Unicode-Math
Klaus Boer
folgendes Beispiel
\documentclass{scrartcl}
\usepackage{unicode-math}
\setmainfont{XITS}
\setmathfont{XITS Math}
\thispagestyle{empty}
\begin{document}
\[
\sum_{i=1}^n \sin x+i^{\sin x}+ i^{i^{\sin x}}
\]
\end{document}
den Error:
.....
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\base\ts1enc.def"))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\filehook\filehook.sty"
("C:\Program Files (x86)\MiKTeX
2.9\tex\latex\filehook\filehook-scrlfile.sty"))
("C:\Program Files (x86)\MiKTeX
2.9\tex\latex\unicode-math\unicode-math-table.t
ex"))
! Undefined control sequence.
\um_set_mathcode:nnn ...Umathcode \intexpr_eval:n
{#1}=\mathchar@type
#2\csn...
l.7 \setmathfont{XITS Math}
?
Was bedeutet das?
Diesselbe Meldung kommt auch bei jedem anderen Unicode-Font wie z.B.
Cambria/Cambria Math oder Asana Math
Grüsse
Klaus
Herbert Voss
> Nach erfolgreichem Update (MikeTeX 2.9) aller Pakete liefert
> folgendes Beispiel
>
> \documentclass{scrartcl}
> \usepackage{unicode-math}
> \setmainfont{XITS}
> \setmathfont{XITS Math}
XeTeX braucht im Gegensatz zu LuaTeX bei Fonts, die im TeX-Baum
liegen den Dateinamen, also:
\setmainfont{xits-regular.otf}
\setmathfont{xits-math.otf}
Herbert
Philipp Stephani
Kannst du bitte dasselbe Dokument nochmal mit \listfiles am Anfang
kompilieren und die enstandene Versionsliste posten? Irgendein Paket
ist da entweder zu alt oder zu neu...
--
Change “LookInSig” to “tcalveu” to answer by mail.
Philipp Stephani
> Am 17.07.2011 16:32, schrieb Klaus Boer:
>> Nach erfolgreichem Update (MikeTeX 2.9) aller Pakete liefert
>> folgendes Beispiel
>>
>> \documentclass{scrartcl}
>> \usepackage{unicode-math}
>> \setmainfont{XITS}
>> \setmathfont{XITS Math}
>
> XeTeX braucht im Gegensatz zu LuaTeX bei Fonts, die im TeX-Baum
> liegen den Dateinamen
Das müsste aber eine andere Fehlermeldung geben. Hier sieht es danach
aus, dass die Umbenennung von \intexpr_eval nach \int_eval nicht überall
vollzogen wurde. Im aktuellen Quellcode von unicode-math ist allerdings
kein \intexpr mehr vorhanden.
Ulrike Fischer
> Nach erfolgreichem Update (MikeTeX 2.9) aller Pakete liefert
> folgendes Beispiel
>
> \documentclass{scrartcl}
> \usepackage{unicode-math}
> \setmainfont{XITS}
> \setmathfont{XITS Math}
> \thispagestyle{empty}
> \begin{document}
> \[
> \sum_{i=1}^n \sin x+i^{\sin x}+ i^{i^{\sin x}}
> \]
> \end{document}
>
> den Error:
)
> ! Undefined control sequence.
> \um_set_mathcode:nnn ...Umathcode \intexpr_eval:n
> Was bedeutet das?
Du brauchst eine neue Version von unicode-math + lualatex-math. Die
derzeitigen auf CTAN sind nicht mehr kompatible mit expl3.
Du findest sie hier
https://github.com/wspr/unicode-math
https://github.com/phst/lualatex-math
du musst sie manuell installieren, am besten in einem lokalen Baum.
--
Ulrike Fischer
Ulrike Fischer
>> Nach erfolgreichem Update (MikeTeX 2.9) aller Pakete liefert
>> folgendes Beispiel
>> \documentclass{scrartcl}
>> \usepackage{unicode-math}
>> \setmainfont{XITS}
>> \setmathfont{XITS Math}
> XeTeX braucht im Gegensatz zu LuaTeX bei Fonts, die im TeX-Baum
> liegen den Dateinamen, also:
> \setmainfont{xits-regular.otf}
> \setmathfont{xits-math.otf}
In miktex nicht. Der Systemordner + die TeX-Bäume werden gleich
behandelt.
--
Ulrike Fischer
Herbert Voss
> Am Sun, 17 Jul 2011 16:55:32 +0200 schrieb Herbert Voss:
>
>
>>> Nach erfolgreichem Update (MikeTeX 2.9) aller Pakete liefert
>>> folgendes Beispiel
>
>>> \documentclass{scrartcl}
>>> \usepackage{unicode-math}
>>> \setmainfont{XITS}
>>> \setmathfont{XITS Math}
>
>> XeTeX braucht im Gegensatz zu LuaTeX bei Fonts, die im TeX-Baum
>> liegen den Dateinamen, also:
>
>> \setmainfont{xits-regular.otf}
>> \setmathfont{xits-math.otf}
>
> behandelt.
