Help with audio settings.

[Rocco Conte]

Happy New Year Everyone,

 I was hoping someone could help me out here. I have my DigiPi set up with my IC-9700. I seem to have most things working but I have two issues I need help with please. 

I have no TX when using AX25 modes. The RX is fine. I was wondering which file contains the sound card setup for Direwolf? I suspect I may need to edit that file. I thought I saw something about that somewhere but I just can't seem to find it.

 The other issue is with the SSTV program. When I set it up (using the same settings as WSJTX which works) it just keys the transmitter. The RX seems ok.

Thanks in advance for your help.

73,

Rocco - WU2M

ARRL NNY Section Manager

Hams Over IP # 102707

DMR ID's 3130305 & 3130834

ARRL - The national association for Amateur Radio™

[Craig]

Hi Rocco,

ic9700, you can edit localize.env and set your RIG to 3081, but this should
already be set if you set that during the Initialize process.  Click PktLog
to get an idea what's going on in ax25/packet modes.

SSTV uses rigctld for rig control now, that's configured in /etc/systemd/system/rigctld.service,
again, we should see rig 3081 defined there.

I'm guessing the Initialize values were incorrect, should be [USB Connected Radio], 3081.


if it helps,
-craig
KM6LYW

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/CAB_ZMzQa1vzc-PNFczYoVx2xi0%2B8WCOySWW-hmQ_fPJj9WKXSg%40mail.gmail.com.

[Rocco Conte]

Thank You Craig! I will check those settings.

I am pretty sure that is how I have it set up but I could have made a mistake.

73,

Rocco - WU2M