Identify this Powerfab tracked digger?

[Nginmu Mbetse]

Could anyone tell me what model Powerfab this is? Just bought it as a project. Thanks.

[Carl]

Hi,

Looks like a 1700x with the cab removed. https://www.oilyhands.co.uk/images/Powerfab_Julian/Powerfab%201700X%20brochure.pdf

Cheers,

Carl

On Mon, 15 Aug 2022 at 00:55, Nginmu Mbetse <ngi...@gmail.com> wrote:

Could anyone tell me what model Powerfab this is? Just bought it as a project. Thanks.

--
You received this message because you are subscribed to the Google Groups "diggers-dumpers-plant" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diggers-dumpers-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/diggers-dumpers-plant/20d804ec-e8af-40ca-96b1-f27d4e9c00abn%40googlegroups.com.

[Duncan Mitchell]

Looks like a 1200 xd

 

From: diggers-du...@googlegroups.com <diggers-du...@googlegroups.com> On Behalf Of Nginmu Mbetse
Sent: 14 August 2022 21:35
To: diggers-dumpers-plant <diggers-du...@googlegroups.com>
Subject: Identify this Powerfab tracked digger?

 

Could anyone tell me what model Powerfab this is? Just bought it as a project. Thanks.

 

[Joe Stehly]

Good morning/afternoon,

I have sure enjoyed the helpful replies going back and forth as the digger members ask questions, etc. Good to share the information.

I have a Lifton LE-125. Purchased it a few years ago and have used it a couple times. 

Ok, I do need some advice as well.  On my Lifton, there are two hydraulic valves on each side of the seat. I do believe they have a part in lowering and raising the stabilizing feet. Does anyone know which combination of switch positions work?? I've tried over and over and not very consistent success.  Any suggestions/troubleshooting would be most appreciated.  Joe, in Virginia, USA.  Thanks!!

To view this discussion on the web visit https://groups.google.com/d/msgid/diggers-dumpers-plant/DB4P191MB21688AF9BE6960E5607560E8E2689%40DB4P191MB2168.EURP191.PROD.OUTLOOK.COM.

[Nginmu Mbetse]

Thanks guys re:1200x / 1700x, I saw a 1250xd which looked identical except it had a 2 cylinder Mitsubishi engine. Guy on a welding forum's done a beautiful job of it. My engine is a 1 cyl petrol job with a big sticker that says 'Stockport Generators' or somesuch so I'm not sure if my machine has had a different engine fitted at some point, or if it's some kind of low budget option like a 1000xd or 700xd or something (I'm guessing them numbers there). It starts runs and digs well, I'd like to keep it going.. so any ideas where I should grease and oil etc. beyond the obvious? Joe, welcome from one new member? to another, you can start your own thread on the Lifton LE-125.. Stay in this thread if you want doesn't bother me, but you might get more replies with a dedicated thread

[Duncan Mitchell]

looking for a replacement  boom and dipper for power fab 1200 xd

or looking for any one that has drawings or has anyone got a broken surplus arm that could be  manufactured as per sample as my one is missing

also need a offset cylinder?

any info on the machine would be greatly  received