FLUID PROCESS WITH UNKNOWN ERROR

[monroya...@gmail.com]

HI, I HAVE A FLUID MODEL.  HOWEVER IT DOESN'T RUN WHEN I USE A SCLMACRO BUTTON, 

I ATTACHED MY SCL FILE, MY MODEL AND A PDF WITH INFORMATION ABOUTH THE ERROR THAT APPEARS WHEN I RUN WITH MY SCL MACRO BUTTON.

AN UNKNOWN ERROR OCCURS WHEN THE FIRST PROCESSOR (CALLED R1) IS DOING THE PROCESS. HOWEVER, THE ERROR DOES NOT OCCUR IF I RUN THE MODEL BY MANUAL MODE (WITHOUT USING MY SCL MACRO BUTTON)

SOME IDEA TO SOLVE THIS SITUATION?

THANKS.

MIGUEL ANGEL, CHEMICAL ENGINEER

[dr.ricardo.pe...@gmail.com]

Hi!

I was not able to find the issue, I mean, I can´t identify the mistake, I hope Martin Barnes or someone has a clue, ... , 

[BARNES Martin]

Hi – sorry for the delay

 

I loaded and ran the model without the SCL Macro – looks fine as you say.

I loaded the macro and ran it, but it needs a file.

Can you email it to the group?

 

Thanks

 

 

Martin BARNES
Senior Software Consultant , Manufacturing - Consulting & Technical Services
Office: +1 248 205 5227 Mobile: +1 248 762 1775 Fax: 248 267 8585 martin...@3ds.com
3DS.COM
DS Americas Corp. | 900 North Squirrel Road, Suite 100 | Auburn Hills, MI 48326 | United States

 

 

--
You received this message because you are subscribed to the Google Groups "delmia_quest" group.
To unsubscribe from this group and stop receiving emails from it, send an email to delmia_quest...@googlegroups.com.
To post to this group, send email to delmia...@googlegroups.com.
Visit this group at https://groups.google.com/group/delmia_quest.
For more options, visit https://groups.google.com/d/optout.

This email and any attachments are intended solely for the use of the individual or entity to whom it is addressed and may be confidential and/or privileged.

If you are not one of the named recipients or have received this email in error,

(i) you should not read, disclose, or copy it,

(ii) please notify sender of your receipt by reply email and delete this email and all attachments,

(iii) Dassault Systèmes does not accept or assume any liability or responsibility for any use of or reliance on this email.

Please be informed that your personal data are processed according to our data privacy policy as described on our website. Should you have any questions related to personal data protection, please contact 3DS Data Protection Officer at 3DS.complia...@3ds.com

For other languages, go to https://www.3ds.com/terms/email-disclaimer

[monroya...@gmail.com]

Hello, many thanks, the file was already attached. 

The path should be modify in your computer in order to run well

regards

Miguel Angel 

To unsubscribe from this group and stop receiving emails from it, send an email to delmia...@googlegroups.com.
To post to this group, send email to delmi...@googlegroups.com.

Visit this group at https://groups.google.com/group/delmia_quest.
For more options, visit https://groups.google.com/d/optout.

This email and any attachments are intended solely for the use of the individual or entity to whom it is addressed and may be confidential and/or privileged.

If you are not one of the named recipients or have received this email in error,

(i) you should not read, disclose, or copy it,

(ii) please notify sender of your receipt by reply email and delete this email and all attachments,

(iii) Dassault Systèmes does not accept or assume any liability or responsibility for any use of or reliance on this email.

Please be informed that your personal data are processed according to our data privacy policy as described on our website. Should you have any questions related to personal data protection, please contact 3DS Data Protection Officer at 3DS.compli...@3ds.com

[BARNES Martin]

Hi:

 

I modified the SCL to use a reply on each BCL statement so as to remove the warning statements.

After that I ran the model and there were no errors.

 

Can you try this out?

 

I have no idea why this would make a difference L

 

Regards

 

Martin BARNES
Senior Software Consultant , Manufacturing - Consulting & Technical Services
Office: +1 248 205 5227 Mobile: +1 248 762 1775 Fax: 248 267 8585 martin...@3ds.com
3DS.COM
DS Americas Corp. | 900 North Squirrel Road, Suite 100 | Auburn Hills, MI 48326 | United States

 

 

 

To unsubscribe from this group and stop receiving emails from it, send an email to delmia_quest...@googlegroups.com.
To post to this group, send email to delmia...@googlegroups.com.

