Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Cdrecord.

2 views
Skip to first unread message

Federico Baraldi

unread,
Nov 27, 2000, 3:00:00 AM11/27/00
to
Hi all, I've a Mandrake 7.2 and a problem using my ATAPI cd-recorder.

Here what's happening ....

[root@fred root]# cdrecord -scanbus
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
Schilling
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'MITSUMI ' 'CR-2801TE ' '1.07' Removable CD-ROM
0,1,0 1) '_NEC ' 'DV-5700A ' '1.91' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *

[root@fred root]# cdrecord speed=2 dev=0,0,0 -isosize /dev/scd1
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
Schilling
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.1'
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'MITSUMI '
Identifikation : 'CR-2801TE '
Revision : '1.07'
Device seems to be: Philips CDD-522.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 9 seconds, ecc.
cdrecord: Errore di input/output. write_g1: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
CDB: 2A 00 00 00 00 00 00 00 1F 00
Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 30 08 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x08 (cannot write - application code mismatch) Fru
0x0
Sense flags: Blk 0 (not valid)
cdrecord: Errore di input/output. close track/session: scsi sendcmd:
retryable error
status: 0x2 (CHECK CONDITION)
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 06 00 00 00 00 00 00 00 00 00 00
CDB: 5B 00 02 00 00 00 00 00 00 00
Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 30 08 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x08 (cannot write - application code mismatch) Fru
0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 480s
cdrecord: Errore di input/output. mode select g1: scsi sendcmd: retryable
error
status: 0x2 (CHECK CONDITION)
CDB: 55 10 00 00 00 00 00 00 10 00
Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s

Any help/hint would be appreciated !!

Thank you .... Bye.

Federico.


Young4ert

unread,
Nov 27, 2000, 3:00:00 AM11/27/00
to
I got similar error messages when trying to burn a CDRW media; however,
the burnt media seems to be working just fine. I have no idea why such
error messages did pop up when my drive was trying to FIXATING the CDRW
media. So far, I have not tried to verify if the burnt CDRW media is
100% identical with the original one. Also, I have not had a chance to
burn a CDR media, yet. My CDRW is an Acer 8x4x32.

I don't know if the above information will do you good. Good luck.

--
youn...@MailandNews.com

PS. Remove "4" from e-mail address should you want to reply.

Kenneth Rørvik

unread,
Nov 28, 2000, 3:00:00 AM11/28/00
to
fede...@fbaraldi.it (Federico Baraldi) wrote in
<8vu4sg$7un$1...@news.mclink.it>:

>Hi all, I've a Mandrake 7.2 and a problem using my ATAPI cd-recorder.
>
>Here what's happening ....

>Sense flags: Blk 0 (not valid)


>cmd finished after 0.001s timeout 480s
>cdrecord: Errore di input/output. mode select g1: scsi sendcmd: retryable
>error
>status: 0x2 (CHECK CONDITION)
>CDB: 55 10 00 00 00 00 00 00 10 00
>Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 26 00 00 00
>Sense Key: 0x5 Illegal Request, Segment 0
>Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
>Sense flags: Blk 0 (not valid)
>cmd finished after 0.001s timeout 40s
>
>Any help/hint would be appreciated !!

I had the same error messages, only after write, while trying to fixate.
Turned out to be a defective CDRW unit.

--
Kenneth Rørvik 91841353/22950312
Nordbergv. 60 A ken...@spambuster.rorvik.com
0875 OSLO home.no.net/stasis

aflinsch

unread,
Nov 28, 2000, 3:00:00 AM11/28/00
to Federico Baraldi
Federico Baraldi wrote:

> status: 0x2 (CHECK CONDITION)
> CDB: 2A 00 00 00 00 00 00 00 1F 00
> Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 30 08 00 00


> Sense Key: 0x5 Illegal Request, Segment 0

> Sense Code: 0x30 Qual 0x08 (cannot write - application code mismatch) Fru


> 0x0
> Sense flags: Blk 0 (not valid)

> cdrecord: Errore di input/output. close track/session: scsi sendcmd:


> retryable error
> status: 0x2 (CHECK CONDITION)

