DVXplorer Micro external triggers

[Marco Cannici]

Dear all,

I’m reaching out to inquire about synchronizing a DVXplorer Micro with
an external device. While I know that the manual states multi-camera
synchronization is not supported, I wanted to check whether external
triggers can still be recorded through the connector on the back of the
camera. In my use case, I don't require clock synchronization via
daisy-chaining, but simply detecting a rising or falling edge from an
external trigger would be sufficient.

In DV, I can enable the options to detect falling/rising edges and run
the detector from the DVXplorer Micro's Capture node, and the software
does not complain. Could you confirm if this functionality is supported?
If so, could you also provide some info on how to wire the connector on
the back to enable this feature?

Thanks a lot for your support,
Marco

[Luca Longinotti]

Hello, this is not currently supported.

The small connector behind the rubber cap is not functional in any way right now.

-- 

Luca Longinotti (llongi)

Senior Software Engineer
iniVation AG - https://inivation.com/
A SynSense Group company