DeVIDE for 3D construction from

[Suvi]

Hi

Can DeVIDE be used to construct 3D images from 2D images that are taken from different viewpoints? (not slice images)
If not, which tool do you recommend? I tried Insight3D but it wasn't as automatic as I wanted.

Suvi

[Charl Botha]

On Fri, Nov 30, 2012 at 6:20 PM, Suvi <suvi...@hotmail.com> wrote:

Can DeVIDE be used to construct 3D images from 2D images that are taken from different viewpoints? (not slice images)
If not, which tool do you recommend? I tried Insight3D but it wasn't as automatic as I wanted.

DeVIDE can't do this. It's definitely quite a hard problem. You could try Autodesk 123D Catch: http://www.123dapp.com/catch

[Jeffrey H. Brooks D.M.D.]

Team

 

I have a quick question for you all.  I really appreciate being a part of this users group and have learn a tremendous amount of information from it.

I have been using Devide to take CBCT scans and generate STLs from the DICOM.  This has worked out great for us.

I would like to be able to manipulate the STL files by cutting portions out of the 3D rendering.  Is there a free STL editor that will allow freehand “clipping” or cutting of a STL file that you guys are aware of?

 

Thanks

 

Dr. Brooks

 

Jeffrey H. Brooks D.M.D.

 

Associate Professor, Dept. of Oral and Maxillofacial Surgery

University of Tennessee School of Dentistry

--
You received this message because you are subscribed to the Google Groups "devide-users" group.
To post to this group, send email to devide...@googlegroups.com.
To unsubscribe from this group, send email to devide-users...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/devide-users?hl=en.

[James Goodhew]

If I may offer a suggestion, Meshlab may be one such program. For myself as a novice, the tools in the bar at the top initially were not self-explanatory, but after a while the differences between them and what they do became clear.

[Charl Botha]

That's a great suggestion by James, that would also have been my best guess.

Good luck,
Charl

[Jeffrey Brooks D.M.D.]

Perfect and that did exactly what I needed.

Thanks for the help!

 

Jeffrey H. Brooks

 

From: devide...@googlegroups.com [mailto:devide...@googlegroups.com] On Behalf Of James Goodhew
Sent: Friday, December 14, 2012 11:35 PM
To: devide...@googlegroups.com
Subject: Re: DeVIDE for 3D construction from

 

If I may offer a suggestion, Meshlab may be one such program. For myself as a novice, the tools in the bar at the top initially were not self-explanatory, but after a while the differences between them and what they do became clear.

--