Kinematic Device run problem

[hnkj...@gmail.com]

i have build a Kinematic Device, run simulation, the part can be attached with the device only for the first process part, can anyone tell me i have miss something settings? pls watch the video attached.

[BARNES Martin]

Yep – you missed something.

Not sure what, but if you send the model I’ll check it out.

 

Martin BARNES
Senior Software Consultant , Manufacturing - Consulting & Technical Services
Office: +1 248 205 5227 Mobile: +1 248 762 1775 Fax: 248 267 8585 martin...@3ds.com
3DS.COM
DS Americas Corp. | 900 North Squirrel Road, Suite 100 | Auburn Hills, MI 48326 | United States

--
You received this message because you are subscribed to the Google Groups "delmia_quest" group.
To unsubscribe from this group and stop receiving emails from it, send an email to delmia_quest...@googlegroups.com.
To post to this group, send email to delmia...@googlegroups.com.
Visit this group at https://groups.google.com/group/delmia_quest.
For more options, visit https://groups.google.com/d/optout.

This email and any attachments are intended solely for the use of the individual or entity to whom it is addressed and may be confidential and/or privileged.

If you are not one of the named recipients or have received this email in error,

(i) you should not read, disclose, or copy it,

(ii) please notify sender of your receipt by reply email and delete this email and all attachments,

(iii) Dassault Systèmes does not accept or assume any liability or responsibility for any use of or reliance on this email.

Please be informed that your personal data are processed according to our data privacy policy as described on our website. Should you have any questions related to personal data protection, please contact 3DS Data Protection Officer at 3DS.complia...@3ds.com

For other languages, go to https://www.3ds.com/terms/email-disclaimer

[hnkj...@gmail.com]

在 2018年11月7日星期三 UTC+8下午7:13:33，hnkj...@gmail.com写道：

i have build a Kinematic Device, run simulation, the part can be attached with the device only for the first process part, can anyone tell me i have miss something settings? pls watch the video attached.

Attached the kin file 

[KAI LIU]

Hi, attached the kin file

BARNES Martin <Martin...@3ds.com> 于2018年11月7日周三 下午8:48写道：

[brahim LEFHEIEL]

Hello,

Please follow the steps below to solve the problem,

Cordially

[hnkj...@gmail.com]

Hi, BRAHIM

Fellow your steps, It works well. Thanks for your great help.

sincerely

在 2018年11月8日星期四 UTC+8下午4:59:34，brahim LEFHEIEL写道：