Wall Access Point

[Alana Fekety]

Morethan just a wireless access point, EAP225-Wall acts as a switch and provides three standard Ethernet jacks together with a Power over Ethernet outlet, capable of powering wired devices such as IP phones, IP cameras, intercoms and more.

EAP225-Wall delivers combined dual-band speeds of up to 1200Mbps. Armed with the latest 802.11ac Wave 2 MU-MIMO technology, it can exchange data with multiple clients at the same time to allow more devices to connect without any slowdown to the network.

1 Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection, quality, and client condition.

We have updated our Policies. Read Privacy Policy and Terms of Use here.

This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy .

A range extender requires some kind of wireless because it basically repeats an existing wireless signal. An access point creates a wireless signal and connects those devices to a wired LAN. The particular device you link to has an Ethernet port, but it seems designed to connect to client devices rather than the LAN.

This Access Point TL-WA801ND 300Mbps Wireless N Access Point TP-Link United Kingdom looks like a good option because it includes the passive PoE injector. Note that passive PoE is not the same standard as 802.11af PoE so you must use the injector rather than a switch or something else that includes PoE ports.

The AC1200 Dual Band Gigabit In-Wall Access Point (AP) is an IP-COM high-performance wireless access point designed for hotel rooms, villas, large apartments, KTV compartments and other places. Compliant with IEEE 802.11ac protocol and Wave 2 standard, and featured with the MU-MIMO technology, APs of this series support a dual-band concurrent wireless speed of up to 1167 Mbps. Adoption of the standard 86 mm x 86 mm in-wall design enables that the AP can be installed in any in-wall electrical boxes of 86 mm x 86 mm and 75 mm x 75 mm. Elegant and exquisite appearance goes well with the interior decoration design of the room. With the assistance of the existing in-wall electrical box structure, the AP helps you deploy your wireless networks easily, freeing you from time-consuming networking, and effectively addressing the weak WiFi signal problem in guest rooms.

With both pure 5 GHz band with less interference and 2.4 GHz band with stronger compatibility and longer transmission distance, the AP allows 2.4 GHz and 5 GHz wireless terminals to access at the same time, ensuring more wireless clients to access. The single AP has more than three times capacity of the traditional single band AP.

With the independent RF chip, the AP separates the power supply part and WiFi signal processing part, completely avoiding the interference of the power magnetic field on the WiFi signal. Boosted by the high-performance antenna, the AP can cover two side-by-side hotel rooms with full WiFi.

The AP can be powered by the PoE devices. With an Ethernet cable, the AP can be powered and transmit data at the same time. The maximum power supply distance of up to 100 meters enables the AP to be installed easily in hotels or your houses without breaking the existing power line layout.

Install the latest technology with the next iteration of Wi-Fi AC. Wave 2 AC permits multiple users to talk to the access point simultaneously (MU-MIMO) and allows the access point to handle more communication, producing less congestion on the network and offering support for higher throughput. This feature makes the Araknis 510-Series WAP perfect for high-density networks that need to handle more wireless devices.

As part of the 802.11ac standard, chipset-based beamforming automatically directs the wireless signal toward heavily used clients, maximizing signal strength and minimizing side noise on every device.

Fast Roaming allows for a quick and seamless transition between multiple wireless access points. The location-based triangulation helps determine the closest and strongest AP, then automatically connects your device.

With Araknis and OvrC, your customers can easily manage their wireless devices. Easy-to-set up user profiles allow users to schedule and restrict Wi-Fi access as they see fit. And unlike competitors who require a separate box or third-party service, OvrC uses the native capabilities of the WAP, so you get full control and flexibility. Learn more about Wi-Fi management >>

With cloud configuration for projects with multiple access points, you can add or edit networks, manage SSIDs, and set up channel and roaming settings from the OvrC mobile or web app, eliminating hours of manual setup time.

This Araknis product has a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified, or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).

Right now, I have the Bell router as the wireless access point for the extension of the house, and the Asus RT-AC87U for the rest of the house. The Bell router has shitty wifi, so I want to deactivate its wireless access point and attached an AP to it.

I want to upgrade to wifi 6 at the same time, so I considered the ASUS AX6000 to replace the RT-AC87U and use the later for the AP of the extension, but the AX6000 is expensive, especially to be used only as an AP.

On top of that, they also mention in that thread that wifi coverage is super difficult to give a educated answer on, because everything from baby alarms, water pipes, electricity wires, wall thickness and lot lot more will affect how good the signal is on location - what works for one guy might not work for the next one

I dont know exactly what AP this is from, but this should be pretty close to how the Ubi ones spread.

Looks little like a UFO (which is kinda disc shaped) and the yellow part look bit like the beam from a UFO, as seen in cartoons.

Point being, that the wifi is pretty weak near the AP, untill you have a little distance and it really kicks in and spreads. Thats why the ceiling, or floor (like in a TV stand near the floor) is ideal for these APs

Get faster Wi-Fi connection with 802.11ac technology. With our new WAP361, you can connect more devices, wired and wirelessly; run more apps; and keep your network running efficiently, all at an affordable price. The WAP361 is an ideal solution for cost-sensitive hospitality or classroom deployments.

The WAP361 provides speed up to 1.2 Gbps to help businesses increase productivity and run next-generation applications without any degradation. The WAP361 offers a 5-port switch. One powered-device port allows the access point to power an IP device. One power-sourcing-equipment (PSE) port allows a backbone switch to power the access point.

Plug this Nuclias Connect Access Point into any Ethernet wall socket and deliver high-speed AC Wave 2 Wi-Fi on a network that you can manage remotely. Fewer wires and powerful management with guest-access make Nuclias Connect the perfect solution for any professional environment.

The DAP-2622 works with Nuclias Connect - a software-based management platform (with optional hardware controller) that can be used on-premises, or as a cloud solution hosted on a public cloud service. Admin tasks can be swiftly carried out from the Nuclias Connect app, or server/PC-based software for easy access, easy automation, and easy network scalability.

Empower admins to work efficiently & effectively with role-based options that enable delegated access across your network. You can deploy, configure, update and expand rapidly, even across multiple sites, and utilise the intuitive dashboard to keep issues to an absolute minimum.

Designed to support a network that you can count on, the DAP-2622 utilises 802.11ac Wave 2 which not only provides fast wireless speeds, but also enhances your network efficiency by prioritising traffic for an all-round smoother and uninterrupted Wi-Fi experience.

To maximise total return on investment, the DAP-2622 can be configured to optimise network performance based on any one of its multiple operation modes: access point, wireless distribution system (WDS) with access point, WDS/bridge (no AP broadcasting), and wireless client.

The DAP-2622 is equipped with two PoE ports (x1 input and x1 output), which are able to power an external device (such as an IP phone), as well as a LAN port if a wired connection is necessary.

The low-profile design, together with the lack of cable clutter allows for an easy and elegant installation over existing Ethernet sockets.

Compared to traditional hardware-based unified management systems, Nuclias Connect offers tremendous flexibility. Easy setups, remote access and an intuitive dashboard make life easier for network admins, whilst functionality and network self-healing tools such as airtime fairness, localised throttling and load-balancing improves overall user experience.

3a8082e126