Re: Xforce Keygen 32bits Or 64bits Version Motion FX 2019 Key
Rocco Mickel
I recently upgraded LabVIEW to 2010 64bit. Then it turned out the previous motion control VIs don't function in 2010 64bit version. The error points to the failure to load "FlexMotion32.dll". It makes sense, apparently that DLL file is 32-bit.
You are correct, NI Motion can run on a 64 bit machine (useing emulation) with 32-bit LabVIEW but you do not get the extra memory addresses provided by the 64 bit OS. At this point is is running in an emulated 32-bit environment.
NI-Motion is badly in need of some maintenance work. It has been neglected for many years (ever since NI bought the drivers?) and the number of red coercion dots it produces is shameful. NI seem to have almost unlimited development resources when it comes to developing yet more shiny new products - why can't a small fraction of that be devoted to maintaining/fixing the ones they already have?
We value your feedback on our NI-Motion Software. We have a limited amount of resources but will take your recommendations into account for the driver. I am sorry that we do not have a 64 bit driver for NI Motion and hope that this does not slow down the development of your latest project. Please let us know anytime you have feedback we are always trying to take into account what our customers need and manage our time according to it.
Is there any estimation for the time frame. We are using ni motion to run a stage for an image application. We need more memory for rather lengthy line scan processing. That is why we need 64 bit drivers.
An updated EEPROM in motion control stages sold starting in early 2022 necessitates a controller firmware upgrade. If you receive an "unknown stage" or "phasing error" message, please update your Kinesis software to the latest version, and use the included firmware update utility.There are two software platforms available to drive our wide range of motion controller products on compatible Windows PCs. However, please note that the KVS30, MBD602, and CT1P devices are only compatible with our Kinesis software.
The Kinesis Software features new .NET controls which can be used by 3rd party developers working in the latest C#, Visual Basic, LabVIEW or any .NET compatible languages to create custom applications. Included are low level DLL libraries available for applications not expected to use the .NET framework. A Central Sequence Manager supports integration and synchronization of all Thorlabs motion control hardware and a simulator is included to assist in developing custom applications without requiring hardware.
The APT System Software is our legacy software platform. It features easy-to-use, ActiveX-based controls which can be used by 3rd party developers working on C#, Visual Basic, LabVIEW or any Active-X compatible languages to create custom applications,and includes a simulator mode to assist in developing custom applications without requiring hardware.
Guides to using our Kinesis or APT software packages with LabVIEW can be found here.
The software is organized into the following categories:
We use third-party services that help us optimize our website to improve our user experience. We require your consent. By clicking Accept all cookies you agree to the storage of cookies on your browser and the transmission of your data to third parties.
- Azure/Microsoft- tracking for app insights Azure's third-party cookies allow Thorlabs to track data from the user to improve the experience for our customers. The session cookie ai_session, has a duration of thirty minutes. The ai_user cookie has a duration of one year. These cookies are set and maintained by Microsoft.
- Live/LivePerson/Live Person (Conversational Cloud) uses information stored in cookies to maintain session data and to identify returning visitors by saving Conversational Cloud-specific data such as visitor ID and last chat date. It is important to note that the cookies do not contain any private customer data or any data that can be accessible or useful outside of Conversational Cloud. The session cookie lpsid has a storage duration of 30 minutes and the cookie Ipvid has a duration of one year. These cookies are set and maintained by Live Person.
Cool stuff. I've heard of Waifu2x before, but I don't do work with animation, so I haven't paid much attention. I'll give it a look at some point in the near future, if for no other reason than to do better screenshot upscaling.
Apologies for the late reply, and thanks for the shout out.
Basically, the 64 bit version is more stable and faster in most cases, but has less support for legacy plugins. I really hope that most of the major plugins get ported over to 64-bit in the near future, because I think it this point there would be very few systems that require it.
QTGMC has its issues, in particular when you're dealing with a really grainy image. If there were a better solution (ideally open-source) out there that didn't cost an obscenely large amount of money, I would promote and use it.
