Fsw Psw Man Profile Download
Sandrine Willert
The config and credentials files are organized into sections. Sections include profiles, sso-sessions, and services. A section is a named collection of settings, and continues until another section definition line is encountered. Multiple profiles and sections can be stored in the config and credentials files.
Each profile can specify different credentials and can also specify different AWS Regions and output formats. When naming the profile in a config file, include the prefix word "profile", but do not include it in the credentials file.
The following examples show a credentials and config file with two profiles, region, and output specified. The first [default] is used when you run a AWS CLI command with no profile specified. The second is used when you run a AWS CLI command with the --profile user1 parameter.
This example is for assuming an IAM role. Profiles that use IAM roles pull credentials from another profile, and then apply IAM role permissions. In the following examples, default is the source profile for credentials and user1 borrows the same credentials then assumes a new role. For more information, see Use an IAM role in the AWS CLI.
You define an sso-session section and associate it to a profile. sso_region and sso_start_url must be set within the sso-session section. Typically, sso_account_id and sso_role_name must be set in the profile section so that the SDK can request SSO credentials.
The following example configures the endpoint to use for requests made to the Amazon DynamoDB service in the my-services section that is used in the dev profile. Any immediately following lines that are indented are included in that subsection and apply to that service.
If your profile has role-based credentials configured through a source_profile parameter for IAM assume role functionality, the SDK only uses service configurations for the specified profile. It does not use profiles that are role chained to it. For example, using the following shared config file:
If you use profile B and make a call in your code to Amazon EC2, the endpoint resolves as -b-ec2-endpoint.aws. If your code makes a request to any other service, the endpoint resolution will not follow any custom logic. The endpoint does not resolve to the global endpoint defined in profile A. For a global endpoint to take effect for profile B, you would need to set endpoint_url directly within profile B.
You can keep all of your profile settings in a single file as the AWS CLI can read credentials from the config file. If there are credentials in both files for a profile sharing the same name, the keys in the credentials file take precedence. We suggest keeping credentials in the credentials files. These files are also used by the various language software development kits (SDKs). If you use one of the SDKs in addition to the AWS CLI, confirm if the credentials should be stored in their own file.
When you use a shared profile that specifies an AWS Identity and Access Management (IAM) role, the AWS CLI calls the AWS STS AssumeRole operation to retrieve temporary credentials. These credentials are then stored (in /.aws/cli/cache). Subsequent AWS CLI commands use the cached temporary credentials until they expire, and at that point the AWS CLI automatically refreshes the credentials.
To use a named profile, add the --profile profile-name option to your command. The following example lists all of your Amazon EC2 instances using the credentials and settings defined in the user1 profile.
To use a named profile for multiple commands, you can avoid specifying the profile in every command by setting the AWS_PROFILE environment variable as the default profile. You can override this setting by using the --profile parameter.
Setting the environment variable changes the default profile until the end of your shell session, or until you set the variable to a different value. You can make environment variables persistent across future sessions by putting them in your shell's startup script. For more information, see Environment variables to configure the AWS CLI.
Import CSV credentials generated from the IAM web console. This is not for credentials generated from IAM Identity Center; customers who use IAM Identity Center should use aws configure sso. A CSV file is imported with the profile name matching the username. The CSV file must contain the following headers.
To list configuration data, use the aws configure list command. This command lists the profile, access key, secret key, and region configuration information used for the specified profile. For each configuration item, it shows the value, where the configuration value was retrieved, and the configuration variable name.
This example is for assuming an IAM role. Profiles that use IAM roles pull credentials from another profile, and then apply IAM role permissions. In the following examples, default is the source profile for credentials and user1 borrows the same credentials then assumes a new role. There is no wizard for this process, therefore each value is set using the aws configure set command. For more information, see Use an IAM role in the AWS CLI.
The following settings are supported in the config file. The values listed in the specified (or default) profile are used unless they are overridden by the presence of an environment variable with the same name, or a command line option with the same name. For more information on what order settings take precendence, see Configure the AWS CLI
Used within Amazon EC2 instances or containers to specify where the AWS CLI can find credentials to use to assume the role you specified with the role_arn parameter. You cannot specify both source_profile and credential_source in the same profile.
Specifies a named profile with long-term credentials that the AWS CLI can use to assume a role that you specified with the role_arn parameter. You cannot specify both source_profile and credential_source in the same profile.
Some institutions may enable a feature in Canvas called Profiles. Profiles allows you to update your name, preferred contact methods, and any personal links for your account. Your profile information can be viewed by all users in your courses.
Note: As created in your user profile, email addresses do not appear as a contact method and are only used for Canvas notifications. Canvas users should contact each other via Conversations.
To add personal links to your profile, such as personal websites, blogs, or portfolios, enter the title of the link in the title field [1]. Type the URL in the URL field [2]. Click the remove icon to delete the link [3]. Click the Add another link button to add another link [4].
You can optionally supply an argument to name the profile and this then enables you to stop only that profile if multiple profiles being recorded. See console.profileEnd() to see how this argument is interpreted.
The profiler modules are designed to provide an execution profile for a givenprogram, not for benchmarking purposes (for that, there is timeit forreasonably accurate results). This particularly applies to benchmarkingPython code against C code: the profilers introduce overhead for Python code,but not for C-level functions, and so the C code would seem faster than anyPython one.
This sorts the profile by cumulative time in a function, and then only printsthe ten most significant lines. If you want to understand what algorithms aretaking time, the above line is what you would use.
The file selected by the above constructor must have been created by thecorresponding version of profile or cProfile. To be specific,there is no file compatibility guaranteed with future versions of thisprofiler, and there is no compatibility with files produced by otherprofilers, or the same profiler run on a different operating system. Ifseveral files are provided, all the statistics for identical functions willbe coalesced, so that an overall view of several processes can be consideredin a single report. If additional files need to be combined with data in anexisting Stats object, the add() methodcan be used.
This method of the Stats class accumulates additional profilinginformation into the current profiling object. Its arguments should referto filenames created by the corresponding version of profile.run()or cProfile.run(). Statistics for identically named (re: file, line,name) functions are automatically accumulated into single functionstatistics.
Save the data loaded into the Stats object to a file namedfilename. The file is created if it does not exist, and is overwrittenif it already exists. This is equivalent to the method of the same nameon the profile.Profile and cProfile.Profile classes.
The arguments provided (if any) can be used to limit the list down to thesignificant entries. Initially, the list is taken to be the complete setof profiled functions. Each restriction is either an integer (to select acount of lines), or a decimal fraction between 0.0 and 1.0 inclusive (toselect a percentage of lines), or a string that will interpreted as aregular expression (to pattern match the standard name that is printed).If several restrictions are provided, then they are applied sequentially.For example:
This method for the Stats class prints a list of all functionsthat called each function in the profiled database. The ordering isidentical to that provided by print_stats(), and thedefinition of the restricting argument is also identical. Each caller isreported on its own line. The format differs slightly depending on theprofiler that produced the stats:
With profile, a number is shown in parentheses after each callerto show how many times this specific call was made. For convenience, asecond non-parenthesized number repeats the cumulative time spent in thefunction at the right.
3a7c801d34