Update on Maintenance Release of v0.521

[Mack Hendricks]

Hi All,

As many of you know, the 0.52 release contained many regressions and we introduced some new bugs.  This has caused us to change the way we perform testing and our over all release management process.   The main changes:

- All new features has to have a unit test first - the unit test needs to be submitted with the new feature.  

- We will now have gated code check-ins.  This means that each Pull Request (PR) will trigger a build and will execute a number of unit tests.  If the tests fail, then the merge will be denied 

- We have test FreePBX and FusionPBX servers for testing critical features such as Domain Pass-Thru and FusionPBX Auto Domain Pass-Thru.  These servers will alls be available and will be used to support the gated code checkins.  

The v0.521 fixes can be found here: https://github.com/dOpensource/dsiprouter/issues?q=is%3Aissue+is%3Aopen+label%3A0.521

We have code committed and tested everything except for:

-Carrier Username/Password auth (aka issue #130 on the list above) 

-Anti-Flood Module Blocking Defined Carriers and PBX's (aka issue #148 on the list above)

These issues will be resolved before we release.  We are targeting the release later tonight or early morning.

ACTION ITEM:  Please pull this release and give it a try.  The one line pull would be:

apt-get update;apt-get install -y git curl;cd /opt;git clone https://github.com/dOpensource/dsiprouter.git -b v0.521;cd dsiprouter;./dsiprouter.sh install -all

[Paps Grey]

Thanks a lot Mack. I will try it and feedback soon.

[Rusty Miesner]

I pulled this release and still cannot get the Freepbx Passthru to work.  

[Mack Hendricks]

Can you provide a screenshot to your Domain setup screen.

Sent from my iPhone

--
You received this message because you are subscribed to the Google Groups "dSIPRouter" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dSIPRouter+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dSIPRouter/1eee376c-5af5-4144-aa0f-b3d20ef14128%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Rusty Miesner]

On Monday, April 15, 2019 at 8:43:50 AM UTC-4, Mack Hendricks wrote:

[Rusty Miesner]

On Monday, April 15, 2019 at 8:43:50 AM UTC-4, Mack Hendricks wrote:

[Mack Hendricks]

Can you login to the box and do:

cd /opt/dsiprouter

git branch

Let me know what it says 

-- 
You received this message because you are subscribed to the Google Groups "dSIPRouter" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dSIPRouter+...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/dSIPRouter/6b9dc643-6013-455d-8775-5515306fbf27%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

<dsip2.jpg>

[Rusty Miesner]

* master

On Monday, April 15, 2019 at 11:37:08 AM UTC-4, Mack Hendricks wrote:

Can you login to the box and do:

cd /opt/dsiprouter

git branch

Let me know what it says 

On Apr 15, 2019, at 11:21 AM, Rusty Miesner <rusty....@noahtekinc.com> wrote:

<dsip2.jpg>

On Monday, April 15, 2019 at 8:43:50 AM UTC-4, Mack Hendricks wrote:

Hi All,

As many of you know, the 0.52 release contained many regressions and we introduced some new bugs.  This has caused us to change the way we perform testing and our over all release management process.   The main changes:

- All new features has to have a unit test first - the unit test needs to be submitted with the new feature.  

- We will now have gated code check-ins.  This means that each Pull Request (PR) will trigger a build and will execute a number of unit tests.  If the tests fail, then the merge will be denied 

- We have test FreePBX and FusionPBX servers for testing critical features such as Domain Pass-Thru and FusionPBX Auto Domain Pass-Thru.  These servers will alls be available and will be used to support the gated code checkins.  

The v0.521 fixes can be found here: https://github.com/dOpensource/dsiprouter/issues?q=is%3Aissue+is%3Aopen+label%3A0.521

We have code committed and tested everything except for:

-Carrier Username/Password auth (aka issue #130 on the list above) 

-Anti-Flood Module Blocking Defined Carriers and PBX's (aka issue #148 on the list above)

These issues will be resolved before we release.  We are targeting the release later tonight or early morning.

ACTION ITEM:  Please pull this release and give it a try.  The one line pull would be:

apt-get update;apt-get install -y git curl;cd /opt;git clone https://github.com/dOpensource/dsiprouter.git -b v0.521;cd dsiprouter;./dsiprouter.sh install -all

-- 
You received this message because you are subscribed to the Google Groups "dSIPRouter" group.

To unsubscribe from this group and stop receiving emails from it, send an email to dSIPR...@googlegroups.com.

[Mack Hendricks]

You need to be on v0.521 release.

cd /opt/dsiprouter

git pull

git checkout v0.521

./dsiprouter.sh restart

Or do a new install using the v0.521 branch:

apt-get update;apt-get install -y git curl;cd /opt;git clone https://github.com/dOpensource/dsiprouter.git -b v0.521;cd dsiprouter;./dsiprouter.sh install -all

Note, the highlighted branch

[Rusty Miesner]

I did a uninstall and then used the command listed to reinstall but I will try again.

