CONTROLER SM2258XT G AB 240 GB
Rames Lopes
Does anyone know or have the correct loader for this device?
Master Controller model : ....................: SM2258XT
Chip id : ....................................: 0x2CB47832AA04
Vendor : .....................................: Micron
SSD state:
Wether it is in a ready state : ..............: Yes
Firmware working mode : ......................: ROM
SSD error code : .............................: 0x00(No error)
Whether SSD is locked : .....................: No
Whether in safe mode : .......................: Yes
Whether access user area : ...................: No
Whether access SA : .........................: No
Load loader...
Default Loader name : ........................: S1007A0 IM3D_00
Write default Loader : .......................: success
Load default Loader code : ...................: success
Obtain Loader version from firmware : ........: U0430B0 00 IM3D
Read Loader : ................................: success
Loader name : ................................: S1007A0 IM3D_00
Write to Loader : ............................: success
Execute Loader code : ........................: success
Rebuild parameter/seed table : ...............: success
Write ROMDebug Loader : ......................: success
Execute Loader code : ........................: success
SSD state:
Wether it is in a ready state : ..............: Yes
Firmware working mode : ......................: ROM debug
SSD error code : .............................: 0x00(No error)
Whether SSD is locked : .....................: No
Whether in safe mode : .......................: No
Whether access user area : ...................: No
Whether access SA : .........................: Yes
Load loader : ................................: success
Basic SSD information:
Read chip information : ......................: success
Chip id : ....................................: 0x2CB47832AA04
Vendor : .....................................: Micron
Flash type : .................................: 32L(B0KB) QLC 32k
Chip capacity : ..............................: 52608 Mb
channel number : .............................: 4
Chip number per channel : ....................: 2
Chip layers : ................................: 4
Number of logical units : ....................: 1
Number of chip storage blocks : ..............: 0x224
Number of pages per storage block : ..........: 0x1800
Page size : ..................................: 0x4000
Maximum retry level : ........................: 0x0
Warning: The number of detected chips (5) is not consistent with the given number of chips (8)!
Load relocation block table : ................: success
Load CP list......
CP list data is not found in HDD, use the default CP list!
Load CP list... : ............................: success
Read password information...
Read password information : ..................: Fail
Luke Coughey
--
Data Recovery Certification Group / for issue with google group please email sc...@myharddrivedied.com
---
You received this message because you are subscribed to the Google Groups "DataRecoveryCertification" group.
To unsubscribe from this group and stop receiving emails from it, send an email to datarecoverycertif...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/datarecoverycertification/19754ccd-98d4-4e5f-b25c-5d0237f84241n%40googlegroups.com.
t...@desertdatarecovery.com
SM allow manufacturers to alter the standard firmware on SM controllers. That’s why there are so many loaders. This one may not be supported. That and the fact its QLC and not seeing all parts of all chips probably means the NANDs have degraded (but that issue may also relate to incorrect firmware). As Luke says try PC3000 as they may have the correct loader.
Did you try to build the translator after uploading the stock CPs?
Tim Homer - Lead Engineer
Desert Data Recovery
From: datarecovery...@googlegroups.com <datarecovery...@googlegroups.com> On Behalf Of Rames Lopes
Sent: Friday, August 8, 2025 6:10 AM
To: DataRecoveryCertification <datarecovery...@googlegroups.com>
Subject: CONTROLER SM2258XT G AB 240 GB
Friends, I have an SSD with a SM2258XT G AB 240 controller, TOB brand, with chips 9FB2D NW852 7XB22 NW853 I THINK MICRON. I TRIED ACCESSING IT WITH SEVERAL LOADERS IM3D_00, but both gave errors, only one passed S1007A0 IM3D_00, BUT THE CP list doesn't load.
THE STRANGER THING IS THAT WHEN I TRY TO CREATE THE VIRTUAL TRANSLATOR IT RECOGNIZES IT AS 223.57 GB, with controller sm2258ab-80-100000000. When I try to test disk scanning tools, it recognizes it as 109.25 GB with controller sm2246xt. and I can test it, but I can't access the data
Does anyone know or have the correct loader for this device?
--
