Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
HELP ! How to install GVP (G-Force?) Board in A3k ???
1 view
Skip to first unread message
JK
Jul 11, 1999, 3:00:00 AM7/11/99
to
Hi all the Amigaowners out there !
Recently I got an old Accelerator board from GVP for my A3000.
Since I didn´t got any Manual for that board I installed it - and nothing
works :-((
I guess there are some Jumpers to be changed on A3k board... but which ?
Well If someone has some help for me -- >> PLEASE HELP ME <<--
Technical Info :
------
The board is to be fittet into the Fast-Slot of the A3k
It´s labeld GVP A3000-040 Rev.5
It´s a 040 CPU with 28 MHz
The board has 8 PS/2 looking like SIMM Slots
...and 2 Sockets for ROM´s
So, if you can help me, please post to this newsgroup or even
better send me a mail !
Thanks !
Joern Koerner
j...@msdatentechnik.de
Greg Brown
Jul 11, 1999, 3:00:00 AM7/11/99
to
You may need to remove the board, install any new software required to run
the board, re-install the board and then boot it up. That's what I had to do
with the Blizzard '060 card I put in my A2000.
the board, re-install the board and then boot it up. That's what I had to do
with the Blizzard '060 card I put in my A2000.
Greg Brown
Greensboro, North Carolina USA
0 new messages