Ah, wusste ich nicht.
Herbert
Philipp Stephani
> Am Sun, 17 Jul 2011 16:32:56 +0200 schrieb Klaus Boer:
>
>> Nach erfolgreichem Update (MikeTeX 2.9) aller Pakete liefert
>> folgendes Beispiel
>>
>> \documentclass{scrartcl}
>> \usepackage{unicode-math}
>> \setmainfont{XITS}
>> \setmathfont{XITS Math}
>> \thispagestyle{empty}
>> \begin{document}
>> \[
>> \sum_{i=1}^n \sin x+i^{\sin x}+ i^{i^{\sin x}}
>> \]
>> \end{document}
>>
>> den Error:
> )
>> ! Undefined control sequence.
>> \um_set_mathcode:nnn ...Umathcode \intexpr_eval:n
>
>> Was bedeutet das?
>
> Du brauchst eine neue Version von unicode-math + lualatex-math. Die
> derzeitigen auf CTAN sind nicht mehr kompatible mit expl3.
>
> Du findest sie hier
>
> https://github.com/wspr/unicode-math
> https://github.com/phst/lualatex-math
Ich denke (bzw. hoffe) nicht, dass man auch lualatex-math neu
installieren muss. Seit dem CTAN-Upload habe ich eigentlich nur die
icomma-Kompatibilität hinzugefügt und nichts geändert, was die
Kompatibilität mit expl3 verbessern würde. Wenn die CTAN-Version
Probleme macht, treten die gleichen Probleme bestimmt auch bei der
GitHub-Version auf (dann bitte gleich melden).
Klaus Boer
denen ich laut "Manueller Installation" :
....
Run TeX on unicode-math.dtx to generate the package file unicode-math.sty:
tex unicode-math.dtx
....
eingeben soll.
Gut, die Datei unicode-math.dtx habe ich heruntergeladen, selbiges am
Prompt eingegeben. Das Ergebis ist ein Wust von Fehlermeldungen. Hier
nur der Anfang:
This is TeX, Version 3.1415926 (MiKTeX 2.9) (preloaded format=tex
2011.6.8) 19 JUL 2011 10:36
**unicode-math.dtx
(C:\Users\Klaus\Downloads\unicode-math.dtx
Overfull \hbox (8.13498pt too wide) in paragraph at lines 6--15
\tenrm tent="chrome=1"> <script type="text/javascript">var
NREUMQ=[];NREUMQ.pus
h(["mark","firstbyte",new|
\hbox(7.5+2.5)x469.75499, glue set - 1.0
.\tenrm t
.\tenrm e
.\tenrm n
.\kern-0.27779
.\tenrm t
.etc.
! Missing $ inserted.
<inserted text>
Welche Dateien brauche ich für die Win/MikeTeX installation? Was genau
muss man für die korrekte manuelle Installation machen?
Klaus Boer
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\unicode-math\unicode-math.sty"
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\ifxetex\ifxetex.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\ifluatex.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\expl3.sty"
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3names.sty"
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3bootstrap.sty"))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\misc\etex.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\tools\calc.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3basics.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3expan.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3tl.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3seq.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3int.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3quark.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3prg.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3clist.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3token.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3prop.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3msg.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3io.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3file.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3skip.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3box.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3keyval.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3keys.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3fp.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3luatex.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3toks.sty"))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3packages\xparse\xparse.sty")
("C:\Program Files (x86)\MiKTeX
2.9\tex\latex\l3packages\l3keys2e\l3keys2e.sty"
) ("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\fontspec\fontspec.sty"
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\binhex\binhex.tex")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\xkeyval\xkeyval.sty"
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\xkeyval\xkeyval.tex"))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\fontspec\fontspec-patches.sty"
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\base\fixltx2e.sty"))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\base\fontenc.sty"
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\euenc\eu1enc.def")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\euenc\eu1lmr.fd"))
("C:\Program Files (x86)\MiKTeX 2.9\tex\xelatex\xunicode\xunicode.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\fontspec\fontspec.cfg"))
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\catchfile.sty"
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\infwarerr.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\ltxcmds.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\etexcmds.sty"))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\trimspaces\trimspaces.sty")
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\base\fix-cm.sty"
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\base\ts1enc.def"))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\filehook\filehook.sty"
("C:\Program Files (x86)\MiKTeX
2.9\tex\latex\filehook\filehook-scrlfile.sty"))
("C:\Program Files (x86)\MiKTeX
2.9\tex\latex\unicode-math\unicode-math-table.t
ex"))
! Undefined control sequence.
\um_set_mathcode:nnn ...Umathcode \intexpr_eval:n
{#1}=\mathchar@type
#2\csn...
l.7 \setmathfont{XITS Math}
?
Process has been terminated ...
