talyblay sailee lawrie
Giancarlo Stewart
How to Fix Sanno P7 LCD Dead Problem with Flash File
Sanno P7 is a budget-friendly smartphone that runs on Android 4.4.2 KitKat operating system and has a 4.5-inch display with a resolution of 480 x 854 pixels. The device is powered by a MediaTek MT6572 chipset with a dual-core processor and 512 MB of RAM. It also has a 5 MP rear camera and a 2 MP front camera.
However, some users of Sanno P7 have reported that their device's LCD screen goes dead or black after flashing the stock firmware or using a custom ROM. This can be a frustrating issue as it renders the device unusable and prevents the user from accessing their data and apps.
Fortunately, there is a way to fix this problem by using a flash file that is compatible with the Sanno P7 device and can restore its LCD functionality. In this article, we will show you how to download and install the Sanno P7 flash file MT6572 LCD dead fix firmware on your device using the SP Flash Tool.
What is Sanno P7 Flash File MT6572 LCD Dead Fix Firmware?
Sanno P7 flash file MT6572 LCD dead fix firmware is a special type of firmware that is designed to solve the LCD dead problem on the Sanno P7 device. It is also known as Sanno P7 stock firmware ROM or flash file. It contains the original software that was installed on the device when it was manufactured.
The flash file can help you to restore your device to its factory settings and fix any software-related issues such as bootloop, IMEI issues, virus infection, etc. It can also help you to upgrade or downgrade your device's Android version.
How to Download Sanno P7 Flash File MT6572 LCD Dead Fix Firmware?
To download the Sanno P7 flash file MT6572 LCD dead fix firmware, you need to follow these steps:
- Go to firmwarecare.com/sanno-p7 and click on the "Get Link" button.
- You will be redirected to another page where you need to enter your email address and click on "Submit".
- You will receive an email with a download link for the Sanno P7 flash file MT6572 LCD dead fix firmware.
- Click on the download link and save the zip file on your computer.
- The zip file contains the firmware, flash tool, USB driver, and how-to flash guide.
How to Install Sanno P7 Flash File MT6572 LCD Dead Fix Firmware?
To install the Sanno P7 flash file MT6572 LCD dead fix firmware on your device, you need to follow these steps:
- Extract the zip file on your computer and open the extracted folder.
- Install the USB driver on your computer if you have not done so before.
- Open the SP Flash Tool folder and launch the flash_tool.exe application.
- Click on the "Scatter-loading" button and browse to the firmware folder. Select the MT6572_Android_scatter.txt file and click "Open".
- All the partitions of the firmware will be loaded on the SP Flash Tool. Make sure you untick the "Preloader" option as flashing it may brick your device.
- Click on the "Download" or "Upgrade" button on the SP Flash Tool to start the flashing process.
- Turn off your device and remove the battery if possible. Connect your device to the computer using a USB cable while holding the volume down or volume up button.
- The SP Flash Tool will detect your device and start flashing the firmware. Wait for the process to complete and do not disconnect your device until you see a green tick mark on the SP Flash Tool.
- Disconnect your device from the computer and insert the battery if removed. Turn on your device and wait for it to boot up.
- Congratulations! You have successfully installed the Sanno P7 flash file MT6572 LCD dead fix firmware on your device.