> write track data: error after 0 bytes

> Sense Bytes: 70 00 00 00 00 00 00 06 00 00 00 00 00 00 00 00 00 00
> CDB: 5B 00 02 00 00 00 00 00 00 00
> Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 30 08 00 00


> Sense Key: 0x5 Illegal Request, Segment 0

> Sense Code: 0x30 Qual 0x08 (cannot write - application code mismatch) Fru


> 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.001s timeout 480s
> cdrecord: Errore di input/output. mode select g1: scsi sendcmd: retryable
> error
> status: 0x2 (CHECK CONDITION)
> CDB: 55 10 00 00 00 00 00 00 10 00
> Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 26 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.001s timeout 40s
>


I had similar errors when running under Mandrake 6.0 (long since
upgraded to 6.1, 7.0, 7.1 & 7.2). it turned out to be a bad cdrw
drive. Replacing the unit fixed the problem.

Federico Baraldi

unread,
Nov 28, 2000, 3:00:00 AM11/28/00
to
"Kenneth Rørvik" <ken...@spambuster.rorvik.com> wrote
news:8FFA654D1ke...@148.122.208.74...

> I had the same error messages, only after write, while trying to fixate.
> Turned out to be a defective CDRW unit.

My Mitsumi works well under Windoze .... and the error occour while
starting to write .....

Federico.

Tony Spinillo

unread,
Nov 28, 2000, 7:33:56 PM11/28/00
to
Federico,

Have you tried the latest cdrecord - cdrtools-1.10a07? There is a
blurb in the release notes about a fix for some IDE drives.

Tony

Paul Lew

unread,
Nov 28, 2000, 7:37:39 PM11/28/00
to
On Tue, 28 Nov 2000, Federico Baraldi <fede...@fbaraldi.it> wrote:
>"Kenneth Rørvik" <ken...@spambuster.rorvik.com> wrote
>news:8FFA654D1ke...@148.122.208.74...
>
>> I had the same error messages, only after write, while trying to fixate.
>> Turned out to be a defective CDRW unit.
>
>My Mitsumi works well under Windoze .... and the error occour while
>starting to write .....
>
>Federico.
>
>
Did you specify the device (e.g. /dev/scd1) when doing mkisofs? If you
had used cdrecord 1.9, then I found that version required it when I first
used it (at least with my system).

Federico Baraldi

unread,
Nov 29, 2000, 3:00:00 AM11/29/00
to
"Paul Lew" <pl...@csus.edu> wrote in
news:slrn928js...@crane.li-po.edu...

> Did you specify the device (e.g. /dev/scd1) when doing mkisofs?

Well ... actually I tried to burn cd with this command:

cdrecord -v speed=2 dev=0,0,0 -isosize /dev/scd1

where /dev/scd1 is my DVD player. So I bypass mkisofs command.

> If you had used cdrecord 1.9, then I found that version required it when I
first
> used it (at least with my system).

Do you think I shold try making a cd iso-image and then triying to burn
from the iso-image and not diretcly from my cd-player ??

Bye.
Federico.

Paul Lew

unread,
Nov 29, 2000, 3:00:00 AM11/29/00
to
On Wed, 29 Nov 2000, Federico Baraldi <fede...@fbaraldi.it> wrote:
>"Paul Lew" <pl...@csus.edu> wrote in
>news:slrn928js...@crane.li-po.edu...
>
>> Did you specify the device (e.g. /dev/scd1) when doing mkisofs?
>
>Well ... actually I tried to burn cd with this command:
>
>cdrecord -v speed=2 dev=0,0,0 -isosize /dev/scd1
>
>where /dev/scd1 is my DVD player. So I bypass mkisofs command.
>
>> If you had used cdrecord 1.9, then I found that version required it when I
>first
>> used it (at least with my system).
>
>Do you think I shold try making a cd iso-image and then triying to burn
>from the iso-image and not diretcly from my cd-player ??
>
The man page for cdrecord has -dao for "disk at once" mode for "MMC" drives
but don't know if that would work without an image; the man says one can
record without images but it looks like it was for audio tracks that are
on the harddrive.

