No AX.25 ports configured

[David Thompson]

DigiPi 1.9-3

Raspberry Pi 3B+

DigiPi Hat ( elekitsorparts.com)

Baofeng UV-82+

I have had APRS TNC, APRS Tracker, and WebChat working. I have never been able to get Pat WinLink Email Client to connect. 

I have seen the previous suggestions to start AX.25 Node Network first, then Pat, however every combination I try simply tells me:

RigCtl Radio ready

Unable to establish connection to remote: No AX.25 ports configured

Perhaps my combination of equipment is unworkable, however before I give up, are there any other suggestions?

David VA3XDT

[Craig]

Hi David,

Click "PktLog" then turn on AX.25 Node, it should show you what's going on.

you can also click "SysLog" for an even bigger picture.

Paste output here, and we'll get'r fixed.

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/df078111-6bf1-4b9c-bbf7-9d31d6c9cfbcn%40googlegroups.com.

[David Thompson]

Pktlog:

Reading config file /run/direwolf.node.conf
Audio device for both receive and transmit: default  (channel 0)
ALSA lib pcm.c:2666:(snd_pcm_open_noupdate) Unknown PCM input
Could not open audio device default for input
No such file or directory
Pointless to continue without audio device.

Syslog:

2025-10-05T19:30:30.092081+01:00 digipi direwolf.node.sh[7943]: ++ sudo killall kissattach
2025-10-05T19:30:30.109960+01:00 digipi direwolf.node.sh[8150]: kissattach: no process found
2025-10-05T19:30:30.111664+01:00 digipi direwolf.node.sh[7943]: ++ sudo killall ax25d
2025-10-05T19:30:30.133994+01:00 digipi direwolf.node.sh[8152]: ax25d: no process found
2025-10-05T19:30:30.135588+01:00 digipi direwolf.node.sh[7943]: ++ sudo killall -9 direwatch.py
2025-10-05T19:30:30.154145+01:00 digipi direwolf.node.sh[8154]: direwatch.py: no process found
2025-10-05T19:30:30.155484+01:00 digipi direwolf.node.sh[7943]: ++ exit 0
2025-10-05T19:30:30.156546+01:00 digipi systemd[1]: node.service: Deactivated successfully.
2025-10-05T19:30:30.156908+01:00 digipi systemd[1]: Stopped node.service - node.
2025-10-05T19:30:30.157590+01:00 digipi systemd[1]: node.service: Consumed 1.676s CPU time.
2025-10-05T19:30:41.777958+01:00 digipi systemd[1]: Starting node.service - node...
2025-10-05T19:30:42.062746+01:00 digipi systemd[1]: Started node.service - node.
2025-10-05T19:30:42.071518+01:00 digipi direwolf.node.sh[8232]: + trap ctrl_c INT
2025-10-05T19:30:42.071774+01:00 digipi direwolf.node.sh[8232]: + trap ctrl_c TERM
2025-10-05T19:30:42.071926+01:00 digipi direwolf.node.sh[8232]: + sudo killall kissattach
2025-10-05T19:30:42.090996+01:00 digipi direwolf.node.sh[8234]: kissattach: no process found
2025-10-05T19:30:42.093540+01:00 digipi direwolf.node.sh[8232]: + truncate --size 0 /run/direwolf.log
2025-10-05T19:30:42.096203+01:00 digipi direwolf.node.sh[8232]: + grep -i usb /proc/asound/cards
2025-10-05T19:30:42.100009+01:00 digipi direwolf.node.sh[8232]: + '[' 0 -eq 0 ']'
