Citroen Programming Software
Zina Perko
These units are programmed to your vehicle and are part of your vehicles immobiliser system, making replacing it near impossible with out paying the dealership over thousands for replacement and programming.
At Gallalock we stock Citroen car keys for many different models and we are specialists in programming Citroen transponder keys, so if you have experienced problems with your key, our locksmiths can help. Transponder keys are typically found in Citroen models produced from 1995. Transponder keys contain a micro-chip which transmits a signal to the engine when you insert it into the ignition. If the signal is recognised by the car engine, it will allow you to start the car. If, however, the signal is not received by the engine, the engine will be temporarily disabled and unable to start. Therefore, if you need a new key for your Citroen, it has to be cut and programmed correctly to work with your car.
Please note: to program your new Citroen car key, we need a 4-digit pin code that is normally provided with your car when you purchase it. If you do not have the pin code, please contact your dealership and they should be able to help you to retrieve the code. Provision of the Pin Code is necessary in order to program your key.
Do you need to have a new key cut and programmed for your Citroen Berlingo? Visit us in our shop in Muswell Hill and our trained specialist will cut and programme a new key that will be fully compatible with your model of Citroen Berlingo. We can cut and code Citroen Transponder keys without a remote and Citroen 2-button remote keys for Citroen Berlingo models produced between 1999 and 2008. Our locksmiths will programme the new key for your car on our premises in Muswell Hill in north London. Use the booking calendar below to arrange an appointment.
If you need a new or a spare key for your Citroen C1, our specialists at Gallalock can help. We can cut and successfully programme a Citroen Transponder chipped key that will work with your Citroen C1. Currently, we stock keys for Citroen C1 models that were manufactured between 2004 and 2008. Come to our shop in Muswell Hill and our experienced technicians will provide you with a new key suitable for your vehicle. The new key will be cut in our shop and then programmed to your car at the back of our shop in Queens Lane in Muswell Hill.
Please use the booking calendar below to choose and book your visit.
At Gallalock we have a team of trained locksmiths who can assist you if you have had problems with your Citroen C2 car key. We supply Citroen C2 car keys for all models produced from 2000. When you visit us, first we will determine which key is suitable for your model - either a 2-button remote key or a 2-button remote flip key. Then we will be able to cut and programme it to match your Citroen C2. This service is available in our shop in Muswell Hill, north London.
Your can book your appointment through the booking calendar below.
We are trained locksmiths, specialising in programming Citroen car keys. In our offer we have car keys that can be cut and programmed to work with your Citroen C4 Picasso model produced between 2004 and 2010. Book an appointment that is convenient for you and we will prepare a Citroen 3-button remote flip key that you will be able to use with your car. During your visit in our shop in Muswell Hill, north London, our locksmiths will cut and programme your new key to make it fully functional and ready to use with your Citroen C4 Picasso.
You can arrange your visit online by clicking on the link below.
Need a new or a spare key for your Citroen C5? Our skilled technicians can help. We can supply you with a new key for any Citroen C5 model that was produced between 2001 and 2011. During your appointment one of our locksmiths will cut and electronically encode a 3-button remote flip key that will match your Citroen C5. This service is provided in our shop in Muswell Hill, north London.
Appointments can be made using our convenient calendar below.
If you require a new or a spare key for your Citroen Dispatch, Gallalock locksmiths can assist you. We provide keys that can be cut and programmed to match any model of Citroen Dispatch made from 1998. We supply chipped Citroen Transponder keys and 2-button remote flip keys that are cut and then encoded in order to work with your vehicle. Your new key will be prepared and matched to your vehicle by our highly experienced specialists in our shop in Muswell Hill, north London.
If you would like to book an appointment, please use the booking calendar.
We are skilled locksmiths with years of experience in cutting and programming Citroen car keys, so if you are experiencing problems with your Citroen Saxo car key, Gallalock specialists will be able to help. We cut and programme Citroen Transponder chipped keys that match Citroen Saxo models manufactured between 2002 and 2003. Choose a convenient date for your visit from the booking calendar below and one of our technicians will cut and code a new key for your Citroen Saxo during your appointment.
Keys are cut and encoded in our shop in Muswell Hill in north London.