Haven't really heard nor seen any docs regarding direct copying from a
cd to cdr; perhaps in later updates but for now, suggest creating an
image file first.

friedhel...@gmx.net

unread,
Nov 29, 2000, 3:00:00 AM11/29/00
to
In comp.os.linux.hardware Federico Baraldi <fede...@fbaraldi.it> wrote:

: My Mitsumi works well under Windoze .... and the error occour while
: starting to write .....

Just for the record:
The Mitsumi does give an error when in the *fixating stage*. It seems
to be a timing problem. It is annoing, but harmless. The disk will be
ok.

Your problem is a different one. I don't know what causes it, but it
might be related to the firmware of the drive. There are different
versions. Maybe your drive is too old for the new cdrecord-version.

Probably you can get it to work with an older(or newer) version of
cdrecord.

I also don't know, if it is possible to upgrade the drive's firmware.

Regards,
Friedhelm

--
Microsoft is NOT the answer. Microsoft is the Question.
The answer is: "NO!"
-------------------------------------------------------------------
Friedhelm Mehnert, Berliner Allee 42, 22850 Norderstedt, Germany
phone + fax: +49-40-5236562 email: friedhel...@gmx.net
-------------------------------------------------------------------


Federico Baraldi

unread,
Dec 4, 2000, 3:00:00 AM12/4/00
to
"Paul Lew" <pl...@csus.edu> wrote in
news:slrn92au4...@crane.li-po.edu...

> The man page for cdrecord has -dao for "disk at once" mode for "MMC"
drives
> but don't know if that would work without an image; the man says one can
> record without images but it looks like it was for audio tracks that are
> on the harddrive.

Ok ... now I tried this:

[root@home /root]# mkisofs -o track.iso /mnt/cdrom
Using INDEX000 for ./rr_moved/index (index)
Using EBT000 for ./rr_moved/ebt (ebt)
Using INDEX001 for ./rr_moved/index (index)
Using FIGUR000 for ./rr_moved/figures (figures)
Using EBT001 for ./rr_moved/ebt (ebt)
Using INDEX002 for ./rr_moved/index (index)
Using EBT002 for ./rr_moved/ebt (ebt)
Using FIGUR001 for ./rr_moved/figures (Figures)
Using INDEX003 for ./rr_moved/index (index)
Using FIGUR002 for ./rr_moved/Figures (figures)
Using EBT003 for ./rr_moved/ebt (ebt)
Using WINDO000 for /mnt/cdrom/Varie - Aggiornamento
2.44% done, estimate finish Sun Dec 3 11:55:31 2000
4.87% done, estimate finish Sun Dec 3 11:58:36 2000
7.30% done, estimate finish Sun Dec 3 11:58:43 2000
9.73% done, estimate finish Sun Dec 3 11:58:35 2000
12.17% done, estimate finish Sun Dec 3 11:58:31 2000
14.59% done, estimate finish Sun Dec 3 11:58:29 2000
17.03% done, estimate finish Sun Dec 3 11:58:33 2000
19.45% done, estimate finish Sun Dec 3 11:58:25 2000
21.89% done, estimate finish Sun Dec 3 11:58:24 2000
24.32% done, estimate finish Sun Dec 3 11:58:23 2000
26.76% done, estimate finish Sun Dec 3 11:58:23 2000
9.18% done, estimate finish Sun Dec 3 11:58:22 2000
31.62% done, estimate finish Sun Dec 3 11:58:21 2000
34.05% done, estimate finish Sun Dec 3 11:58:21 2000
36.48% done, estimate finish Sun Dec 3 11:58:21 2000
38.92% done, estimate finish Sun Dec 3 11:58:20 2000
41.34% done, estimate finish Sun Dec 3 11:58:20 2000
43.78% done, estimate finish Sun Dec 3 11:58:20 2000
46.21% done, estimate finish Sun Dec 3 11:58:19 2000
48.64% done, estimate finish Sun Dec 3 11:58:17 2000
51.07% done, estimate finish Sun Dec 3 11:58:19 2000
53.50% done, estimate finish Sun Dec 3 11:58:17 2000
55.94% done, estimate finish Sun Dec 3 11:58:17 2000
58.37% done, estimate finish Sun Dec 3 11:58:17 2000
60.80% done, estimate finish Sun Dec 3 11:58:20 2000
63.23% done, estimate finish Sun Dec 3 11:58:23 2000
65.66% done, estimate finish Sun Dec 3 11:58:27 2000
68.09% done, estimate finish Sun Dec 3 11:58:42 2000
70.53% done, estimate finish Sun Dec 3 11:58:41 2000
72.96% done, estimate finish Sun Dec 3 11:58:40 2000
75.39% done, estimate finish Sun Dec 3 11:58:39 2000
77.82% done, estimate finish Sun Dec 3 11:58:38 2000
80.26% done, estimate finish Sun Dec 3 11:58:38 2000
82.69% done, estimate finish Sun Dec 3 11:58:37 2000
85.12% done, estimate finish Sun Dec 3 11:58:36 2000
87.55% done, estimate finish Sun Dec 3 11:58:36 2000
89.99% done, estimate finish Sun Dec 3 11:58:34 2000
92.41% done, estimate finish Sun Dec 3 11:58:33 2000
94.85% done, estimate finish Sun Dec 3 11:58:34 2000
97.28% done, estimate finish Sun Dec 3 11:58:34 2000
99.71% done, estimate finish Sun Dec 3 11:58:33 2000
Total translation table size: 0
Total rockridge attributes bytes: 0
Total directory bytes: 448512
Path table size(bytes): 2466
Max brk space used 1cf7c4
205606 extents written (401 Mb)
And then:

