New flash with aioc

[Don Porter]

Good day! 

I have a new flash using the AIOC - Light is green and getting the following:

Reading config file /run/direwolf.node.conf
Could not extract card number or name from default
Can't automatically find matching HID for PTT.
Audio device for both receive and transmit: default  (channel 0)
ALSA lib confmisc.c:855:(parse_card) cannot find card '0'
ALSA lib conf.c:5205:(_snd_config_evaluate) function snd_func_card_inum returned error: No such file or directory
ALSA lib confmisc.c:422:(snd_func_concat) error evaluating strings
ALSA lib conf.c:5205:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1342:(snd_func_refer) error evaluating name
ALSA lib conf.c:5205:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5728:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2722:(snd_pcm_open_noupdate) Unknown PCM default
Could not open audio device default for input
No such file or directory
Pointless to continue without audio device.

---------------------------------------------------------------------

After I click the Audio link: ALSA lib confmisc.c:855:(parse_card) cannot find card '0'

ALSA lib conf.c:5205:(_snd_config_evaluate) function snd_func_card_inum returned error: No such file or directory
ALSA lib confmisc.c:422:(snd_func_concat) error evaluating strings
ALSA lib conf.c:5205:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1342:(snd_func_refer) error evaluating name
ALSA lib conf.c:5205:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5728:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib control.c:1575:(snd_ctl_open_noupdate) Invalid CTL default
cannot open mixer: No such file or directory

----------------------------------------------------------------------------

NEWRIGNUMBER=CM108
NEWDEVICEFILE=hidraw0

----------------------------------------------------------------------------

# node 1200baud packet direwolf config

# optionally change your call to a node name here and in CDIGIPEAT below
MYCALL W9JUN-4

CBEACON  dest=BEACON delay=00:30 every=30:00 symbol="winlink" info="W9JUN-4 Linux Node http://digipi.org/"

CDIGIPEAT 0 0 W9JUN-4

DCD GPIOD /dev/gpiochip0 16

# direwolf.tnc.sh will modify and uncomment one of these and copy to /run/direwolf*conf.
# Add PTT line BELOW these to override.  DO NOT edit the following PTT lines, or uncomment
# them.
#PTT GPIOD /dev/gpiochip0 12
#PTT RIG RIGNUMBER DEVICEFILE
#PTT /dev/DEVICEFILE RTS
#PTT /dev/DEVICEFILE DTR
#PTT CM108 DEVICEFILE


DWAIT 0
TXDELAY 30
TXTAIL 10
AGWPORT 8000
KISSPORT 8001

[Don Porter]

Raspberry Pi Zero 2 W Rev 1.0

---

Radio / GPS

--- no serial devices ---

---

Audio Interface

--- no soundcards ---

[Craig]

Hi Don, the audio interface for the AIOC is no longer seen by the Pi.  This could
be for a few reasons,

bad usb cable
rf on the usb cable
rapidly replugging usb cable
dead aioc
dead usb port on pi


i'd do a cold boot first, then look at the cable, and also ensure ferrites on the cable and
antenna is not broadside to your setup.


-craig
KM6LYW

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/75b5176d-dfcb-41cf-9ccf-e57b7ab61f10n%40googlegroups.com.

[Don Porter]

Progress -

Using the client to connect to the server... The connection to wl2k doesn't complete, and PAT attempts to connect to -10

W9JUN audio level = 69(5/3)    _||||||__
[0.3] W9JUN>W9JUN-10:(SABM cmd, p=1)
[0L] W9JUN-10>W9JUN:(UA res, f=1)
[0L] W9JUN-10>W9JUN:(I cmd, n(s)=0, n(r)=0, p=1, pid=0xf0)Trying ec2-3-228-248-144.compute-1.amazonaws.com<0x0d>

[Craig]

Hi Don,

I'll need more context here.  Do you have two digipi's?  one running pat, the other running Winlink Server?

Additionally, using two DigiPi's with the same base callsign can be problematic as they both
use the same AX.25 address.  If you route through a third party (digipeater) it works.

-craig
KM6LYW

To view this discussion visit https://groups.google.com/d/msgid/digipi/c8e21e82-16a0-4b38-baa4-b3833ddca1b0n%40googlegroups.com.

[Don Porter]

My resolv.conf was missing nameservers -