DigiPi 2.3-Beta2 Released

84 views
Skip to first unread message

KM6LYW Radio

unread,
Nov 3, 2026, 3:05:18 PMNov 3
to DigiPi
https://digipi.org            DigiPi 2.3-Beta2 Released

Changelog for 2.3-Beta2
  • Fix ardop.sh ardopcf startup service
  • Implement GPIO ptt in hamlib library, xara now works with DRA-Zero, GPIO12
  • Initialize properly configures rigctld for GPIO pin12 PTT
  • Default hotspot to 5G wifi, use 2.4G on Zero2W with alternate parameters
  • Default to US region code for wifi (edit /boot/firmware/cmdline.txt)
  • Upgrade Pat to 1.0.1
  • Add experimental modem73.node.sh, starts AX25 and IP over AX25 with modem73
  • Add WPA3 wifi defensive parameters, downgrade wpa_supplicant

Changelog for 2.3-Beta1
  • Add XaraFM, XaraHF - Fully VARA-compatible modems
  • Add Modem73 - OFDM/Robust/MFSK modem
  • Migrate ARDOP to ARDOPCF
  • Web interfaces for Xara, Ardop, Mercury, Modem73
  • PHP Patch, apt upgrade, Linux 6.18.50
  • Tested on ic705/hamlib and AIOC

Testers wanted!  Thank you for your continued support,
-craig
KM6LYW

John DeMan

unread,
Nov 4, 2026, 6:39:18 AMNov 4
to KM6LYW Radio, DigiPi
So, for the Pi Zero 2W...

Default hotspot to 5G wifi, use 2.4G on Zero2W with alternate parameters

Before I upgrade can you confirm the experience for a Pi Zero 2W?

What alternate parameters will I need to use/set up?


--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/bdc22d18-8b2f-4b89-93e8-460c28c3b9b8n%40googlegroups.com.

Craig

unread,
Nov 4, 2026, 10:44:05 AMNov 4
to John DeMan, DigiPi
Hi John,

The Zero2W only supports 2.4Ghz wifi, so i detect that model and
enable that speed at boot time in hotspot mode.   All other Pi's
will become 5G hotspots now, that's the change.   The experience
wont change on the Zero2W, but I must admit, it's highly prone
to interference in hotspot mode.  It's fine on the summit, but not
in a noisy environment.  In client mode it's solid (your router has
much better antennas).   I test on the 3B+ and the Zero2W.

Secondly, I highly suggest using a separate SD card for upgrades
so you can instantly switch back if there's a glitch (and after letting
me know of course).

cool,
-craig
KM6LYW

Scott Sheppard

unread,
Nov 4, 2026, 10:59:40 AMNov 4
to John DeMan, KM6LYW Radio, DigiPi
I have silly question and I am sending it out to all of us potential testers. 

I have a Pi 3B+ with a LOT of added on code and adjustments for weewx, ina226, RTC and so on. 

Is there a way to “upgrade” the image that is beta to this mess without killing what I have so carefully built?

I assume others are in a similar boat. 

Thanks

Scott Sheppard
1702 Frazier Park Drive 
Decatur, GA 30033
KJ4ZZB Call Sign

Craig

unread,
Nov 4, 2026, 11:24:58 AMNov 4
to Scott Sheppard, John DeMan, DigiPi
there's really no upgrade-in-place process yet, that'd involve significant
engineering and add non-determinism (imho).

I suggest backing up and restoring, folders:  local, config, fldigi
and  possibly any edits you made in /etc/ax25/ and /etc/rmsgw/ .

I use rsync to backup, if that helps,

rsync -avH pi@digipi7:/home/pi/local .
rsync -avH pi@digipi7:/home/pi/config .
rsync -avH pi@digipi7:/home/pi/fldigi .

Then reverse the streams to restore after flash.


cool,
-craig
KM6LYW

KM6LYW Radio

unread,
Nov 4, 2026, 2:57:57 PMNov 4
to DigiPi
fyi AIOC cable operators,

Xara wont work with a stock AIOC cable unless you reflash it and make it look like a CM108 device.  
This is because hamlib/rigctld wont drive an AIOC unless it sees a USB device ID it likes, and it
only likes the the CM108 ID.   Direwolf doesn't make this check, so nobody noticed or cared
until now.

You can flash/convert the AIOC into a cm108 with this process (or similar),


or wait for the next release of DigiPi which will incorporate this patch to hamlib,



that is all,
-craig
KM6LYW

KM6LYW Radio

unread,
Nov 5, 2026, 10:34:26 AMNov 5
to DigiPi
Hi guys, DigiPi 2.3-Beta2 Re-released with a rigctld fix.      https://digipi.org/

/etc/systemd/system/rigctld.services is misconfigured on the last beta causing
xara, mercury, nor pat to not PTT or change frequencies.

I'm re-releasing beta2 on Thu Nov  5 07:23:56 AM PST 2026.

      digipi-2.3-BETA2-110526.zip   (bugged version is digipi-2.3-BETA2-110326-2.zip)

Thanks for your continued testing and support!  (thanks to Bill for finding this bug)

best,
-craig
KM6LYW
Reply all
Reply to author
Forward
0 new messages