Ulrike Fischer
> Gut, die Datei unicode-math.dtx habe ich heruntergeladen, selbiges am
> Prompt eingegeben. Das Ergebis ist ein Wust von Fehlermeldungen. Hier
> nur der Anfang:
>
> This is TeX, Version 3.1415926 (MiKTeX 2.9) (preloaded format=tex
> 2011.6.8) 19 JUL 2011 10:36
> **unicode-math.dtx
> (C:\Users\Klaus\Downloads\unicode-math.dtx
> Overfull \hbox (8.13498pt too wide) in paragraph at lines 6--15
> \tenrm tent="chrome=1"> <script type="text/javascript">var
> NREUMQ=[];NREUMQ.pus
> h(["mark","firstbyte",new|
> Welche Dateien brauche ich für die Win/MikeTeX installation? Was genau
> muss man für die korrekte manuelle Installation machen?
Nun, als erstes brauchst du die richtige dtx-Datei und nicht
irgendeine html-Datei oder was auch immer, du hast offensichtlich
irgendeine Download-Webseite runtergeladen.
--
Ulrike Fischer
Uwe Bieling
> nach Koma-Script kommt das folgende listing:
Ich glaube, dass meinte Philipp nicht. In der log-Datei müsst etwas wie
*File List*
scrartcl.cls 2011/04/02 v3.09 KOMA-Script document class (article)
[...]
***********
erscheinen.
>> Kannst du bitte dasselbe Dokument nochmal mit \listfiles am Anfang
>> kompilieren und die enstandene Versionsliste posten? Irgendein Paket
>> ist da entweder zu alt oder zu neu...
Ciao,
Uwe
Klaus Boer
downloaded und landete auch mit selbigem Namen auf meiner Festplatte.
Klaus Boer
Das hat aber keinerlei Auswirkung.
gruß klaus
Klaus Boer
Der vollständige Log-file sieht etwas ausführlicher aus:
This is XeTeX, Version 3.1415926-2.3-0.9997.5 (MiKTeX 2.9) (preloaded
format=xelatex 2011.6.8) 19 JUL 2011 12:54
entering extended mode
**Xetex_Test_UnicodeMath.tex
(E:\TEX\Test\Xetex\Xetex_Test_UnicodeMath.tex
LaTeX2e <2009/09/24>
Babel <v3.8l> and hyphenation patterns for english, afrikaans,
ancientgreek, ar
abic, armenian, assamese, basque, bengali, bokmal, bulgarian, catalan,
coptic,
croatian, czech, danish, dutch, esperanto, estonian, farsi, finnish,
french, ga
lician, german, german-x-2009-06-19, greek, gujarati, hindi, hungarian,
ibycus,
icelandic, indonesian, interlingua, irish, italian, kannada, kurmanji,
lao, la
tin, latvian, lithuanian, malayalam, marathi, mongolian, mongolianlmc,
monogree
k, ngerman, ngerman-x-2009-06-19, nynorsk, oriya, panjabi, pinyin,
polish, port
uguese, romanian, russian, sanskrit, serbian, slovak, slovenian,
spanish, swedi
sh, swissgerman, tamil, telugu, turkish, turkmen, ukenglish, ukrainian,
upperso
rbian, usenglishmax, welsh, loaded.
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\koma-script\scrartcl.cls"
Document Class: scrartcl 2011/06/16 v3.09a KOMA-Script document class
(article)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\koma-script\scrkbase.sty"
Package: scrkbase 2011/06/16 v3.09a KOMA-Script package
(KOMA-Script-dependent
basics and keyval usage)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\koma-script\scrbase.sty"
Package: scrbase 2011/06/16 v3.09a KOMA-Script package
(KOMA-Script-independent
basics and keyval usage)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\graphics\keyval.sty"
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\koma-script\scrlfile.sty"
Package: scrlfile 2011/03/09 v3.09 KOMA-Script package (loading files)
Package scrlfile, 2011/03/09 v3.09 KOMA-Script package (loading files)
Copyright (C) Markus Kohm
))) ("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\koma-script\tocbasic.sty"
Package: tocbasic 2011/05/30 v3.09a KOMA-Script package (handling toc-files)
)
Package tocbasic Info: omitting babel extension for `toc'
(tocbasic) because of feature `nobabel' available
(tocbasic) for `toc' on input line 115.
Package tocbasic Info: omitting babel extension for `lof'
(tocbasic) because of feature `nobabel' available
(tocbasic) for `lof' on input line 116.
Package tocbasic Info: omitting babel extension for `lot'
(tocbasic) because of feature `nobabel' available
(tocbasic) for `lot' on input line 117.
Class scrartcl Info: File `scrsize11pt.clo' used instead of
(scrartcl) file `scrsize11.clo' to setup font sizes on input
line 124
7.
