cdrecord bug? (or is it my computer!)
Don Myroon
I am having a problem with cdrecord. I have created an audio CD
that worked properly (on the same system before I started having this
problem. I don't know what changed), but now I'm getting the following
error every time I try to write anything (either writing data, audio or
just blanking a CDRW):
drizzt:~/multimedia/mp3/cd$ cdrecord -scanbus
Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'MATSHITA' 'UJDA310 ' '1.32' Removable
CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
drizzt:~/multimedia/mp3/cd$ cdrecord -v dev=0,0,0 speed=1 -swab -pad
-audio *.cdr
Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'MATSHITA'
Identifikation : 'UJDA310 '
Revision : '1.32'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1359872 = 1328 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 36 MB (03:34.25) no preemp pad
Track 02: audio 54 MB (05:22.50) no preemp pad
Track 03: audio 44 MB (04:25.76) no preemp pad
Track 04: audio 41 MB (04:05.91) no preemp pad
Track 05: audio 42 MB (04:14.04) no preemp pad
Track 06: audio 51 MB (05:03.96) no preemp pad
Track 07: audio 46 MB (04:35.43) no preemp pad
Track 08: audio 51 MB (05:03.93) no preemp pad
Track 09: audio 31 MB (03:07.50) no preemp pad
Track 10: audio 41 MB (04:08.47) no preemp pad
Track 11: audio 36 MB (03:39.06) no preemp pad
Track 12: audio 33 MB (03:19.36) no preemp pad
Track 13: audio 34 MB (03:26.02) no preemp pad
Track 14: audio 57 MB (05:42.67) no preemp pad
Track 15: audio 43 MB (04:17.80) no preemp pad
Track 16: audio 28 MB (02:48.04) no preemp pad
Track 17: audio 39 MB (03:54.42) no preemp pad
Total size: 720 MB (71:21.34) = 321101 sectors
Lout start: 720 MB (71:23/26) = 321101 sectors
Current Secsize: -1
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11940 (97:22/60)
ATIP start of lead out: 335975 (74:41/50)
speed low: 0 speed high: 4
power mult factor: 3 5
recommended erase/write power: 2
A2 values: 00 00 00
Disk type: phase change
Manuf. index: 43
Manufacturer: Acer Media Technology, Inc.
Blocks total: 335975 Blocks current: 335975 Blocks remaining: 14874
Starting to write CD/DVD at speed 1 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 0 of 36 MB written.cdrecord: Input/output error. write_g1:
scsi sendcmd: retryable error
CDB: 2A 00 00 00 00 00 00 00 0D 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0C 00 00 00 00 64 C0 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x64 Qual 0xC0 (illegal mode for this track) [No matching
qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 12.293s timeout 40s
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 0C 00 00 00 00 00 00 00 00 00 00
Writing time: 17.342s
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd:
retryable errorCDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0C 00 00 00 00 72 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x04 (empty or partially written reserved track)
Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 480s
Fixating time: 0.007s
cdrecord: fifo had 128 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
drizzt:~/multimedia/mp3/cd$
I was hoping that maybe someone could tell me what that error means?
I'm
using a DELL Inspiron 7500 laptop computer with Redhat Linux v6.2.
Like I mentioned earlier, it did work for me a couple times before.
Same system - I don't know what changed. Perhaps it's a
hardware problem?
I've used about 4 CDRs and two different CDRWs and get the same results.
Thanks for your input.
Sincerely,
Don Myroon
Douglas E. Mitton
I've been searching for a solution to this problem ... or at least one
which is VERY similar, for quite some time now. My symptoms are that
cdrecord generates the "write_g1" and "0x2" codes at some point during
every burn BUT only since I upgraded to kernel v2.2.14, 2.2.15 and
2.2.16. When I go back to V2.2.13 it works just fine for data and
audio tracks.
I don't get the error when I'm blanking the CD-RW's BUT I do notice it
seems to lock up the entire computer until the "erase" is complete. I
can't do anything which accesses the hard drive that shares the CD IDE
channel.
Can you think of any change you have made to your system that
coincided with the error ... kernel upgrade, moveing the CD-R to a new
position in the IDE chain?
Please post any information you find. Thanks in advance.