Are you having troubles with your Citroen Xsara car key? Visit Gallalock and our qualified locksmiths will prepare a new key to match your vehicle. We can cut and programme Citroen 2-button remote keys that you will be able to use with your Citroen Xsara model produced between 2000 and 2003. The new key for your car will prepared and matched with your Citroen on our premises in Muswell Hill, north London.
Book an appointment with our locksmith using the link below.
Many independent technicians and repair workshops have customers who drive Peugeot, Citroen and Vauxhall vehicles. Solving problems on these vehicles is made much easier when technicians use the the official Peugeot Citroen Dealer Diagnostic System. This system can code keys, replace ECUs and control units as well as provide full workshop manual and wiring diagrams. Technicians who use DiagBox and ServiceBox fix more cars faster than those who use Snap-on, Bosch, Autel and Topdon diagnostic scan tools.
Using the Peugeot Citroen Dealer Diagnostic System requires technicians to attend a hands-on training course. The software is very powerful and can complete every function required. The software is not very easy to use and learning everything that it is possible and necessary to do should be achieved by attending a training course.
The DiagBox software is free to download from the ServiceBox website. Installing the diagnostic software is relatively straight forward. You just need to ensure that your laptop or PC meets the minimum requirements as set out on the website. You will also need to use the correct vehicle communication interface, which you can buy directly from Stellantis group to guarantee fault free use, and to be able to access the free of charge technical helpline run by Stellantis.
A short hands on course at a top quality, professional training centre, like Technical Topics in Bridgwater, Somerset will ensure that you fix more broken French cars and faster. The course will cover installation, updates, fault finding, trouble shooting, wiring diagrams, workshop manuals, software updates, key programming, ECU coding and much, much more. The course comes complete with a training manual worth over 130.
A good training course will be run by Master Technicians. It will be based in a proper training centre. There will be classroom sessions as well as workshop sessions. You will get hand-on time with a demonstration vehicle. The course will usually run for two days.
It takes seconds: compare competitive key programming & coding prices and customer reviews from local garages, Citroen car Mechanics and even Citroen dealers before taking your pick! Plus you can book in online. We also offer Citroen servicing and other common repair types.
Transponder Maker Pro Modules are software for transponder key making, transponder key programming, transponder key copying, and PIN code/ security code calculating.
A protection programmer is a small box, which has to be connected to the free USB port of a computer.
All ATEQ tools are compatible with Citroen original sensors. Many devices also program universal aftermarket sensors to be fitted in Citroen vehicles. Choose the ATEQ VT36 tool or the Q-1244-BX TPMS tool to read all Citroen sensors. To reset or to relearn the Citroen TPMS ECU, an OBDII capable tool such as the ATEQ VT56 is recommended.
The Q-1244-BX TPMS TOOL for Citroen vehicles is accessible for all Citroen dealers from PSAs own purchase platform. It includes all PSA brands (Citroen, Citroen, DS, Vauxhall and Opel). To reset the ECU on most Citroen vehicles, the Q-1244-BX is used in conjunction with the Citroen Diagnostic tool. If you are not a Citroen dealer, look for the ATEQ VT36, which is the multibrand version of the same tool. User Manuals for the Q-1244-BX Tool for CITROEN can be found here.What happens when a TPMS sensor Is faulty or damaged?REPLACING A TPMS SENSOR ON A CITROEN VEHICLE
When a Citroen TPMS sensor is broken, or does not respond anymore, it is time to replace it. Go to the Part Number Lookup menu in the ATEQ TPMS tool menu, to find the right Original Equipement spare part replacement number for Citroen. Another alternative is to programme a universal sensor. A TPMS programming tool such as the VT36, VT46 and the VT56 allows to programme over 10 brands of universal sensors. See this video about programming a senso
Citroen uses indirect TPMS on many of their cars. This basic system, uses wheel rotation monitoring and often ABS wheel speed sensor information to establish if there is a pressure issue or a puncture. It is necessary to reinitialise the system every time one or more tyre pressures are adjusted, and after changing one or more wheels. The process varies from one Citroen vehicle to the other. To quickly find the reinitialisation processes for all Citroen vehicles, even the INDIRECT, professionals can use an ATEQ VT56 TPMS tool. It contains step-by-step instructions, for all Citroen and other PSA vehicles.
c80f0f1006