Flash Keylogger Pro

[Vernie Montagna]

Versatile USB hardware keylogger with the Mac Compatibility Pack (MCP). Flash drive mode and 16 gigabytes of memory (industrial grade) assure quick and easy access to logged data under any operating system. Completely transparent for computer operation, no software or drivers required.

The KeyGrabber is a reliable and versatile keylogger, being a best-seller since 2005. Installing a KeyGrabber in record mode is quick and easy. Simply plug it in between the USB keyboard and the USB port. No software or drivers are required. The USB keylogger will automatically start recording all data typed on the keyboard to the internal flash disk.

Recorded data can be viewed on any computer or laptop by switching to flash drive mode. Each device has a built-in 3-key combination. Pressing these 3 keys simultaneously will trigger flash drive mode. The keylogger will automatically respond as a mass storage device, with the file LOG.TXT containing all captured data. Keystroke data is formatted in the same as it would appear on the screen, with special keys in brackets ([Ent], [Esc], [Del] etc.).

The Mac Compatibility Pack (MCP) is a hardware enhancement ensuring increased compatibility with Apple Mac computers and keyboards. The KeyGrabber USB with the Mac Compatibility Pack features a special Mac Mode (enabled by default), which will ensure proper operation of the keyboard and logging of all keystrokes.

The usage of a keylogger is fully legal as long as a clear notice is displayed, informing the user of the monitored equipment about the presence of a keystroke logger. We encourage the use of this equipment only for the purpose of monitoring your own computer, especially for protecting children against online hazards. It is NOT LEGAL to use a keylogger for the purpose of intercepting third party data, especially passwords, banking data, confidential correspondence, etc. If in doubt, please seek legal advice before using a keystroke logger. A good starting point is the U.S. Department of Justice Letter on Keystroke Monitoring and Login Banners, according to which a clear notice should be displayed, warning that user keystrokes may be logged.

The device will work with almost all types of physical USB keyboards (it won't work with internal laptop keyboards). It works fine with wireless keyboards, with exception of Bluetooth keyboards. Support for some gaming keyboards is not fully guaranteed, as they often use proprietary protocols.

The KeyGrabber Pico is an ultra-small USB keylogger, only 0.8" (20 mm) in length. It features 16 gigabytes of internal memory (industrial grade), accessible as a USB flash drive. Completely transparent for computer operation, no software or drivers required. Supports national keyboard layouts.

Size is an unquestionable advantage in surveillance, security, and forensic applications of keyloggers. And with 0.8" (20 mm) in length, the KeyGrabber Pico is one of the smallest keyloggers available on the market!

The KeyGrabber family is compatible with all types of USB keyboards and barcode readers. Just connect the keylogger in-line with the keyboard, and all keystroke data will be recorded. The keylogger is 100% stealthy and does not pop-up as a system device.

The device will work with almost all types of physical USB keyboards (it won't work with internal laptop keyboards). It works fine with wireless keyboards, with exception of Bluetooth keyboards. It won't work a few types of keyboards with built-in high-speed USB hubs (primarily Apple A1243 and Dell KB522), for which the Mac/MCP series should be used. Support for some gaming keyboards is not fully guaranteed, as they often use proprietary protocols.

Size is an unquestionable advantage in surveillance, security, and forensic applications of keyloggers. And with 0.4" (10 mm) in length, the AirDrive Forensic Keylogger is by far the smallest keylogger available on the market!

All AirDrive devices act as Wi-Fi hotspots. You can connect to them with any Wi-Fi device, such as a smartphone, tablet, or laptop without even touching the device! The AirDrive device will then present a webpage with the data log and configuration options. No additional software or drivers necessary.

Unlike traditional keyloggers which work as USB flash drives, you don't need to have physical access to an AirDrive Keylogger to retrieve the logged data. Simply connect to it over Wi-Fi, download the log file, and you're done. You can then hide the keylogger by erasing the log, disabling further logging, or even hiding the WLAN network.