Don Myroon <tar...@telusplanet.net> wrote:
>Hello,
>
>I am having a problem with cdrecord. I have created an audio CD
>that worked properly (on the same system before I started having this
>problem. I don't know what changed), but now I'm getting the following
>error every time I try to write anything (either writing data, audio or
>just blanking a CDRW):
>
>drizzt:~/multimedia/mp3/cd$ cdrecord -scanbus
>Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
>Using libscg version 'schily-0.1'
>scsibus0:
> 0,0,0 0) 'MATSHITA' 'UJDA310 ' '1.32' Removable
>CD-ROM
> 0,1,0 1) *
> 0,2,0 2) *
> 0,3,0 3) *
> 0,4,0 4) *
> 0,5,0 5) *
> 0,6,0 6) *
> 0,7,0 7) *
>
>Starting new track at sector: 0
>Track 01: 0 of 36 MB written.cdrecord: Input/output error. write_g1:
>scsi sendcmd: retryable error
>CDB: 2A 00 00 00 00 00 00 00 0D 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 03 00 00 00 00 0C 00 00 00 00 64 C0 00 00
>
>I was hoping that maybe someone could tell me what that error means?
>I'm
>using a DELL Inspiron 7500 laptop computer with Redhat Linux v6.2.
>Like I mentioned earlier, it did work for me a couple times before.
>Same system - I don't know what changed. Perhaps it's a
>hardware problem?
>
>I've used about 4 CDRs and two different CDRWs and get the same results.
>
>Thanks for your input.
>
>Sincerely,
>
>Don Myroon
------------------------------------------------
Doug Mitton - Brockville, Ontario, Canada
'City of the Thousand Islands'
EMail: dmi...@cybertap.x.com
http://www.cybertap.com/dmitton
Other: mitton.dyndns.org
SPAM Reduction: Remove "x." from my domain.
------------------------------------------------
sysop
> Please post any information you find. Thanks in advance.
maybe my information could be usefull too, so does a solution...
I'm using slackware 7 with the 2.2.16 kernel and cdrecord 1.8.1.
The hp cd-writter 7200i used to work great in my old system but since I
updated my linux not anymore.
// the usual stuff
// cdrecord -version
Cdrecord 1.8.1 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'HP ' 'CD-Writer+ 7200 ' '3.01' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
// the burning process and the error I get
// cdrecord -v dev=0,0 -audio -dao -speed=2 *.cdr
Cdrecord 1.8.1 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 7200 '
Revision : '3.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 786432 = 768 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 49 MB (04:53.20) no preemp swab
Track 02: audio 62 MB (06:08.93) no preemp swab
Track 03: audio 51 MB (05:06.62) no preemp swab
Track 04: audio 57 MB (05:41.78) no preemp swab
Track 05: audio 75 MB (07:28.26) no preemp swab
Track 06: audio 17 MB (01:46.29) no preemp swab
Track 07: audio 63 MB (06:17.02) no preemp swab
Track 08: audio 6 MB (00:38.77) no preemp swab
Track 09: audio 88 MB (08:46.97) no preemp swab
Track 10: audio 236 MB (23:28.56) no preemp swab
Total size: 709 MB (70:16.44) = 316233 sectors
Lout start: 709 MB (70:18/33) = 316233 sectors
Current Secsize: 2048
ATIP start of lead in: -11319 (97:31/06)
ATIP start of lead out: 336225 (74:45/00)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 336225 Blocks current: 316233 Blocks remaining: 0
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 9 seconds. 8
seconds. 7 seconds. 6 seconds. 5
seconds. 4 seconds. 3 seconds. 2
seconds. 1 seconds.
Waiting for reader process to fill input buffer ... cdrecord: Input/output
error. mode select g1: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
input buffer ready.
CDB: 55 10 00 00 00 00 00 00 3C 00
Sense Bytes: F0 00 05 00 00 00 00 19 00 00 50 98 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (valid)
cmd finished after 0.022s timeout 200s
cdrecord: Warning: using default CD write parameter data.
cdrecord: Cannot open new session.
cdrecord: fifo had 128 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
Mode Select Data 00 12 00 00 05 32 02 00 00 00 00 00 00 00 00 00 00 00 00 96
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00
Could someone please help me with this problem or if there already is a
solution for it, please say so...
thanks in advance,
wolter kamphuis