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\koma-script\scrsize11pt.clo"
File: scrsize11pt.clo 2011/06/16 v3.09a KOMA-Script font size class
option (11p
t)
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\koma-script\typearea.sty"
Package: typearea 2011/06/16 v3.09a KOMA-Script package (type area)
Package typearea, 2011/06/16 v3.09a KOMA-Script package (type area)
Copyright (C) Frank Neukam, 1992-1994
Copyright (C) Markus Kohm, 1994-
\ta@bcor=\skip41
\ta@div=\count80
\ta@hblk=\skip42
\ta@vblk=\skip43
\ta@temp=\skip44
Package typearea Info: These are the values describing the layout:
(typearea) DIV = 10
(typearea) BCOR = 0.0pt
(typearea) \paperwidth = 597.50793pt
(typearea) \textwidth = 418.25555pt
(typearea) DIV departure = -6%
(typearea) \evensidemargin = 17.3562pt
(typearea) \oddsidemargin = 17.3562pt
(typearea) \paperheight = 845.04694pt
(typearea) \textheight = 595.80026pt
(typearea) \topmargin = -25.16531pt
(typearea) \headheight = 17.0pt
(typearea) \headsep = 20.40001pt
(typearea) \topskip = 11.0pt
(typearea) \footskip = 47.60002pt
(typearea) \baselineskip = 13.6pt
(typearea) on input line 1139.
)
\c@part=\count81
\c@section=\count82
\c@subsection=\count83
\c@subsubsection=\count84
\c@paragraph=\count85
\c@subparagraph=\count86
\abovecaptionskip=\skip45
\belowcaptionskip=\skip46
\c@pti@nb@sid@b@x=\box26
\c@figure=\count87
\c@table=\count88
\bibindent=\dimen102
) ("C:\Program Files (x86)\MiKTeX
2.9\tex\latex\unicode-math\unicode-math.sty"
Package: unicode-math 2011/01/29 v0.5d Unicode maths in XeLaTeX and LuaLaTeX
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\ifxetex\ifxetex.sty"
Package: ifxetex 2010/09/12 v0.6 Provides ifxetex conditional
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\ifluatex.sty"
Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO)
Package ifluatex Info: LuaTeX not detected.
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\expl3.sty"
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3names.sty"
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3bootstrap.sty"
Package: l3bootstrap 2011/06/19 v2478 L3 Experimental bootstrap code
)
Package: l3names 2011/06/19 v2478 L3 Experimental namespace for primitives
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\misc\etex.sty"
Package: etex 1998/03/26 v2.0 eTeX basic definition package (PEB)
\et@xins=\count89
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\tools\calc.sty"
Package: calc 2007/08/22 v4.3 Infix arithmetic (KKT,FJ)
\calc@Acount=\count90
\calc@Bcount=\count91
\calc@Adimen=\dimen103
\calc@Bdimen=\dimen104
\calc@Askip=\skip47
\calc@Bskip=\skip48
LaTeX Info: Redefining \setlength on input line 76.
LaTeX Info: Redefining \addtolength on input line 77.
\calc@Ccount=\count92
\calc@Cskip=\skip49
)
Package: expl3 2011/06/19 v2478 L3 Experimental code bundle wrapper
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3basics.sty"
Package: l3basics 2011/07/04 v2493 L3 Experimental basic definitions
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3expan.sty"
Package: l3expan 2011/06/20 v2480 L3 Experimental argument expansion
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3tl.sty"
Package: l3tl 2011/07/09 v2498 L3 Experimental token lists
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3seq.sty"
Package: l3seq 2011/06/19 v2478 L3 Experimental sequences and stacks
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3int.sty"
Package: l3int 2011/06/19 v2478 L3 Experimental integers
\c_max_int=\count93
\l_tmpa_int=\count94
\l_tmpb_int=\count95
\l_tmpc_int=\count96
\g_tmpa_int=\count97
\g_tmpb_int=\count98
\g_seq_nesting_depth_int=\count99
\g_tl_inline_level_int=\count100
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3quark.sty"
Package: l3quark 2011/06/19 v2478 L3 Experimental quarks
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3prg.sty"
Package: l3prg 2011/07/06 v2495 L3 Experimental control structures
\g_prg_stepwise_level_int=\count101
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3clist.sty"
Package: l3clist 2011/07/09 v2498 L3 Experimental comma separated lists
\g_clist_map_inline_int=\count102
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3token.sty"
Package: l3token 2011/07/02 v2491 L3 Experimental token manipulation
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3prop.sty"
Package: l3prop 2011/06/19 v2478 L3 Experimental property lists
\g_prop_map_inline_int=\count103
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3msg.sty"
Package: l3msg 2011/06/19 v2478 L3 Experimental messages
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3io.sty"
Package: l3io 2011/06/19 v2478 L3 Experimental input-output operations
\l_iow_stream_int=\count104
\l_iow_line_length_int=\count105
\l_iow_target_length_int=\count106
\l_iow_current_line_int=\count107
\l_iow_current_word_int=\count108