Visit this group at https://groups.google.com/group/delmia_quest.
For more options, visit https://groups.google.com/d/optout.

This email and any attachments are intended solely for the use of the individual or entity to whom it is addressed and may be confidential and/or privileged.

If you are not one of the named recipients or have received this email in error,

(i) you should not read, disclose, or copy it,

(ii) please notify sender of your receipt by reply email and delete this email and all attachments,

(iii) Dassault Systèmes does not accept or assume any liability or responsibility for any use of or reliance on this email.

Please be informed that your personal data are processed according to our data privacy policy as described on our website. Should you have any questions related to personal data protection, please contact 3DS Data Protection Officer at 3DS.complia...@3ds.com

[monroya...@gmail.com]

Thanks, Martin, The SCLMACRO is running now, however the first processor (called R1) does not produce the fluids. It receives the fluids but it doesn't execute the cycle process. I am using the command "SET PROCESS <fluid_process_name> FLUID <fluid_class_name> PRODUCTS MODE TO QUANTITY WITH <scl_expr> ", in order to establish my cycle process. You can see this command in my SCLMacro.

I attached a PDF file with the message window. Please, do you have any idea to solve this situation?

Miguel Angel, 

[dr.ricardo.pe...@gmail.com]

Hi there,

I loaded that SCL Macro, the model runs well by manual mode (run button), However, if the statement BCL("run ...") is executed inside the SCL Macro, then I get the same error message, ... I am not sure why...

Regards...

[BARNES Martin]

Hi Ricardo:

 

I have tried all kinds of approaches to figure out what’s going on, but I don’t understand it.

The statistics differ when you run in normal mode vs running from the SCL.

This looks like a bug to me.

 

However, if you split the Run commands into a different SCL Macro, everything is OK.

Maybe this will work for you.

 

Regards,

 

 

Martin BARNES
Senior Software Consultant , Manufacturing - Consulting & Technical Services
Office: +1 248 205 5227 Mobile: +1 248 762 1775 Fax: 248 267 8585 martin...@3ds.com
3DS.COM
DS Americas Corp. | 900 North Squirrel Road, Suite 100 | Auburn Hills, MI 48326 | United States

 

 

 

To unsubscribe from this group and stop receiving emails from it, send an email to delmia_quest...@googlegroups.com.
To post to this group, send email to delmia...@googlegroups.com.

Visit this group at https://groups.google.com/group/delmia_quest.
For more options, visit https://groups.google.com/d/optout.

This email and any attachments are intended solely for the use of the individual or entity to whom it is addressed and may be confidential and/or privileged.

If you are not one of the named recipients or have received this email in error,

(i) you should not read, disclose, or copy it,

(ii) please notify sender of your receipt by reply email and delete this email and all attachments,

(iii) Dassault Systèmes does not accept or assume any liability or responsibility for any use of or reliance on this email.

Please be informed that your personal data are processed according to our data privacy policy as described on our website. Should you have any questions related to personal data protection, please contact 3DS Data Protection Officer at 3DS.complia...@3ds.com

[dr.ricardo.pe...@gmail.com]

Thanks Martin

Yes, it was a clue, now the model is running by C++. We open Quest in batch mode. Then, we create a BCL macro. It works fine with C++.

Regards

Ricardo

[BARNES Martin]

Glad it worked 

Sent from my iPhone

To unsubscribe from this group and stop receiving emails from it, send an email to delmia_quest...@googlegroups.com.
To post to this group, send email to delmia...@googlegroups.com.

Visit this group at https://groups.google.com/group/delmia_quest.
For more options, visit https://groups.google.com/d/optout.

This email and any attachments are intended solely for the use of the individual or entity to whom it is addressed and may be confidential and/or privileged.

If you are not one of the named recipients or have received this email in error,

(i) you should not read, disclose, or copy it,

(ii) please notify sender of your receipt by reply email and delete this email and all attachments,

(iii) Dassault Systèmes does not accept or assume any liability or responsibility for any use of or reliance on this email.

Please be informed that your personal data are processed according to our data privacy policy as described on our website. Should you have any questions related to personal data protection, please contact 3DS Data Protection Officer at 3DS.complia...@3ds.com