BENFORD ME130 BUSHES

[Graham Vinnicombe]

Hi everyone

Just a Quick Question ,has anyone used "Polypipe" for the Pin Bushes  for the Dipper Arm Ram and Other Rams, also I am trying to source Bushes for the 3 Buckets, I have a  300mm, a 600mm and the Grading Bucket, Any advice would be Helpful Cheers

[David Chandler]

Hi used poly pipe on a powerfab lasted several years, but only used for own work if was for commercial use then might not be as good

I found that the solvent pipe is harder than the push fit

HTH

Dave

Sent from my iPhone

On 8 Sep 2024, at 16:26, Graham Vinnicombe <graha...@gmail.com> wrote:

Hi everyone

Just a Quick Question ,has anyone used "Polypipe" for the Pin Bushes  for the Dipper Arm Ram and Other Rams, also I am trying to source Bushes for the 3 Buckets, I have a  300mm, a 600mm and the Grading Bucket, Any advice would be Helpful Cheers

--
You received this message because you are subscribed to the Google Groups "diggers-dumpers-plant" group.
To unsubscribe from this group and stop receiving emails from it, send an email to diggers-dumpers-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/diggers-dumpers-plant/8fed5f0c-5565-4714-b1e4-39cf44276c72n%40googlegroups.com.

[Graham Vinnicombe]

Hi Dave
Many thanks for the info,I will be using my ME130 for Private Use also so I will get hold of some Polypipe and Rebush 👍👍

To view this discussion on the web visit https://groups.google.com/d/msgid/diggers-dumpers-plant/08345909-7D10-477E-AF33-1AFAA9CC3AB6%40yahoo.co.uk.

[David Chandler]

Hi again 

I made a grading ‘blade’ out of an old oxygen bottle cut top and bottom off then cut lengthways to size (depth) welded frame to fit with pins 

Lasted without any wear 

Dave

Sent from my iPhone

On 8 Sep 2024, at 18:00, David Chandler <davidch...@yahoo.co.uk> wrote:

Hi used poly pipe on a powerfab lasted several years, but only used for own work if was for commercial use then might not be as good

[Graham Vinnicombe]

That’s 😎,When I bought mine it came with 3 Buckets,the Grading bucket was the only decent one so I Repaired the other 2, I’m a Self taught Welder and they came out great,I will be uploading pics of the ongoing Restoration and use including the Bucket Repairs 

Graham 

To view this discussion on the web visit https://groups.google.com/d/msgid/diggers-dumpers-plant/69EE10F3-D289-43D0-9959-E748C68DB2F9%40yahoo.co.uk.