Directory problem

[Eulogio Robles]

I noticed some error messages on my 4.0.6 log files :

02:47:46.87 2 DIRECTORY(inproterm.cl) scanning unit data
02:47:46.87 0 SYSTEM Failed to open Directory at Directory/inproterm.cl.
Line 1. Error Code=directory record format error
02:47:46.88 0 SYSTEM failed to mount the inproterm.cl directory store.
Error Code=directory record format error

"inproterm.cl" is a virtual domain, and it has "directory in sync" enabled.

When I go to Directory -> Display and click on the local unit
"cn=inproterm.cl", I get this message :

Sorry, the Server could not find the requested data.

However, The "write all" and "delete all" buttons works correctly on the
domain settings, and the directory browser displays all records correctly.

These are the three files, obtained from the Directory directory (...) :

::::::::::::::
inproterm.cl.data
::::::::::::::
1:200:0: 3=inproterm.cl 10=inproterm.cl
2:201:0:101="alejandro.paez" 3="Alejandro Paez Avila" 1002=NO
1003=mi.cl 1021=() 4="" 35=xxx
4:201:0:101="carlos.penaloza" 3="" 1002=NO 1003=mi.cl 1021=()
4="" 35=xxxx
5:201:0:101="inproterm" 3="Inproterm S.A" 1002=NO 1003=mi.cl
1021=() 4="" 35=xxxxx
6:201:0:101="jose.medina" 3="Jose Medina Curivil" 1002=NO
1003=mi.cl 1021=() 4="" 35=xxxx
7:201:0:101="paola.carrillo" 3="Paola Carrillo Boegeholz" 1002=NO
1003=mi.cl 1021=() 4="" 35=xxxx
8:201:0:101="raul.tobar" 3="Raul Tobar Toledo" 1002=NO
1003=mi.cl 1021=() 4="" 35=xxxx
3:201:0:101="anamaria" 3="Ana Maria Morga Abarca" 1002=NO
1003=mi.cl 1021=() 4="" 35=xxxxx
::::::::::::::
inproterm.cl.schema
::::::::::::::
#
# The Custom Directory schema
#
::::::::::::::
inproterm.cl.updates
::::::::::::::
A000000008:12:201:0:101="j.labarthe" 3="Jorge Labarthe SantibaM-qez"
1002=NO 1003=mi.cl 4="" 35=xxxxxx

#############################################################
This message is sent to you because you are subscribed to
the mailing list <CGat...@mail.stalker.com>.
To unsubscribe, E-mail to: <CGateP...@mail.stalker.com>
To switch to the DIGEST mode, E-mail to <CGatePr...@mail.stalker.com>
To switch to the INDEX mode, E-mail to <CGatePr...@mail.stalker.com>
Send administrative queries to <CGatePro...@mail.stalker.com>

[Technical Support]

Hello, on 23.05.2003 21:46, Eulogio Robles at eulogio...@mi.cl wrote:

> I noticed some error messages on my 4.0.6 log files :
>
> 02:47:46.87 2 DIRECTORY(inproterm.cl) scanning unit data
> 02:47:46.87 0 SYSTEM Failed to open Directory at Directory/inproterm.cl.
> Line 1. Error Code=directory record format error
> 02:47:46.88 0 SYSTEM failed to mount the inproterm.cl directory store.
> Error Code=directory record format error
>
> "inproterm.cl" is a virtual domain, and it has "directory in sync" enabled.
>
> When I go to Directory -> Display and click on the local unit
> "cn=inproterm.cl", I get this message :
>
> Sorry, the Server could not find the requested data.
>
> However, The "write all" and "delete all" buttons works correctly on the
> domain settings, and the directory browser displays all records correctly.
>
> These are the three files, obtained from the Directory directory (...) :
>
> ::::::::::::::
> inproterm.cl.data
> ::::::::::::::
> 1:200:0: 3=inproterm.cl 10=inproterm.cl

Please try remove the tab character right after the last colon (and before
the digit 3) in the line above. That should help.

> 2:201:0:101="alejandro.paez" 3="Alejandro Paez Avila" 1002=NO

--
Best regards,
Dmitry Akindinov

=======================================================================
When answering to letters sent to you by the tech.support staff, make
sure the original message you have received is included into your reply.