Pat ConfFile

[Sanjeev Taran]

Hello,

Looking for help from this esteemed group. I am trying to use pat with direwolf and want to use the kiss packets over port 8001 instead of the serial interface that uses hard-wired ax.25 network method. Can someone please share the pat.config file that does the bindings. Also, I assume you don't need axports setup with this configuration? Please advise. Thanks.

[Craig]

Hi Sanjeev, I'd ask this on the Pat forum for sure - great group of people there.

https://groups.google.com/g/pat-users

DigiPi configures pat to use ax25/axports via the Linux kernel, which, in turn
uses direwolf/kissattach for modulation.


if it helps,
-craig
KM6LYW

On 7/29/26 07:50, Sanjeev Taran wrote:

Hello,

Looking for help from this esteemed group. I am trying to use pat with direwolf and want to use the kiss packets over port 8001 instead of the serial interface that uses hard-wired ax.25 network method. Can someone please share the pat.config file that does the bindings. Also, I assume you don't need axports setup with this configuration? Please advise. Thanks.

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/50c5adba-c93f-433f-a645-2cd601d4a9dbn%40googlegroups.com.

[Sanjeev Taran]

Thanks. I will post here if I find a solution.

-Sanjeev