eamonj...@gmail.com>; David Raybould <david...@gmail.com>
Cc: DigiPi <dig...@googlegroups.com>
Subject: Re: [DigiPi] DigiPi Hat GPS

Craig

unread,

Oct 31, 2024, 1:17:30 PM10/31/24

to David Raybould, MI7DJT, DigiPi

It looks like you're reading the gps on ttyUSB1 . I think that's legit for the DigiPi Hat (as
the ptt stuff happens on ttyUSB0).

Additionally, you don't have a GPS lock yet. When you do, the LED on the bottom
of the gps will start blinking, and the cgps data will all be populated (not n/a).

You really do need to take it outside, away from noise, few trees, at least for
the initial lock... subsequent locks will be faster (it stores the last solution in memory
for a while).

cool,
-craig
KM6LYW

David Raybould

unread,

Oct 31, 2024, 1:21:35 PM10/31/24

to Craig, MI7DJT, DigiPi

Thanks Craig, it was sat in the middle of my garden for a full 1/2 hour, the most my battery pack could manage hi hi.

If all seems configured correctly I will try for longer tomorrow.

As always thanks for the help.

Dave

Sent from my iPhone

On 31 Oct 2024, at 17:17, Craig <km6...@gmail.com> wrote:

It looks like you're reading the gps on ttyUSB1 . I think that's legit for the DigiPi Hat (as

the ptt stuff happens on ttyUSB0).

Additionally, you don't have a GPS lock yet. When you do, the LED on the bottom
of the gps will start blinking, and the cgps data will all be populated (not n/a).

You really do need to take it outside, away from noise, few trees, at least for
the initial lock... subsequent locks will be faster (it stores the last solution in memory
for a while).

cool,
-craig
KM6LYW

On 10/31/24 10:13, David Raybould wrote:

Thank you both, I couldn't see anything in dmesg but unsure what I'm looking for?

See at the bottom if it helps.

This is all I see in CGPS, with the DigiPi sitting outside for a considerable length of time.

David Raybould

unread,

Nov 1, 2024, 11:03:52 AM11/1/24

to Craig, MI7DJT, DigiPi

Hi all, well I’m pleased to report it is now working after leaving it on top of the car for an extended period. Clearly my back garden has a terrible view of the sky.

One odd observation is that CGPS with the serial GPS module gives the correct location but no satellites populate the seen/used field. The USB GPS does show the satellites seen/used, not really an issue.

What have I learned from this other than I need more patience?

dmesg only shows the serial converters USB address (I had incorrectly assumed it was an i2c device) and the serial GPS appears to be less sensitive than the USB GPS.

Thanks Guys

Sent from my iPhone

On 31 Oct 2024, at 17:17, Craig <km6...@gmail.com> wrote:

It looks like you're reading the gps on ttyUSB1 . I think that's legit for the DigiPi Hat (as

the ptt stuff happens on ttyUSB0).

Additionally, you don't have a GPS lock yet. When you do, the LED on the bottom
of the gps will start blinking, and the cgps data will all be populated (not n/a).

You really do need to take it outside, away from noise, few trees, at least for
the initial lock... subsequent locks will be faster (it stores the last solution in memory
for a while).

cool,
-craig
KM6LYW

On 10/31/24 10:13, David Raybould wrote:

Thank you both, I couldn't see anything in dmesg but unsure what I'm looking for?

See at the bottom if it helps.

This is all I see in CGPS, with the DigiPi sitting outside for a considerable length of time.