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3file.sty"
Package: l3file 2011/06/19 v2478 L3 Experimental file operations
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3skip.sty"
Package: l3skip 2011/06/19 v2478 L3 Experimental dimensions and skips
\l_tmpa_dim=\dimen105
\l_tmpb_dim=\dimen106
\l_tmpc_dim=\dimen107
\g_tmpa_dim=\dimen108
\g_tmpb_dim=\dimen109
\l_tmpa_skip=\skip50
\l_tmpb_skip=\skip51
\l_tmpc_skip=\skip52
\g_tmpa_skip=\skip53
\g_tmpb_skip=\skip54
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3box.sty"
Package: l3box 2011/06/19 v2478 L3 Experimental boxes
\l_tmpb_box=\box27
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3keyval.sty"
Package: l3keyval 2011/06/19 v2478 L3 Experimental key-value parsing
\g_keyval_level_int=\count109
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3keys.sty"
Package: l3keys 2011/06/19 v2478 L3 Experimental key-value interfaces
\l_keys_choice_int=\count110
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3fp.sty"
Package: l3fp 2011/06/19 v2478 L3 Experimental floating-point operations
\c_one_million=\count111
\c_one_hundred_million=\count112
\c_five_hundred_million=\count113
\c_one_thousand_million=\count114
\c_fp_pi_by_four_decimal_int=\count115
\c_fp_pi_by_four_extended_int=\count116
\c_fp_pi_decimal_int=\count117
\c_fp_pi_extended_int=\count118
\c_fp_two_pi_decimal_int=\count119
\c_fp_two_pi_extended_int=\count120
\l_fp_count_int=\count121
\l_fp_div_offset_int=\count122
\l_fp_exp_integer_int=\count123
\l_fp_exp_decimal_int=\count124
\l_fp_exp_extended_int=\count125
\l_fp_exp_exponent_int=\count126
\l_fp_input_a_sign_int=\count127
\l_fp_input_a_integer_int=\count128
\l_fp_input_a_decimal_int=\count129
\l_fp_input_a_exponent_int=\count130
\l_fp_input_b_sign_int=\count131
\l_fp_input_b_integer_int=\count132
\l_fp_input_b_decimal_int=\count133
\l_fp_input_b_exponent_int=\count134
\l_fp_input_a_extended_int=\count135
\l_fp_input_b_extended_int=\count136
\l_fp_mul_a_i_int=\count137
\l_fp_mul_a_ii_int=\count138
\l_fp_mul_a_iii_int=\count139
\l_fp_mul_a_iv_int=\count140
\l_fp_mul_a_v_int=\count141
\l_fp_mul_a_vi_int=\count142
\l_fp_mul_b_i_int=\count143
\l_fp_mul_b_ii_int=\count144
\l_fp_mul_b_iii_int=\count145
\l_fp_mul_b_iv_int=\count146
\l_fp_mul_b_v_int=\count147
\l_fp_mul_b_vi_int=\count148
\l_fp_mul_output_int=\count149
\l_fp_output_sign_int=\count150
\l_fp_output_integer_int=\count151
\l_fp_output_decimal_int=\count152
\l_fp_output_exponent_int=\count153
\l_fp_output_extended_int=\count154
\l_fp_round_position_int=\count155
\l_fp_round_target_int=\count156
\l_fp_split_sign_int=\count157
\l_fp_tmp_int=\count158
\l_fp_trig_octant_int=\count159
\l_fp_trig_sign_int=\count160
\l_fp_trig_decimal_int=\count161
\l_fp_trig_extended_int=\count162
\l_fp_tmp_dim=\dimen110
\l_fp_tmp_skip=\skip55
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3luatex.sty"
Package: l3luatex 2011/06/19 v2478 L3 Experimental LuaTeX-specific functions
\g_cctab_allocate_int=\count163
\g_cctab_stack_int=\count164
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3kernel\l3toks.sty"
Package: l3toks 2011/06/19 v2478 L3 Experimental token registers
\l_tmpb_toks=\toks15
\l_tmpc_toks=\toks16
\g_tmpa_toks=\toks17
\g_tmpb_toks=\toks18
\g_tmpc_toks=\toks19
\c_empty_toks=\toks20
\l_tl_replace_toks=\toks21
))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\l3packages\xparse\xparse.sty"
Package: xparse 2011/07/02 v2492 L3 Experimental document command parser
\l_xparse_m_args_int=\count165
\l_xparse_mandatory_args_int=\count166
\l_xparse_processor_int=\count167
\l_xparse_total_args_int=\count168
)
("C:\Program Files (x86)\MiKTeX
2.9\tex\latex\l3packages\l3keys2e\l3keys2e.sty"
Package: l3keys2e 2011/07/02 v2492 LaTeX2e option processing using
LaTeX3 keys
) ("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\fontspec\fontspec.sty"
Package: fontspec 2011/02/26 v2.1f Advanced font selection for
XeLaTeX/LuaLaTeX
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\binhex\binhex.tex")
\l_fontspec_script_int=\count169
\l_fontspec_language_int=\count170
\l_fontspec_strnum_int=\count171
Variant \tl_gset:cV already defined; not changing it on line 83
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\xkeyval\xkeyval.sty"
Package: xkeyval 2008/08/13 v2.6a package option processing (HA)
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\xkeyval\xkeyval.tex"
\XKV@toks=\toks22
\XKV@tempa@toks=\toks23
\XKV@depth=\count172
File: xkeyval.tex 2008/08/13 v2.6a key=value parser (HA)
))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\fontspec\fontspec-patches.sty"
Package: fontspec-patches 2011/02/26 v2.1f Advanced font selection for
XeLaTeX/
LuaLaTeX
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\base\fixltx2e.sty"
Package: fixltx2e 2006/09/13 v1.1m fixes to LaTeX
LaTeX Info: Redefining \em on input line 420.
