TinyG motor port 4 not working
8 views
Skip to first unread message
Jian Chen
Jul 25, 2016, 4:58:14 PM7/25/16
to TinyG Development
I'm trying to use TinyG to control 4 stepper motors. But the 4th port is not working for this application. Is there something different about the fourth port? Can it be used to control a stepper motor? Any suggestions or advice would be helpful since I'm not familiar with this. Thanks a lot in advance.
Dave Hylands
Jul 25, 2016, 4:59:32 PM7/25/16
to devT...@googlegroups.com
It does work (at least for me), because I'm using it on my OX CNC Router.
It needs to be configured, and you need to set the current pot, but otherwise I didn't have to do anything special.On Mon, Jul 25, 2016 at 1:58 PM, Jian Chen <chenji...@gmail.com> wrote:
I'm trying to use TinyG to control 4 stepper motors. But the 4th port is not working for this application. Is there something different about the fourth port? Can it be used to control a stepper motor? Any suggestions or advice would be helpful since I'm not familiar with this. Thanks a lot in advance.
--
You received this message because you are subscribed to the Google Groups "TinyG Development" group.
To unsubscribe from this group and stop receiving emails from it, send an email to devTinyG+u...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Jian Chen
Jul 26, 2016, 4:13:52 PM7/26/16
to TinyG Development
Hi Dave, what kind of configuration you mentioned? Can you please give more details?
Riley Porter
Jul 26, 2016, 9:18:08 PM7/26/16
to devT...@googlegroups.com
Dave Hylands
Jul 26, 2016, 10:44:47 PM7/26/16
to devT...@googlegroups.com
My OX has an X motor, 2 Y motors, and a Z motor.
You can find my configuration here:
Reply all
Reply to author
Forward
0 new messages