![]() !!! Check Prices !!! |
TITLE :Buyers ATVS15A 15 Gallon ATV Broadcast Spreader With Rain Cover ASIN : B0000AWYM3 BRAND : Buyers PRICE: $195.13 If not sure !!!!!! Check !!!!! ![]() |
You can order Buyers ATVS15A 15 Gallon ATV Broadcast Spreader With Rain Cover after check, compare the values and check day for shipping. Some people are want to buy Buyers ATVS15A 15 Gallon ATV Broadcast Spreader With Rain Cover on the cheap price. While the item might be priced similarly at different shops.
Most helpful customer reviews
7 of 7 people found the following review helpful.
ATV Spreader for small jobs on the farm
By Marilyn
I tore out a fence and the county came in and rebuilt the ditch. I had about a 40 foot wide strip a half mile long to reseed with Bermuda grass. Not allot of acres but more than I could do with a small hand-held spreader and much too rough and sloped for a pull-type. After researching as much as possible, I bit the bullet and bought this one. It mounts quite easily to my Kawasaki 4 wheeler rack (either rear or front) and has a shield to keep grass seed from hitting the driver if front-mounted. It mounts with 2 U-bolts with wing-nuts. Then attaches to it's own mount with 2 small hitch pins. The only tool I needed was an Allen Wrench (1/32 size, by the way!) The 12 volt actually plugs into the power plug. I didn't have to wire it to the battery as I had expected. (Though this could be a problem if you don't HAVE a power plug on your ATV!) My only complaint about this spreader is that it has no graduations or markings to help you set the openings for different seed or fertilizer. It has two large holes in the bottom of the spreader that are opened with a draw-bar. It took quite a bit of experimenting to get it set close to where I thought it should be. There are instructions on how to calculate the opening but since my 4wheeler has no speedometer, I couldn't use their calculations! If you are spreading Bermuda grass, as I was, then halfway open and driving at 1.8 MPH is about right. The seed flowed through the spreader just fine. Over-all I am very happy with my purchase. I know I will use this spreader to seed pond dams and waterways and spread weed & feed on my lawn in the future.
7 of 7 people found the following review helpful.
ATV Broadcast Spreader
By Chris Chesher
The spreader is a good buy for the price. The spreader is very well constructed. I've used it to spread both pelletized lime and dry granular fertilizer for food plots and the yard and it functions well, spreads evenly and throws it a considerable distance. I put 80 pounds in it and it handled it great. It's really handy having the cigarette lighter plug that plugs directly into the 4 wheeler and an on/off switch you can mount just about anywhere. The heavy poly tank is nice as well, as it has a built in funnel to keep the material flowing and it won't rust. You should be able to spread anything you put in it with no problems as long as it's dry.
The mounting bracket could use some help though. It's heavily made, just needs something on the bottom to keep the spreader from tilting down when you load it up. I fabricated a metal bracket that mounts to the bottom of the spreader and fastens to my 4 wheeler to make the spreader rock solid now. One would think they could have included something similar without much thought. Not the end of the world, but a necessary item for my 4 wheeler rack. The rod or arm for adjusting the flow could have been better designed as well. Again, some minor tweeking may be necessary.
Overall, I am very satisfied with this spreader, but be prepared to do a little work to make this spreader what it should have been from the factory. It should last for a long time and plan on getting lots of use out of it.
5 of 5 people found the following review helpful.
Great Spreader
By JB
I had an Earthway spreader before, but the motor went out so thought I would try the Buyers. The Earthway spreader worked allright with the exception of not emptying completely which was a drag. The design of the Buyers allows it to allways empty with each use which is really great. I had to weld up an additional bracket to stabilize the provided mounting bracket, but no big deal, I had to do the same with the Earthway when it was new. This is a great product what will last many years, and you can buy a replacement motor if needed down the road.