WD SSD SHORTING POINTS

[Zyana It Solutions]

HI ALL I GOT WD GREEN 480GB SSD 

MODEL -WDS480G2G0A-00JH03

DRIVE IS IN READY STATE WITHOUT CAPICITY AND I AM UNABLE TO FIND THE SHORTING POINTS AND TERMINAL FOR THIS CAN YOU ALL PLEASE HELP ME WITH THIS 

THANKS PICS ATTACHED 

[pbzcbf...@gmail.com]

What are those two wires that are soldered to the row of pads at the edge of the PCB near C142?

[t...@desertdatarecovery.com]

Is that a 00469 controller?

If so its not encrypted and you can do a chip off.

VNR and FE supports it.

 

Tim Homer - Lead Engineer

Desert Data Recovery

t...@desertdatarecovery.com

www.desertdatarecovery.com

--
Data Recovery Certification Group / for issue with google group please email sc...@myharddrivedied.com
---
You received this message because you are subscribed to the Google Groups "DataRecoveryCertification" group.
To unsubscribe from this group and stop receiving emails from it, send an email to datarecoverycertif...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/datarecoverycertification/ab721257-7660-4552-b262-ce2fc45d8f90n%40googlegroups.com.

[Zyana It Solutions]

For terminal but i am not sure for these points 

On Tue, 20 Dec, 2022, 3:21 am pbzcbf...@gmail.com, <pbzcbf...@gmail.com> wrote:

What are those two wires that are soldered to the row of pads at the edge of the PCB near C142?

[Zyana It Solutions]

YES BUT I DON'T HAVE FLASH BOSS 

[Luke Coughey]

I'm curious what you are planning to do once you get it to safe mode without PC3K SSD support.

To view this discussion on the web visit https://groups.google.com/d/msgid/datarecoverycertification/96c78bab-5653-4fdf-9329-ba3948d8c1ban%40googlegroups.com.

[Zyana It Solutions]

sir we need to start the drive in ssd extended mode to proceed further and for this we need the shorting points and terminal 

To view this discussion on the web visit https://groups.google.com/d/msgid/datarecoverycertification/CAM_TZbEtPtRW8cQAabYTxpLBFtADyosbiONeUAZiyXq2DQL%3D5g%40mail.gmail.com.

[Luke Coughey]

Yes, but what I'm getting at is what can you do with it after that? I don't assume you have any special vendor commands as you don't even have the safe mode and terminal ports.  It isn't supported by PC3000 SSD, leaving me curious as to what tricks you have up your sleeves that the rest of us don't have.

Luke Coughey

CEO

Recovery Force Inc

866-750-3169

http://www.recoveryforce.com

This e-mail is intended solely for the person or entity it is sent to and may contain confidential and/or privileged information.  Any review, dissemination, reproduction or other use of this e-mail by persons or entities other than the intended addressee is prohibited.  If you have received this e-mail in error, please contact the sender immediately and delete and destroy this message, all attached material and all electronic reference from all computing based devices.

To view this discussion on the web visit https://groups.google.com/d/msgid/datarecoverycertification/CAM5EEgk58e%2B6%2Bpcod1wpk2nwpXut%2Bxxvk18Z%3DanGhS20%2B4JJkA%40mail.gmail.com.

[Zyana It Solutions]

nothing like that boss you all are working great at higher end i am just working to get at least partial access or something from translation of disk like many of ssd which company claim that its not supporting are done by randow workings or different ldr support. ace peoples says you can try for random loader loading may support the local brand ssds. 

To view this discussion on the web visit https://groups.google.com/d/msgid/datarecoverycertification/CAM_TZbE0dFN2Wpw5D91HudmqgUZSVBwve-Vas8EUM_%2BmyfGzqg%40mail.gmail.com.

[Arvika Michał Pawlikowski]

PC3K not support it so far (maybe in future). This cases can be recovered by FE or VNR by chip-off. Usually quite a lot of work with correction and assembling.