BBS / WINLINK Hangs

[Michael Hopwood]

I am connecting to my node and there is no response from the node no matter what I type. 

Winlink hangs on checking for new mail.

I'm running 1.9-4.

Here is my pklog for BBS

Dire Wolf version 1.8 KM6LYW-6
Includes optional support for:  gpsd hamlib cm108-ptt libgpiod dns-sd

Reading config file /run/direwolf.node.conf
Audio device for both receive and transmit: default  (channel 0)
Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100 sample rate / 3, Tx AX.25.
Ready to accept AGW client application 0 on port 8000 ...
Ready to accept KISS TCP client application 0 on port 8001 ...
DNS-SD: Avahi: Announcing KISS TCP on port 8001 as 'Dire Wolf on digipi'
Virtual KISS TNC is available on /dev/pts/0
Created symlink /tmp/kisstnc -> /dev/pts/0
DNS-SD: Avahi: Service 'Dire Wolf on digipi' successfully registered.

KE5EUA audio level = 196(73/66)    __||||___
Audio input level is too high.  Reduce so most stations are around 50.
[0.3] KE5EUA>KE5EUA-4:(SABM cmd, p=1)
[0L] KE5EUA-4>KE5EUA:(UA res, f=1)
[0L] KE5EUA-4>KE5EUA:(I cmd, n(s)=0, n(r)=0, p=0, pid=0xf0)URONode v2.15 - Welcome to KE5EUA-4<0x0d><0x0d>  USERS - list connected users     <0x0d>  TALK  - TALK callsign "message text"<0x0d>  EMAIL - Winlink command line email  <0x0d>  WEB   - Display web sites<0x0d>  ZORK  - Play Zork!<0x0d>  HITCH - Play Hitchiker's Guide<0x0d>  NODES - List nearby<0x20>
[0L] KE5EUA-4>KE5EUA:(I cmd, n(s)=1, n(r)=0, p=1, pid=0xf0)nodenames<0x0d>  CONN  - CONNect radio nodename<0x0d>  ?     - Complete list of commands<0x0d><0x0d>Welcome, new user! Please use the Info and ? commands.<0x0d><0x0d>

KE5EUA audio level = 187(68/61)    ___||||__
Audio input level is too high.  Reduce so most stations are around 50.
[0.4] KE5EUA>KE5EUA-4:(RR cmd, n(r)=2, p=0)
[0L] KE5EUA-4>KE5EUA:(I cmd, n(s)=2, n(r)=0, p=0, pid=0xf0)<0x0d>=><0x20>

KE5EUA audio level = 197(72/69)    ___|||___
Audio input level is too high.  Reduce so most stations are around 50.
[0.4] KE5EUA>KE5EUA-4:(RR cmd, n(r)=3, p=0)

KE5EUA audio level = 200(74/69)    __||||___
Audio input level is too high.  Reduce so most stations are around 50.
[0.3] KE5EUA>KE5EUA-4:(I cmd, n(s)=0, n(r)=3, p=0, pid=0xf0)zork
[0L] KE5EUA-4>KE5EUA:(RR res, n(r)=1, f=0)
[0L] KE5EUA-4>BEACON:KE5EUA-4 Linux Node http://digipi.org/

KE5EUA audio level = 193(71/66)    _|||||___
Audio input level is too high.  Reduce so most stations are around 50.
[0.3] KE5EUA>KE5EUA-4:(RR cmd, n(r)=3, p=0)

KE5EUA audio level = 195(71/67)    _|||||___
Audio input level is too high.  Reduce so most stations are around 50.
[0.3] KE5EUA>KE5EUA-4:(I cmd, n(s)=1, n(r)=3, p=0, pid=0xf0)home
[0L] KE5EUA-4>KE5EUA:(RR res, n(r)=2, f=0)

KE5EUA audio level = 199(73/69)    ___|||___
Audio input level is too high.  Reduce so most stations are around 50.
[0.4] KE5EUA>KE5EUA-4:(RR cmd, n(r)=3, p=0)

KE5EUA audio level = 196(72/68)    ___||||__
Audio input level is too high.  Reduce so most stations are around 50.
[0.4] KE5EUA>KE5EUA-4:(I cmd, n(s)=2, n(r)=3, p=0, pid=0xf0)nodes
[0L] KE5EUA-4>KE5EUA:(RR res, n(r)=3, f=0)

KE5EUA audio level = 199(74/68)    ___|||___
Audio input level is too high.  Reduce so most stations are around 50.
[0.4] KE5EUA>KE5EUA-4:(I cmd, n(s)=3, n(r)=3, p=0, pid=0xf0)NODES
[0L] KE5EUA-4>KE5EUA:(RR res, n(r)=4, f=0)

KE5EUA audio level = 200(74/70)    ____|||__
Audio input level is too high.  Reduce so most stations are around 50.
[0.5] KE5EUA>KE5EUA-4:(RR cmd, n(r)=3, p=0)

KE5EUA audio level = 196(73/67)    ___|||___
Audio input level is too high.  Reduce so most stations are around 50.
[0.4] KE5EUA>KE5EUA-4:(I cmd, n(s)=4, n(r)=3, p=0, pid=0xf0)?
[0L] KE5EUA-4>KE5EUA:(RR res, n(r)=5, f=0)

KE5EUA audio level = 199(73/68)    _|||||___
Audio input level is too high.  Reduce so most stations are around 50.
[0.3] KE5EUA>KE5EUA-4:(RR cmd, n(r)=3, p=0)

KE5EUA audio level = 196(71/65)    __|||||__
Audio input level is too high.  Reduce so most stations are around 50.
[0.4] KE5EUA>KE5EUA-4:(DISC cmd, p=1)
[0L] KE5EUA-4>KE5EUA:(UA res, f=1)
 

Thank you,

Michael

KE5EUA

 

[Michael Hopwood]

So shortly after posting this the pi went into a boot loop. Upgraded to 2.0-1 and configured everything properly. Fingers crossed.

Thanks,

Michael

KE5EUA

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/2d74e8d1-32ab-4c3d-a5b0-984986853e76n%40googlegroups.com.

--

Michael D. Hopwood JR SGT USARMY RET (US) KE5EUA / WRJV225 --... ...-- ;IGY6