Hello! Yes, this behavior is expected, on the DAVIS you can get the biases into a weird state that

Hi Alessandra, Thanks for asking. We get those numbers via back-annotated 3D parasitic plus FET model

Dear inivation Team, I am currently using a DAVIS346 Mono and am examining how to adjust the event

It looks like a nice setup, quite practical and with cool optics modeling. Can you put a piece of

New dv-processing release, pretty much just fixes packaging issues on Linux. Release 2.0.2 - 31.07.

Dear Luca, Thank you for the suggestion. I simplified the setup as Laser--->Frequency Divider --

New week, new set of releases. Bug fixes/improvements for Python support and Windows mostly. All

Hello all! After quite some time, new releases of our software are available. All ChangeLogs are at

libcaer 3.3.16 was released last month, ChangeLog below. This will be the last release of libcaer (

Hello, the events look fine, so I assume your question is about frames and triggers. The frame

Is the pattern really repeatable? What if you flip the camera 180°, does it then change to be on the

The DAVIS346 Color is temporarily not available. We are working on a new batch as well as other

It's a sensor design issue. There's some internal corner cases where a pixel can deselect its

Hello, this is not currently supported. The small connector behind the rubber cap is not functional

We do not have IBIS files for these older chips. Just simulate it as a standard 3.3V GPIO, similar to

That is correct, for now that is the only option. A future release of the software might allow for a

Thanks Chenghan. Also this 2011 ISCAS paper from Christoph Posch explains and shows data nicely:

Any error from the installation procedure via pip? Maybe multiple versions of Python installed? Or

I see, if I am going to use it in the next step, I will check it for further details. 在2024年11月2日星期六

1. Correct, just in the other direction (eg. 10 times _smaller_ than diff). DVS128 and DAVIS are

Hi, I'm trying to figure out how to control the DAVIS346 AER through Labview to make it

Hello, we don't provide the CAD model of the case publicly. If you really need it, please contact

Hello, no, the DAVIS346 product has only USB as viable interface. You can connect that to the Linux

Dear all, I'm working on research on visible light communication using an event camera (DAVIS346)

By default you'll get that error as it tries to open a specific serial number but doesn't

Thanks Luca, tried your ROS driver and it works like a charm brgs Peter On Friday, June 21, 2024 at 8

Hello, can you elaborate? Current libcaer and dv-processing are thread-safe from ONE thread. If you

Hello, if you got your msys2 build working then that's fine. It should work just fine. A couple

The easiest would be to use the dv::visualization::EventVisualizer class to generate a cv::Mat and

Davis346 has resolution 346x260 (not QVGA exactly). Just take the address and right shift the x and y