LaTeX Info: Redefining \textsubscript on input line 424.
)
LaTeX Info: Redefining \em on input line 22.
LaTeX Info: Redefining \emph on input line 29.
LaTeX Info: Redefining \- on input line 32.
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\base\fontenc.sty"
Package: fontenc 2005/09/27 v1.99g Standard LaTeX package
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\euenc\eu1enc.def"
File: eu1enc.def 2010/05/27 v0.1h Experimental Unicode font encodings
)
LaTeX Font Info: Try loading font information for EU1+lmr on input
line 100.
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\euenc\eu1lmr.fd"
File: eu1lmr.fd 2009/10/30 v1.6 Font defs for Latin Modern
))
("C:\Program Files (x86)\MiKTeX 2.9\tex\xelatex\xunicode\xunicode.sty"
File: xunicode.sty 2010/11/06 v0.96 provides access to latin accents and
many o
ther characters in Unicode lower plane
)
.................................................
. xparse info: "define-command"
.
. Defining document command \fontspec with arg. spec. 'O{}m' on line 335.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \setmainfont with arg. spec. 'O{}m' on line 339.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \setsansfont with arg. spec. 'O{}m' on line 343.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \setmonofont with arg. spec. 'O{}m' on line 347.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \setmathrm with arg. spec. 'O{}m' on line 351.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \setboldmathrm with arg. spec. 'O{}m' on
line 354.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \setmathsf with arg. spec. 'O{}m' on line 357.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \setmathtt with arg. spec. 'O{}m' on line 360.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \newfontfamily with arg. spec. 'mO{}m' on line
. 377.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \newfontface with arg. spec. 'mO{}m' on line
380.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \defaultfontfeatures with arg. spec. 'm' on line
. 383.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \addfontfeatures with arg. spec. 'm' on line
400.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \newfontfeature with arg. spec. 'mm' on line
407.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \newAATfeature with arg. spec. 'mmmm' on
line 416.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \newICUfeature with arg. spec. 'mmm' on line
425.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \aliasfontfeature with arg. spec. 'mm' on line
. 427.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \aliasfontfeatureoption with arg. spec. 'mmm' on
. line 430.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \newfontscript with arg. spec. 'mm' on line 435.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \newfontlanguage with arg. spec. 'mm' on
line 457.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \DeclareFontsExtensions with arg. spec. 'm' on
. line 474.
.................................................
Variant \prop_gput:cnV already defined; not changing it on line 746
Variant \prop_gput:cnx already defined; not changing it on line 747
\c@fontspec_tmp_int=\count173
LaTeX Info: Redefining \itshape on input line 2105.
LaTeX Info: Redefining \slshape on input line 2109.
LaTeX Info: Redefining \scshape on input line 2113.
LaTeX Info: Redefining \upshape on input line 2117.
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\fontspec\fontspec.cfg"))
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\catchfile.sty"
Package: catchfile 2011/03/01 v1.6 Catches the contents of a file (HO)
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\infwarerr.sty"
Package: infwarerr 2010/04/08 v1.3 Providing info/warning/message (HO)
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\ltxcmds.sty"
Package: ltxcmds 2011/04/18 v1.20 LaTeX kernel commands for general use (HO)
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\etexcmds.sty"
Package: etexcmds 2011/02/16 v1.5 Prefix for e-TeX command names (HO)
Package etexcmds Info: Could not find \expanded.
(etexcmds) That can mean that you are not using pdfTeX 1.50 or
(etexcmds) that some package has redefined \expanded.
(etexcmds) In the latter case, load this package earlier.
))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\trimspaces\trimspaces.sty"
Package: trimspaces 2009/09/17 v1.1 Trim spaces around a token list
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\base\fix-cm.sty"
Package: fix-cm 2006/09/13 v1.1m fixes to LaTeX
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\base\ts1enc.def"
File: ts1enc.def 2001/06/05 v3.0e (jk/car/fm) Standard LaTeX file
))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\filehook\filehook.sty"
Package: filehook 2011/03/09 v0.5a Hooks for input files
("C:\Program Files (x86)\MiKTeX
2.9\tex\latex\filehook\filehook-scrlfile.sty"
Package: filehook-scrlfile 2011/01/03 v0.1 filehook patch for scrlfile
package
Package filehook Info: Package 'scrlfile' detected and compensated for
on input
line 102.