[root@home /root]# cdrecord -v speed=2 dev=0,0,0 -isosize track.iso

Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
Schilling

TOC Type: 1 = CD-ROM


scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.1'

atapi: 1


Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'MITSUMI '
Identifikation : 'CR-2801TE '
Revision : '1.07'
Device seems to be: Philips CDD-522.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO

Drive buf size : 409600 = 400 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 401 MB
Total size: 461 MB (45:41.44) = 205608 sectors
Lout start: 461 MB (45:43/33) = 205608 sectors
Current Secsize: 2352
ATIP info from disk:
Indicated writing power: 5
Is unrestricted
Is not erasable
ATIP start of lead in: -11465 (97:29/10)
ATIP start of lead out: 337349 (74:59/74)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 38
Manufacturer: Vanguard Disc Inc.
Blocks total: 337349 Blocks current: 337349 Blocks remaining: 131741


Starting to write CD/DVD at speed 2 in write mode for single session.

Last chance to quit, starting real write in 9 8 7 6 5 4 3 2 1
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0

Track 01: 0 of 401 MB written.cdrecord: Errore di input/output. write_g1:


scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)

CDB: 2A 00 00 00 00 00 00 00 1F 00
Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 30 08 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x08 (cannot write - application code mismatch) Fru
0x0
Sense flags: Blk 0 (not valid)

write track data: error after 0 bytes


Sense Bytes: 70 00 00 00 00 00 00 06 00 00 00 00 00 00 00 00 00 00

Writing time: 8.136s
Fixating...


cdrecord: Errore di input/output. close track/session: scsi sendcmd:
retryable
error
status: 0x2 (CHECK CONDITION)

CDB: 5B 00 02 00 00 00 00 00 00 00
Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 30 08 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x08 (cannot write - application code mismatch) Fru
0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 480s

Fixating time: 0.004s


cdrecord: Errore di input/output. mode select g1: scsi sendcmd: retryable
error
status: 0x2 (CHECK CONDITION)
CDB: 55 10 00 00 00 00 00 00 10 00
Sense Bytes: 70 00 05 00 00 00 00 06 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s

cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

So the error has changed .... but the result was the same ;-((

Bye.

Federico.


Paul Lew

unread,
Dec 5, 2000, 3:00:00 AM12/5/00
to
I'm out of ideas but did read someone's msg mentioning problems with the
mitsumi drives. Have you tried another brand of the cdr blanks?
I did see a few lines of cdrecord errors mentioned in the author's web site
and a "solution"; maybe your errors would also be there....
"www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling
/private/cdrecord.html"
0 new messages