This is not a valid AX.25 frame

[Peter Busha WA1PB]

What can this error be a result of and is it something I need to fix?

WA1PB-7 audio level = 86(19/17)    _|_______
[0.1] WA1PB-7>APAT81-7,WIDE1-1,WIDE2-12,-2::WA1PB-7  :TEST11
Station address, in position 4, is empty!  This is not a valid AX.25 frame.
Station address, in position 4, is empty!  This is not a valid AX.25 frame.
Station address, in position 4, is empty!  This is not a valid AX.25 frame.
Station address, in position 4, is empty!  This is not a valid AX.25 frame.
Station address, in position 4, is empty!  This is not a valid AX.25 frame.

WA1PB-7 audio level = 90(18/16)    ||_______
[0.0] WA1PB-7>APAT81-7,WIDE1-1,WIDE2-12,-2::WA1PB    :HEO
Station address, in position 4, is empty!  This is not a valid AX.25 frame.
Station address, in position 4, is empty!  This is not a valid AX.25 frame.
Station address, in position 4, is empty!  This is not a valid AX.25 frame.
Station address, in position 4, is empty!  This is not a valid AX.25 frame.
[ig] WA1PB-2>APDW18:!R8;Ti<,m'&  ! DigiPi http://digipi.org/

Thanks,

Peter -WA1PB

[Craig]

What type of station is WA1PB-7?  DigiPi doesn't use a -7 SSID for anything.

the third route doesn't have a callsign (I added the question marks below),
if it's direwolf, the digipeat line is misconfigured.

[0.1] WA1PB-7>APAT81-7,WIDE1-1,WIDE2-12,?????-2::WA1PB-7  :TEST11

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/9f9d362a-e112-42d0-9126-90bd7ace90f0n%40googlegroups.com.

[Peter Busha WA1PB]

Ok, WA1PB-7 is my Anytone 878uv II plus that I sent the sms message from. So it must be a configuration issue with my HT.

I was trying to send messages back and forth between webchat on my digipi and my Anytone HT.

Peter

[Craig]

I wouldn't worry about it too much.

Ideally, if you're in a populated area the digipath on your anytone should be "WIDE1-1"
possibly "WIDE1-1,WIDE2-1", if you need more reliability.  it dictates the number
of repeats your packet gets before it dies.

cool,
-craig
KM6LYW

To view this discussion visit https://groups.google.com/d/msgid/digipi/fbfc05a3-072e-47e7-bdf8-b520a99ac138n%40googlegroups.com.