))
Variant \tl_put_right:cx already defined; not changing it on line 36
Variant \seq_if_in:NVTF already defined; not changing it on line 37
\g_um_fam_int=\count174
.................................................
. xparse info: "define-command"
.
. Defining document command \unimathsetup with arg. spec. 'm' on line 583.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \setmathfont with arg. spec. 'O{}m' on line
1022.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \resetmathfont with arg. spec. 'O{}m' on line
. 1031.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \addnolimits with arg. spec. 'm' on line 1148.
.................................................
.................................................
. xparse info: "define-command"
.
. Defining document command \removenolimits with arg. spec. 'm' on line
1151.
.................................................
("C:\Program Files (x86)\MiKTeX
2.9\tex\latex\unicode-math\unicode-math-table.t
ex")
\g_um_primekern_muskip=\muskip10
\l_um_primecount_int=\count175
)
.................................................
. Initialising \mathup.
.................................................
.................................................
. Initialising \mathit.
.................................................
.................................................
. Initialising \mathbb.
.................................................
.................................................
. Initialising \mathbbit.
.................................................
.................................................
. Initialising \mathscr.
.................................................
.................................................
. Initialising \mathcal.
.................................................
.................................................
. Initialising \mathbfcal.
.................................................
.................................................
. Initialising \mathfrak.
.................................................
.................................................
. Initialising \mathtt.
.................................................
.................................................
. Initialising \mathsfup.
.................................................
.................................................
. Initialising \mathsfit.
.................................................
.................................................
. Initialising \mathbfup.
.................................................
.................................................
. Initialising \mathbfit.
.................................................
.................................................
. Initialising \mathbfscr.
.................................................
.................................................
. Initialising \mathbffrak.
.................................................
.................................................
. Initialising \mathbfsfup.
.................................................
.................................................
. Initialising \mathbfsfit.
.................................................
.................................................
. Initialising \mathsf.
.................................................
.................................................
. Initialising \mathbf.
.................................................
.................................................
. Initialising \mathbfsf.
.................................................
\g_fontspec_family_XITS_int=\count176
.................................................
. fontspec info: "defining-font"
.
. Defining font family 'XITS(0)' for font 'XITS' with options [].
.................................................
.................................................
. fontspec info: "defining-raw"
.
. Defining shape 'normal' with NFSS spec.:
. <->"XITS/ICU:script=latn;language=DFLT;"
.................................................
.................................................
. fontspec info: "defining-raw"
.
. Defining shape 'bold' with NFSS spec.:
. <->"XITS/B/ICU:script=latn;language=DFLT;"
.................................................
.................................................
. fontspec info: "defining-raw"
.
. Defining shape 'italic' with NFSS spec.:
. <->"XITS/I/ICU:script=latn;language=DFLT;"
.................................................
.................................................
. fontspec info: "defining-raw"
.
. Defining shape 'bold italic' with NFSS spec.:
. <->"XITS/BI/ICU:script=latn;language=DFLT;"
.................................................
LaTeX Font Info: Redeclaring math version `normal' on input line 9.
\g_fontspec_family_XITS Math_int=\count177
.................................................
. fontspec info: "defining-font"
.
. Defining font family 'XITSMath(0)' for font 'XITS Math' with options
.
[BoldFont={},ItalicFont={},Script=Math,SizeFeatures={{Size=10-},{Size=7-10,Fo
nt=XITS
. Math,ScriptStyle},{Size=-7,Font=XITS Math,ScriptScriptStyle}},].
.................................................
.................................................
. fontspec info: "defining-raw"
.
. Defining shape 'normal' with NFSS spec.:
. <10->"XITS Math/ICU:script=math;language=DFLT;"<7-10>"XITS
. Math/ICU:script=math;language=DFLT;+ssty=0;"<-7>"XITS
. Math/ICU:script=math;language=DFLT;+ssty=1;"
.................................................
.................................................
. Defining the default maths font as 'XITS Math'.
.................................................
\symum_allsym=\mathgroup4
.................................................
. fontspec info: "defining-font"
.
. Defining font family 'XITSMath(1)' for font 'XITS Math' with options
.