Running with your comment about FrameRateConverter: "32-bit version was exponentially slower than the 64-bit version", I installed Avisynth+ 3.6.1 and replaced Avisynth 2.6 32bit. The documentation on the web is poor. Nowhere does it say you need to run 64bit Virtualdub2 to use 64bit plugins in Avisynth+. It took several hours to figure that out. If Avisynth is presenting a virtual avi file via the avs script, why would it matter if the calling app is 32bit or 64bit?
The 1920x1080p video I'm working on, I'm trying to double the framerate. Only the "slowest" preset gives acceptable results (no blocking in video). I changed the script from single threaded to 4 threads (quad core Xeon CPU). I'm getting 1.06 sec/frame with all plugins 64bit. With everything 32bit, I was getting 0.96 sec/frame. That is not much difference, certainly not exponential. Once it's done (3 days from now), I'm uninstalling Avisynth+ and reinstalling Avisynth 2.6 32bit.
I'm also testing Svpflow on the same video to see how it compares. Svpflow is what Interframe uses. It's running at 2.5FPS on a different PC that has a GTX1080Ti.
To christina:
About QTGMC- used correctly, it dramatically improves the amount of detail in interlaced video, by properly (bobbing and motion compensation) changing it to progressive. Some videos have information in the double frames too. To determine if you want to keep or delete them, you have to step through the processed video frame by frame to see if they're duplicates or not.
IMO, live footage generally looks best with a high frame rate. And movies do not (IMO). I doubled the frame rate on one movie (with FRC) and didn't like the soap opera effect at all. You can control what to do with the extra frames. If you don't like them, add a SelectEven() after the QTGMC line (or use fpsdivisor=2). That will delete the double frames.
Here's what I typically use in QTGMC:
QTGMC( Preset="Slow" )
If noisy:
QTGMC( Preset="Slow", NoisePreset="Slower" )
If later feeding to Video Enhance AI for upscaling, you typically don't want to do much denoising:
QTGMC( Preset="Fast", TR0=1 )
Brandon,
I think that your settings must have a different bottleneck than the ones that I was using, because I can assure you that there was a *dramatic* difference between 32-bit and 64-bit renders in my case. My guess is that the "slowest" preset is the cause, but I'd have to test to be sure.
I agree that documentation for AVISynth is poor for new users (and even professionals) at this point, which is a big reason why I started making these tutorials. I'm not a programmer, but I assume that there's something about the instructions used in AVISynth's design that requires everything to be 64-bit all throughout the chain.
As to the 32-bit vs. 64-bit debate, at this point I've essentially switched over to using only 64-bit plugins whenever possible due to memory issues. There are still a few filters that haven't transitioned yet, but they're getting less and less as time goes on.
Regardless, thanks for the info about AI upscaling. I need to look into that at some point.
Hi all,
I updated my running Nexcloud instance to the latest stable version. In the Admin Settings, I get the organge text info that my php is running on 32 bit and that 64 bit will be needed. My Nextcloud instance is running on a Raspberry Pi 4 that had been running on Raspberry Pi OS 10 (32 bit). I upgraded from Raspberry Pi OS 10 to the latest version 11 and I activated the 64 bit kernel. However, php 8.1 is still running at 32 bit. I read that upgrading from Raspberry Pi OS 10 32 bit to version 11 will only allow running the 64 bit kernel in an otherwise 32 bit context.
Only the 64bit Kernel will not do the job, the rest of your software stays on 32bit. And that is what causes the incompatibility. I had exactly the same problem and decided to give my Raspberry Pi4 a complete 64bit refresh, while at the same time eliminating old software installs.
The Pi4 runs like a charm now. I would really suggest a complete OS upgrade. Maybe you have the possibility to backup your 32bit OS from the SD card to some connected harddrive, then it is a lot less work and you can get the most needed configs out of your old /etc directory.
Thanks a lot for all the suggestions! The whole issue is now clear. However, since I had a lot of trouble getting my NextcloudPi correctly set up for external access, I am really skeptical about the fresh install. @flow-axel Can you recommend any website/tutorial that may help recovering some of the previous settings (sounds like you did that). Any suggestion is highly appreciated. Cheers!
7fc3f7cf58