2025-10-05T19:30:42.101702+01:00 digipi direwolf.node.sh[8238]: ++ grep -i usb /proc/asound/cards
2025-10-05T19:30:42.102995+01:00 digipi direwolf.node.sh[8239]: ++ head -1
2025-10-05T19:30:42.104119+01:00 digipi direwolf.node.sh[8240]: ++ cut -c 2-2
2025-10-05T19:30:42.106756+01:00 digipi direwolf.node.sh[8232]: + export ALSA_CARD=0
2025-10-05T19:30:42.107253+01:00 digipi direwolf.node.sh[8232]: + ALSA_CARD=0
2025-10-05T19:30:42.107624+01:00 digipi direwolf.node.sh[8232]: + echo 'ALSA_CARD:  0'
2025-10-05T19:30:42.107946+01:00 digipi direwolf.node.sh[8232]: ALSA_CARD:  0
2025-10-05T19:30:42.108264+01:00 digipi direwolf.node.sh[8232]: + cp /home/pi/direwolf.node.conf /tmp/direwolf.node.conf
2025-10-05T19:30:42.113472+01:00 digipi direwolf.node.sh[8243]: ++ grep USB /proc/asound/cards
2025-10-05T19:30:42.114569+01:00 digipi direwolf.node.sh[8244]: ++ wc -l
2025-10-05T19:30:42.116580+01:00 digipi direwolf.node.sh[8232]: + USBPRESENT=2
2025-10-05T19:30:42.117113+01:00 digipi direwolf.node.sh[8232]: + source /dev/fd/63
2025-10-05T19:30:42.118007+01:00 digipi direwolf.node.sh[8245]: ++ head -n 25 localize.env
2025-10-05T19:30:42.119360+01:00 digipi direwolf.node.sh[8232]: ++ NEWCALL=VA3XDT
2025-10-05T19:30:42.119569+01:00 digipi direwolf.node.sh[8232]: ++ XXXXXXXXXXX
2025-10-05T19:30:42.119677+01:00 digipi direwolf.node.sh[8232]: ++ XXXXXXXXXX
2025-10-05T19:30:42.119759+01:00 digipi direwolf.node.sh[8232]: ++ NEWGRID=FN04fn
2025-10-05T19:30:42.119857+01:00 digipi direwolf.node.sh[8232]: ++ NEWLAT=44.58227
2025-10-05T19:30:42.119937+01:00 digipi direwolf.node.sh[8232]: ++ NEWLON=-79.58154
2025-10-05T19:30:42.120015+01:00 digipi direwolf.node.sh[8232]: ++ NEWGPS=ttyACM0
2025-10-05T19:30:42.120119+01:00 digipi direwolf.node.sh[8232]: ++ NEWNODEPASS=abc123
2025-10-05T19:30:42.120197+01:00 digipi direwolf.node.sh[8232]: ++ NEWDISPLAYTYPE=st7789
2025-10-05T19:30:42.120274+01:00 digipi direwolf.node.sh[8232]: ++ NEWRIGNUMBER=DTR
2025-10-05T19:30:42.120350+01:00 digipi direwolf.node.sh[8232]: ++ NEWDEVICEFILE=ttyUSB0
2025-10-05T19:30:42.120430+01:00 digipi direwolf.node.sh[8232]: ++ NEWBAUDRATE=115200
2025-10-05T19:30:42.120510+01:00 digipi direwolf.node.sh[8232]: ++ NEWBIGVNC=
2025-10-05T19:30:42.120588+01:00 digipi direwolf.node.sh[8232]: ++ NEWFLRIG=1
2025-10-05T19:30:42.120666+01:00 digipi direwolf.node.sh[8232]: ++ NEWI2CAUDIO=fepi
2025-10-05T19:30:42.120759+01:00 digipi direwolf.node.sh[8232]: + '[' DTR = DTR ']'
2025-10-05T19:30:42.120887+01:00 digipi direwolf.node.sh[8232]: + sed -i 's/\#PTT \/dev\/DEVICEFILE DTR/PTT \/dev\/ttyUSB0 DTR/gi' /tmp/direwolf.node.conf
2025-10-05T19:30:42.124529+01:00 digipi direwolf.node.sh[8232]: + sudo mv /tmp/direwolf.node.conf /run/direwolf.node.conf
2025-10-05T19:30:42.141669+01:00 digipi direwolf.node.sh[8249]: + direwolf -d t -d o -p -q d -t 0 -c /run/direwolf.node.conf
2025-10-05T19:30:42.141949+01:00 digipi direwolf.node.sh[8232]: + sleep 5