[BoldFont={},ItalicFont={},Script=Math,SizeFeatures={{Size=10-},{Size=7-10,Fo
nt=XITS
. Math,ScriptStyle},{Size=-7,Font=XITS
. Math,ScriptScriptStyle}},,Scale=1.00001,FontAdjustment={\fontdimen 8\font
. =5.8pt\relax \relax \fontdimen 9\font =4.8pt\relax \relax \fontdimen
10\font
. =4.8pt\relax \relax \fontdimen 11\font =7.0pt\relax \relax \fontdimen
. 12\font =4.8pt\relax \relax \fontdimen 13\font =4.0pt\relax \relax
. \fontdimen 14\font =4.0pt\relax \relax \fontdimen 15\font =2.75pt\relax
. \relax \fontdimen 16\font =2.5pt\relax \relax \fontdimen 17\font
. =2.5pt\relax \relax \fontdimen 18\font =3.75pt\relax \relax \fontdimen
. 19\font =0.5pt\relax \relax \fontdimen 20\font =0pt\relax \fontdimen
21\font
. =0pt\relax \fontdimen 22\font =2.5pt\relax \relax }].
.................................................
.................................................
. fontspec info: "defining-raw"
.
. Defining shape 'normal' with NFSS spec.:
. <10->s*[1.00001]"XITS
. Math/ICU:script=math;language=DFLT;"<7-10>s*[1.00001]"XITS
. Math/ICU:script=math;language=DFLT;+ssty=0;"<-7>s*[1.00001]"XITS
. Math/ICU:script=math;language=DFLT;+ssty=1;"
. and font adjustment code:
. \fontdimen 8\font =5.8pt\relax \relax \fontdimen 9\font =4.8pt\relax
\relax
. \fontdimen 10\font =4.8pt\relax \relax \fontdimen 11\font =7.0pt\relax
. \relax \fontdimen 12\font =4.8pt\relax \relax \fontdimen 13\font
. =4.0pt\relax \relax \fontdimen 14\font =4.0pt\relax \relax \fontdimen
. 15\font =2.75pt\relax \relax \fontdimen 16\font =2.5pt\relax \relax
. \fontdimen 17\font =2.5pt\relax \relax \fontdimen 18\font =3.75pt\relax
. \relax \fontdimen 19\font =0.5pt\relax \relax \fontdimen 20\font
=0pt\relax
. \fontdimen 21\font =0pt\relax \fontdimen 22\font =2.5pt\relax \relax
.................................................
LaTeX Font Info: Redeclaring symbol font `symbols' on input line 9.
LaTeX Font Info: Encoding `OMS' has changed to `EU1' for symbol font
(Font) `symbols' in the math version `normal' on input line 9.
LaTeX Font Info: Overwriting symbol font `symbols' in version `normal'
(Font) OMS/cmsy/m/n --> EU1/XITSMath(1)/m/n on input
line 9.
LaTeX Font Info: Encoding `OMS' has changed to `EU1' for symbol font
(Font) `symbols' in the math version `bold' on input line 9.
LaTeX Font Info: Overwriting symbol font `symbols' in version `bold'
(Font) OMS/cmsy/b/n --> EU1/XITSMath(1)/m/n on input
line 9.
.................................................
. fontspec info: "defining-font"
.
. Definin
Klaus Boer
Beim Durchlauf bekomme ich jetzt die folgende Fehlermeldung:
("C:\Program Files (x86)\MiKTeX
2.9\tex\latex\unicode-math\unicode-math.sty"
! LaTeX Error: Missing \begin{document}.
See the LaTeX manual or LaTeX Companion for explanation.
Type H <return> for immediate help.
...
Meine Testdatei sieht immer noch so aus:
\documentclass{scrartcl}
\usepackage{unicode-math}
\setmainfont{XITS}
\setmathfont{XITS Math}
\thispagestyle{empty}
\begin{document}
\[
\sum_{i=1}^n \sin x+i^{\sin x}+ i^{i^{\sin x}}
\]
\end{document}
Nun verstehe ich gar nichts mehr
Christine Roemer
http://answerpot.com/showthread.php?918724-xits+font+in+~%2F.fonts
christine
Ulrike Fischer
> Habe inzwischen unicode-math.sty neu installiert (version 5e)
> Beim Durchlauf bekomme ich jetzt die folgende Fehlermeldung:
>
> ("C:\Program Files (x86)\MiKTeX
> 2.9\tex\latex\unicode-math\unicode-math.sty"
Du solltest neue, lokale Versionen nicht in den Hauptbaum von Miktex
installieren. Die gehören in lokale Bäume, bzw bei den ersten Test
erstmal in den Ordner des Testdokuments-
> ! LaTeX Error: Missing \begin{document}.
Ich habe keine Probleme (mal abgesehen davon, dass die neueste
Version die Schrift lmmath benötigt). Aber die Meldung klingt
danach, als wäre direkt am Anfang der sty-Datei etwas Druckbares,
was eigentlich nicht in eine sty-Datei gehört. Hast du denn die
Datei mal geöffnet?
--
Ulrike Fischer
Klaus Boer
seltsamen Zeichen vor dem eigentlichen Code "\iffalse" in der
unicode-math.sty. Wie die da reingekommen sind ....
Ich hab jedenfalls alles noch einmal sauber heruntergeladen, neu
compiliert, installiert ... und... es funktioniert!! Noch die
lmmath-regular.otf installiert, voilà alles bestens!
Ganz herzlichen Dank
Klaus