Trouble with Mercury HF Modem

[Jeremy Pierce]

Running a Kenwood TS-2000 with a Digirig mobile interface.  Selected that on initialize.  Upon selection of Mercury HF modem, I see the selection come up on my digipi screen then it kicks back to standby.  I'm getting the following in my Syslog.  Perhaps someone has a fix? Thanks

KM6QAQ

73

Sep 16 04:14:13 digipi systemd[1]: logrotate.service: Deactivated successfully.

Sep 16 04:14:13 digipi systemd[1]: Finished logrotate.service - Rotate log files.

Sep 16 04:15:43 digipi systemd[1]: Starting mercury.service - mercury - MERCURY softmodem for pi...

Sep 16 04:15:44 digipi systemd[1]: Started mercury.service - mercury - MERCURY softmodem for pi.

Sep 16 04:15:46 digipi mercury.sh[892]: Error: -S (HERMES SHM) and -A (HAMLIB device) are mutually exclusive.

Sep 16 04:15:46 digipi mercury.sh[892]: Rhizomatica Mercury Version 1.9.12 (git 2f06feff)

Sep 16 04:15:46 digipi mercury.sh[892]: Loaded configuration from mercury.ini

Sep 16 04:15:46 digipi systemd[1]: mercury.service: Main process exited, code=exited, status=1/FAILURE

Sep 16 04:15:46 digipi systemd[1]: mercury.service: Failed with result 'exit-code'.

Sep 16 04:15:46 digipi systemd[1]: mercury.service: Consumed 1.540s CPU time.

[Craig]

digipi/hermes doesn't initialize with a GPIO rig

you can edit config/mercury/mercury.ini.template  and change the
rig number to "2" then edit /etc/systemd/system/rigctld.service, make
sure it works with gpio 12, then add "sudo systemctl start rigctld"
to mercury.sh.

that's a lot of info  -- I'm curious, what rig are you using that uses
GPIO (or non hamlib) to PTT?

-craig
KM6LYW

--
You received this message because you are subscribed to the Google Groups "DigiPi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to digipi+un...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/digipi/284651686.251059.1789528756097%40mail.yahoo.com.