How to load balancing outbound call with 2 asterisk

Luc Dang

unread,

Jul 15, 2021, 2:26:03 PM7/15/21

to dSIPRouter

I have 2 asterisk server (not Freepbx)

How to use dSIPRouter load balancing for outbound call Asterisk B if Conccurent call asterisk A = 10.

Mack Hendricks

unread,

Jul 16, 2021, 6:38:35 PM7/16/21

to Luc Dang, dSIPRouter

Can you explain the use case some more. Is outbound to a carrier or is outbound going to the Asterisk servers?

On Jul 15, 2021, at 2:26 PM, Luc Dang <lucluc123456...@gmail.com> wrote:

I have 2 asterisk server (not Freepbx)
How to use dSIPRouter load balancing for outbound call Asterisk B if Conccurent call asterisk A = 10.

--
You received this message because you are subscribed to the Google Groups "dSIPRouter" group.
To unsubscribe from this group and stop receiving emails from it, send an email to dSIPRouter+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/dSIPRouter/681b2a15-ff62-4cfe-b57b-07405234b0c8n%40googlegroups.com.

Mack Hendricks

unread,

Jul 16, 2021, 6:38:36 PM7/16/21

to Luc Dang, dSIPRouter

Can you explain the use case some more. Is outbound to a carrier or is outbound going to the Asterisk servers?

On Jul 15, 2021, at 2:26 PM, Luc Dang <lucluc123456...@gmail.com> wrote:

I have 2 asterisk server (not Freepbx)
How to use dSIPRouter load balancing for outbound call Asterisk B if Conccurent call asterisk A = 10.

Luc Dang

unread,

Jul 16, 2021, 11:40:16 PM7/16/21

to Mack Hendricks, dSIPRouter

Hi Hendricks,

i have 1 number from carrier, My PBX A use trunking with carrier perform outgoing call from number of carrier, 1 DSIPRouter, 2 Fusion PBX (To Handle Media, I replacement Asterisk by Fusion PBX, DSIPRouter Routing call to FusionPBX) and i want to load balancing call between 2 Fusion from DSIProuter when i perform outgoing call from My PBX A, If Conccurent Call FusionPBX A =10, DSIPRouter will Routing FusionPBX B )

This is my call flow out going call:

PBX A (Perform outgoing call from carrier) -> DSIPRouter (Load Balancing between FusionPBX A, B) -> FusionPBX.

How to config in this case ?

Hendricks <a...@goflyball.com> đã viết:

Mack Hendricks

unread,

Jul 17, 2021, 11:50:52 AM7/17/21

to Luc Dang, dSIPRouter

You can split calls up by percentage within the Endpoint Group to each FusionPBX server - we don’t support setting a current call limit at the Endpoint level. So, the PBX would be defined as a carrier in dSIPRouter and the FusionPBX’s would be defined as endpoints within an Endpoint Group.

Sent from my iPhone

On Jul 16, 2021, at 11:40 PM, Luc Dang <lucluc123456...@gmail.com> wrote:

Luc Dang

unread,

Jul 17, 2021, 12:07:53 PM7/17/21

to Mack Hendricks, dSIPRouter

Hi Hendricks,

You can split calls up by percentage within the Endpoint Group A,B to each FusionPBX server -> So i create 2 Endpoint Group for each Fusion and fill "Max Current calls" i want to limit ?

When Group A reaches the call threshold i set, when will Group B be active?

Vào Th 7, 17 thg 7, 2021 vào lúc 22:50 Mack Hendricks <a...@goflyball.com> đã viết:

Reply all

Reply to author

Forward