Thanks

 

Rusty Miesner

Director IT

Mortenson Family Dental Center

134 N Evergreen Rd Suite 200

Middletown, KY 40243

rmie...@noahtek.com

Office: (502) 254-8502

Cell: (502) 386 7953

[Mack Hendricks]

You have to be on v0.521 branch

If the branch doesn't say v0.521 you aren't on the maintenance release branch

[ga...@powertelecom.ca]

Upgrade does not get me 0.521 But a fresh install does, Thanks, I will start testing.

To unsubscribe from this group and stop receiving emails from it, send an email to dSIPR...@googlegroups.com.

[Rusty Miesner]

I forgot to delete /opt/dsiprouter after the uninstall and reinstall.  The passthru is working now so I can test.  Extensions register but voice quality is choppy.  I will continue to test..

Thanks

Rusty

[Gary Clarke]

I added -servernat to the end of the install script could that be my issue. I found in the past I needed behind nat to make it work.

apt-get update;apt-get install -y git curl;cd /opt;git clone https://github.com/dOpensource/dsiprouter.git -b v0.521;cd dsiprouter;./dsiprouter.sh install -all -servernat

--
You received this message because you are subscribed to a topic in the Google Groups "dSIPRouter" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/dSIPRouter/SA4hCVkkTho/unsubscribe.
To unsubscribe from this group and all its topics, send an email to dSIPRouter+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dSIPRouter/9572a964-c804-4027-94c5-7d96416b65cd%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

--

Gary Clarke
Power Telecom
Office: 905-564-8441 ext201
Fax: 905-970-9214
ga...@powertelecom.ca

Providing Custom
IP & Digital Communications

[Gary Clarke]

I made a post earler but it got deleted.

pass through is not working, I assigned pbx 1 and reloaded but it does not work, when I go back to domains it shows no pbx mapping but when I hit edit it shows pbx 1 ?

[Mack Hendricks]

Hey Gary,

What is the PBX ID of the PBX that you have defined?  It should start at 64?  Can you show the PBX being defined.   That PBX ID should be set in the Domain configuration.  

On Apr 15, 2019, at 1:59 PM, ga...@powertelecom.ca wrote:

Pass through does not work. see image, I have assigned pbx 1 and reloaded but it does not work, when I go back to domains it shows no mapped PBX's but when I press edit it shows pbx 1 ?

<dsiprouter.png>

To unsubscribe from this group and stop receiving emails from it, send an email to dSIPRouter+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dSIPRouter/b7d29a2a-227a-4727-98a5-7cb970f404e1%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

<dsiprouter.png>

[Mack Hendricks]

Just a quick update.  All of the fixes have been committed.

Let me know if you have any issues by tonight because I plan to do a release of 0.521

On Monday, April 15, 2019 at 8:43:50 AM UTC-4, Mack Hendricks wrote:

[Gary Clarke]

Before I enter any settings I remove all Carriers & Routes and then enter in my own accounts, I first setup a pbx connection which is automatically assigned ID 1

--
You received this message because you are subscribed to a topic in the Google Groups "dSIPRouter" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/dSIPRouter/SA4hCVkkTho/unsubscribe.
To unsubscribe from this group and all its topics, send an email to dSIPRouter+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dSIPRouter/a67aee2b-8d38-4ee4-bb65-74b5a194a5e8%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

[Mack Hendricks]

Never did that use case.  I will try to do this and let you know.  

Sent from my iPhone

<pbxID.png>

[Gary Clarke]

I found for some reason I had to reboot system after deleting items for it to start giving out new items from 1 and then move up from there.

[Mack Hendricks]

What OS are you using?

Sent from my iPhone

On Apr 16, 2019, at 8:06 PM, Gary Clarke <ga...@powertelecom.ca> wrote:

<pbxID.png>

[Gary Clarke]

Debian 9 x64 (stretch) 

 

Linux vultr.guest 4.9.0-8-amd64 #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08) x86_64

[Mack Hendricks]

Cool.  I will try to reproduce and see what the problem is.  

Sent from my iPhone

[Mack Hendricks]

I can’t reproduce…my steps are below.  Let me know if you have a test system that I can log into.

1) Installed a new version on Debian 9.8

2) Install dSIPRouter from v0.521 branch

2) Removed all Carrier Groups

3) Rebooted

4) Added a PBX and got assigned PBX ID 1

5) Created a Domain called muckiest.com and assigned it PBX ID 1

6) Clicked Reload

7) Clicked Edit to view it again as shown below

Also, I was able to do pass-thru registration using my softphone:

[Gary Clarke]

I should have thought of this earlier, I deleted Domain & reloaded then re entered still using pbx id 1 and it now shows correct in gui and it works.

Thanks, for your help.