Adding GPS Dongle

35 views
Skip to first unread message

Chris Hoffman

unread,
Nov 2, 2026, 10:11:29 PMNov 2
to DigiPi
When I flashed the DigiPi Beta and initialized,  I did not specify a GPS dongle.

I now want to add a GPS dongle (U-blox7)

How do I do that without relfashing and starting over from scratch?

Craig

unread,
Nov 3, 2026, 10:28:00 AMNov 3
to Chris Hoffman, DigiPi
click SysInfo with the GPS plugged in, take note of the device file name (ttyUSB0 or ttyACM0 probably)
then edit /etc/default/gpsd .   ublox works great.
--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/aef085a9-2da5-4c16-8243-f2edb1db2590n%40googlegroups.com.

Scott Currie

unread,
Nov 3, 2026, 2:40:27 PMNov 3
to DigiPi
Along these lines, others might be interested in a couple changes I made. I have DigiPi's installed in two of our ARES comms trailers where they provide APRS services (mostly for public service events) and RMS gateway service on 2M packet. Both trailers have Starlink for Internet, so the gateway service provides stations in remote areas or otherwise without Internet to send messages.

I have a U-blox7 GPS unit installed on both trailers, and I wanted the DigiPi to update its i-gate and RMS gateway locations automatically when the trailers are moved to different locations. I also wanted the GPS data to be available on the trailer LAN so Winlink Express users could update their location automatically from the DigiPi.  The i-gate was easy, just add the gpsd line to whichever Direwolf config I planned to use (copy from the tracker config). The other changes took more work. I made sure to document the changes so I didn't have to reinvent the solution in the future. I'll attach the documents here.

-Scott, NS7C
DigiPi_GPSD_NMEA_LAN_Setup_Guide.pdf
DigiPi_GPS_to_RMS_Grid_Auto_Update_Guide.pdf
Reply all
Reply to author
Forward
0 new messages