2025-10-05T19:30:42.143178+01:00 digipi direwolf.node.sh[8250]: + grep --line-buffered -v PTT_METHOD
2025-10-05T19:30:42.144546+01:00 digipi direwolf.node.sh[8251]: + sudo /home/pi/direwatch.py --save /run/direwatch.png --log /run/direwolf.log --title_text 'ax25 Node' --display st7789
2025-10-05T19:30:47.146334+01:00 digipi direwolf.node.sh[8232]: + sudo modprobe netrom
2025-10-05T19:30:47.176444+01:00 digipi direwolf.node.sh[8329]: ++ ifconfig
2025-10-05T19:30:47.177553+01:00 digipi direwolf.node.sh[8331]: ++ wc -l
2025-10-05T19:30:47.178817+01:00 digipi direwolf.node.sh[8330]: ++ grep nr0
2025-10-05T19:30:47.181067+01:00 digipi direwolf.node.sh[8232]: + nrdevice=1
2025-10-05T19:30:47.181913+01:00 digipi direwolf.node.sh[8232]: + '[' 1 -eq 0 ']'
2025-10-05T19:30:47.182719+01:00 digipi direwolf.node.sh[8232]: + '[' -n '' ']'
2025-10-05T19:30:47.184017+01:00 digipi direwolf.node.sh[8333]: ++ ls -l /tmp/kisstnc
2025-10-05T19:30:47.185370+01:00 digipi direwolf.node.sh[8334]: ++ awk '{ print $11 }'
2025-10-05T19:30:47.186192+01:00 digipi direwolf.node.sh[8333]: ls: cannot access '/tmp/kisstnc': No such file or directory
2025-10-05T19:30:47.186990+01:00 digipi direwolf.node.sh[8232]: + sudo kissattach radio
2025-10-05T19:30:47.199150+01:00 digipi direwolf.node.sh[8336]: usage: kissattach [-b] [-l] [-m mtu] [-v] tty port [inetaddr]
2025-10-05T19:30:47.200858+01:00 digipi direwolf.node.sh[8232]: + sudo kissparms -c 1 -p radio
2025-10-05T19:30:47.213923+01:00 digipi direwolf.node.sh[8338]: kissparms: no AX.25 ports configured
2025-10-05T19:30:47.215499+01:00 digipi direwolf.node.sh[8232]: + sudo ax25d
2025-10-05T19:30:47.229224+01:00 digipi direwolf.node.sh[8340]: ax25d: no AX.25 port data configured
2025-10-05T19:30:47.230976+01:00 digipi direwolf.node.sh[8232]: + sudo /etc/ax25/nodebackup.sh
2025-10-05T19:30:47.241659+01:00 digipi direwolf.node.sh[8341]: sudo: /etc/ax25/nodebackup.sh: command not found
2025-10-05T19:30:47.242288+01:00 digipi direwolf.node.sh[8232]: + sudo /usr/sbin/netromd
2025-10-05T19:30:47.254701+01:00 digipi direwolf.node.sh[8343]: netromd: no AX.25 ports defined
2025-10-05T19:30:47.256357+01:00 digipi direwolf.node.sh[8232]: + sudo route del -net 44.0.0.0 netmask 255.0.0.0
2025-10-05T19:30:47.270302+01:00 digipi direwolf.node.sh[8345]: SIOCDELRT: No such process
2025-10-05T19:30:47.272262+01:00 digipi direwolf.node.sh[8232]: + sudo /usr/sbin/mheardd
2025-10-05T19:30:47.286817+01:00 digipi direwolf.node.sh[8347]: mheardd: no AX.25 port data configured
2025-10-05T19:30:47.288762+01:00 digipi direwolf.node.sh[8232]: + true
2025-10-05T19:30:47.289446+01:00 digipi direwolf.node.sh[8232]: + '[' -n '' ']'
2025-10-05T19:30:47.289857+01:00 digipi direwolf.node.sh[8232]: + sleep 1200

Craig, just relized I have Rig # set for my Yaesu FT-710 - Is that the issue? What should it be for the Baofeng?

David

***********