Setting the Path in WebChat for a specific digipeater

[Chris Hoffman]

Is there a way to specify a specific path for the APRS message.

I want to direct it to a specific digipeater by call sign, not a generic Wide 1-1

I want to determine if I can reach a specific digipeater and if that digipeater can reach a second digipeater.  

For example...

WA2SEM>KM6LYW,Digi1,Digi2:Hello

Thank you

Chris

WA2SEM

[Craig]

Hi Chris,

That's a good question, you should be able to edit the list of digi's.

The easiest way to do a test right now is to edit /home/pi/.config/aprsd/aprsd.conf and
edit the Default path,


[kiss_tcp]
 
# The APRS path to use for wide area coverage. (list value)
path = WIDE1-1,WIDE2-1

(and press [save configuration] when done so it's there on next reboot)


if it helps,
-craig
KM6LYW

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/d7b6ac14-9957-4429-935a-b606850d2b89n%40googlegroups.com.