The AirDrive Keylogger family is compatible with all types of USB keyboards and barcode readers. Just connect the keylogger in-line with the keyboard, and all keystroke data will be recorded. The keylogger is 100% stealthy and does not pop-up as a system device.

The AirDrive Keylogger is a powerful surveillance and security tool. The web interface allows to configure the Access Point WLAN settings, as well as a keystroke logging options. Over 40 national keyboard layouts are supported, including the most popular languages and keyboard layouts used throughout the world.

The Pro version adds a powerful set of features centered around the capability to act both as a Wi-Fi hotspot, and a Wi-Fi device with Internet connectivity. This unleashes a broad set of options, such as email reporting, time-stamping, and live data streaming.

I finally got around to loading up my OMG keylogger cable with the programmer. once i go in and set the SSID and password and connect to the cable i get the exact same interface as what i get with my non-keylogger OMG cable. I have been very careful to not get the two cables mixed up and am confident that i am using the correct cable. is there a link to the firmware for the keylogger cable? i would like to flash it with the latest firmware to make sure all is on the up and up.

Am, I missing something? Is this what it is supposed to do and I simply misunderstood what the cable Can do? Am I using the wrong end? I am so confused right now. I would be extremely grateful help to anyone who could spare a few minutes to clarify this for me.

No need to read through hours of docs! The majority of what you need is in the official setup docs, which is currently a one page wiki. It's linked from the setup url on the product packaging: -MG/O.MG_Cable-Firmware/wiki

You are looking for the Keylogger section

The keylogger was designed to be placed between a keyboard and the device the keyboard is connected to. And that's what all the product text, instructions, example pictures, and demo videos show. Think of it kind of like the Key Croc, except without leaving a visible adapter in the connection path. The keylogger version of the OMG Cable has been quite a bit more popular than the nonkeylogger version. So, you'll probably find other customers who are willing to share some of their use-cases in the chat channels.

Wait, are you trying to log the keystrokes for a mobile device? The keylogger will log the keystrokes of the laptop that the active end is plugged into. You can select HID or Keyboard. As far as I know you cant log keystrokes on an iOS or Android phone.

@Eight_bit if that is true regarding not being able to log keystrokes for mobile devices then why is the O.MG cable made with the Apple iPhone lightning cable? Macs don't use the lightning cables. Honest question, not challenging you, just curious.

@cooltech "no keyboard"... You do realize that there are keyloggers for iOS and Android that don't require a physical keyboard, right? Also, it is advertised by O.MG that with the right cable you can deliver payloads to smartphones and tablets (which both do not have physical keyboards).

As the sales page and setup instructions detail: the built in keylogger is a USB keylogger.

If you want to deploy a software keylogger by using a duckyscript payload, that's certainly up to you.

Anyone know a list of keyboard languages and possibly a setup guide to change the language in the ui? haven't gotten the keylogger to work since i got the cable or the adapter.any help would be appreciated.

The Forensic Keylogger Keyboard TimeKeeper is a keystroke recording keyboard with an integrated hardware keylogger and timestamping module. The embedded hardware keylogger derives from the KeyGrabber Forensic family, switching to flash drive mode for viewing recorded data. It features a sophisticated FPGA chip with a 32X oversampling algorithm, ensuring a zero character drop rate and full compatibility with all types of USB topologies. A variety of keyboard models is available to choose from when ordering your Forensic Keylogger Keyboard TimeKeeper. The built-in real-time clock will keep track of the time and date independent if the computer is turned on or not.

The Forensic Keylogger Keyboard TimeKeeper has a factory-installed keylogger integrated, based on the high performance KeyGrabber Forensic Keylogger. The USB keyboard model may be chosen for a variety of manufacturers, models, and keyboard layouts (subject to stock availability). This guarantees full stealthiness, as the keylogging module is neither visible to the naked eye, nor to the operating system or security software.

The Forensic Keylogger Keyboard TimeKeeper is a high quality keyboard and keylogger combination, with a zero character drop-rate. It records everything that is typed on the keyboard, and has several levels of filtering and handling control characters.

c80f0f1006